Question about Chevrolet Colorado

1 Answer

Rear lights don't come on with headlights brake lights work hazards & turn singals work

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Chevrolet Master
  • 808 Answers

The tail lights are on a separate circuit bad bulbs or fuse labelled TM or tail lights in fuse box.

Posted on Nov 05, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 275 Answers

SOURCE: Brake lights/turn signals don't work when headlights on

its probably a bad alternator check it and make sure its workin right if its not that then it could be the voltage regulator do the blinkers come on but not blink

Posted on Nov 12, 2008

  • 1 Answer

SOURCE: Chev Cavalier 2003 only one rear turn/brake/hazard light

I have a 2002 Chev Cavalier that had the same exact problem. I replaced the bulb harness (purchased from a chevy dealership for around $5) which was fairly easy to do. I have had zero problems with it since.

Posted on Dec 03, 2008

  • 1 Answer

SOURCE: brake lights/rear turn signals

I had the same problem with my 1999 Yukon. The electric board needed to be replaced. Rust starts to build up and shorts out or blows the bulb. The dealership charged $73.60 for the part and I installed it myself (Saved $30).

Posted on Jan 05, 2009

co7196
  • 3433 Answers

SOURCE: headlights work but dash lights and parking lights are dead

dash and tail sre tied together, so chk tail light fuse.

Posted on May 13, 2009

  • 1986 Answers

SOURCE: 1994 chevrolet pickup - brake light problems

There will be an electronic flasher module located under your dash near the steering column (don't know it's exactly location as it varies). It sounds like this unit may be faulty.

Posted on Aug 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why aren't hazard lights or brake lights working?


Brake lights /rear hazard lights not working - Ford Truck ...

www.ford-trucks.com > ... > 1967 - 1972 F-100 & Larger F-Series Trucks
Jul 9, 2010 - After checking the brake lights I tried the emergency flashers and found that they are working in the front but not in the back. I do have rear turn ... 1995 F350 Brake Lights / Turn Signals not working
Jul 9, 2012
Turn Signals and Brake Lights Do Not Work
Mar 10, 2012
Turn Signal, Brake Lights, & Rear Hazard not working
Aug 3, 2010
Rear Turn Signals, Hazards and Brake Lights not working....
Aug 29, 200

Sep 30, 2015 | Cars & Trucks

1 Answer

Hazard lights malfunction


YOU MIGHT HAVE A BURNT OUT RELAY IN FUSE COMPART UNDER YOU CARS HOOD CHECK THAT OUT THRU YOUR CARS MANUAL,IT WILL SHOW YOU WHICH RELAY IT IS?

May 24, 2013 | Cars & Trucks

1 Answer

2011 Expedition left rear blinker light not working even after replacing bulb...also, brake bulb does not work with hazards, but does work with brakes and headlights...ideas?


In my experience, when the hazards are on, the brake lights are not supposed to indicate braking in this day and age of automobiles. In other words braking lights will not override the hazards when hazarding. I believe the 3rd or high mount brake light should work when hazarding and braking at the same time to indicate you are braking. I find it very seldom is there the need to drive and have the hazards on....in torrential rain going at low speed perhaps. Anyway, hope this was helpful. If not, I apologize.

Jan 10, 2013 | Ford Expedition Cars & Trucks

1 Answer

Rear lights not working on 2002 suzuki grand vitara


In the underdash fuse/relay box, the 15A TAIL fuse feeds power to the coil of headlight relay 2. When the combination switch is set to TAIL, the relay closes and the outer tail lamps light. In the same underdash fuse/relay box, the 20A STOP fuse feeds power to the brake light switch. When the brake pedal is pressed, the inner brake lamps light. The underdash fuse/relay box also contains the 10A TURN BACK fuse which feeds power to the hazard switch and the turn signal relay. Relay output is fed to the combination switch and turn signal power is applied to the selected middle tail light. The fourth fuse in the underdash fuse/relay box is the 15A HAZARD fuse which feeds power to the hazard switch and turn signal relay. When the hazard switch is set, the turn lamps on both sides begin flashing.

Sep 18, 2012 | 2002 Suzuki Grand Vitara

1 Answer

Brake lights don't work when headlights are on. When brake is pressed turn signals go fast and when brake is pressed when headlights are on they are so dim you can't see them plus turn signals...


{: ) Looks like your lightings got haywired. Have you had vehicle repairs recently? Anyway, it seems that you have poor grounding connections for the affected lightings. Some circuits share common ground, and ground terminals are strategically distributed on the vehicle. If these grounds don't have good contact with the body, chassis, or engine ground, circuit functions are badly affected. Thats why these ground points should be inspected and kept clean and tight, maintain that good wire and terminal contacts.
We can start with G100 located at the Left Front of the Engine Compartment on the left front body mount. See diagram below:


wyet_helps_24.gif Check out also G401 which is located in the chassis harness, mounted to the left rear Body mount. This ground point is shared by the rear lamps like the brakes, reverse, and rear signal lamps.
If possible check also other ground points that you may visually come across while on your search. Be sure also that fuses are all inspected good.
I hope we get lucky in finding and fixing a certain lamp function, if not all. Goodluck.

Aug 10, 2011 | 2004 GMC Yukon

1 Answer

When I turn on the light, only the headlights get turned on. The rear lights do not turn on. Both signal lights are okay. Hazard lights work. Brake lights work.


visually check condition of bulbs,they are 'dual filiment' bulbs,there are 2 fine wires or 'filiments' that light inside bulb.one may have broken,but not the other[the brake & hazard]

Sep 30, 2009 | 2006 Toyota Sienna

6 Answers

No rear brake light / turn signals on 2001 Chevy Cavalier


The problem is the turn signal/headlight/hazard switch assembly on the steering column which the brake light wiring runs through. The part is easy to change and cost about $50 at most parts stores

Jul 05, 2008 | 2001 Chevrolet Cavalier

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...