Question about 1994 Volkswagen Jetta

Open Question

Adjust clutch pedal pedail

I put in a new clutch not long ago and the 5th wont work and the reverse any suggestions,?

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

lobsterman72
  • 91 Answers

SOURCE: tdi clutch pedal pushed all the way down but hard to shift gears

Check your clutch fluid level, sometimes a seperate reservoir (drivers side on firewall), some clutch systems take fluid from the brake system (check brake fluid). If thats ok then the clutch slave may be failing.
If the clutch fluid is low refill it and check for leaks (or just wait till the symptom comes back). If it's happens often then theres a leak in the line or the slave somewhere.

Posted on Jul 08, 2008

  • 119 Answers

SOURCE: Clutch pedal goes to the floor(new clutch installed 2 wks ago)

that cable fited one side to cluch pedel and ather side fited gear box side where palte which is relecing clutch bearing. dont forget to adjust.

Posted on Dec 01, 2008

  • 345 Answers

SOURCE: How to adjust clutch vw golf 1.4 1997 or changing

good point but even if it is the cable one its automatic,hydraulic is non adjustable.if it is the cable operated one the clutch is mounted to the back of the flywheel,nothing difficult but you will need the round alignment tool,if its hydraulic it could have a dualmass flywheel which it is advisable to change thats a straight forward job to do is it a 1j chassis build 7th and 8th digit of the vin number

Posted on Dec 30, 2008

  • 271 Answers

SOURCE: tranny problem 1st gear wont work really and its

There is problem in the gearbox.The sincronizers for a first & second gear are on the same gearswitch.Need to change them.Forget about the clutch.

Posted on May 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 pontiac sunfire manual transmission wont shift


Does the clutch pedal engage? This sounds like a clutch problem to me.

May 25, 2012 | 1996 Pontiac Sunfire

2 Answers

The clutch pedal is too high. how to adjust in order to lower the clutch pedal


its a automatic adjusting cable on this vehicle so if pedail too hight then its a new clutch

Apr 25, 2011 | 1996 Volkswagen Jetta

1 Answer

Hey ill push the clutch pedal in then it will make a snap noise then i wont have any clutch then when it comes back it clicks theres a new clutch on it hasent been used in 7 years


i think either your clutch cable is seized and needs lubricating , or the pressure plate teeth on clutch plate housing have broken , maybe from sitting for so long or improper fitting years ago , maybe also your clutch plate is siezed against clutch plate disc . but i think one of the first 2 suggestions most likely..

i have seen cases where even after new clutch plate teeth have been broken from un correct adjustment of clutch pedal and cable when fitted , but i think you wont have much luck getting warranty after all that time !

i hope for you replacement of cable is answer .. good luck

Oct 09, 2010 | 1983 GMC S-15 Pickup

2 Answers

My car wont move when in gear. i can go into 1,2,3,4 gear without using my clutch. cant go into 5th or reverse. now my clutch wont reject back. my friend did a burnout on my car before this happened


Can you pull the pedal back by hand? It's hard to tell what damage has been done without looking at the problem(s), but either the clutch hydraulic system has somehow locked in the 'release' position, or the clutch itself has disintegrated. Best not to let 'friends' abuse your car. Suggest taking the car to a respected service shop and prepare for a fairly large bill.

Mar 31, 2010 | 2003 Honda Civic

1 Answer

My 92 honda accord will not go into 1st 3rd or 5th gear


check shift fork adjustment. make sure you bleed the slave cylinder.also check shift cable adjustment.

Apr 11, 2009 | 1992 Honda Accord

1 Answer

Truck wont move in gear [manual trans] why?


push the clutch pedal all the way and see if the slave cylinder pushrod is going out at least an inch, if not replace the slave cylinder, if it does goes out, sad to say but you have problem somewhere else inside your clutch assembly

Jan 28, 2009 | 1990 Toyota 4Runner

3 Answers

Reverse wont work properly, sometimes have to pull hard


The transmission type wasn't specified as to manual or automatic,as both were available on 91-96 Stealth's,but from the complaint,i presume manual trans.If it is the manual trans,5th gear and Reverse gear are usually on the same shift rail.So part of the diagnosis is to pay attention to 5th gear for any problems.Another part of the diagnosis is the clutch pedal and hydraulics that activate the clutch.When the problem is happening,try this:pump the clutch pedal rapidly,and repeatedly,then try to engage Reverse.If it goes right into Reverse,then the clutch hydraulic system needs to be inspected.Good luck.

Jul 25, 2008 | 1995 Dodge Neon

1 Answer

Trans/clutch


im sorry the clutch cable wont help you here. you have a bent shifting fork that will not allow the trans to completely engage into the gear. put power to it and it pushes it out of gear.
sorry it need to come apart.

Jul 23, 2008 | 1998 Chevrolet S-10 Pickup

Not finding what you are looking for?
1994 Volkswagen Jetta Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...