Question about Cars & Trucks

1 Answer

Suzuki alto (2011) 7 pin trailer wiring, wires don't match the colours in the instructions

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 22,095 Answers

Iam colour blind red/green and i suspect you are too as a lot of males are and most dont even know it ,Anyway simple way out of this is to use one of them electrical 12v test screwdriver or a multimeter like i have to ,never trust colour on wires on a motor vehicle as they use any colour in the looms depending on what been used up and what stock is available ,the assembly line cannot be held up because the colour of the wire is different .

Posted on Oct 18, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75235 Answers

SOURCE: Identifying color coded wires for trailer hookup

get a cheap 12 volt test ($6 any parts store) light and have someone operate the different lights while u proble the wires, when the test light illuminates you tag that wire for what circuit was activated, brake, running, turn etc.

Posted on Mar 24, 2009

  • 18 Answers

SOURCE: trying to wire truck to n\trailer hitch need wiring instructions colors do not match

if you go to a hitch shop they usually have a plug that fit to stock harness for a price but its easier and safer

Posted on Apr 25, 2009

  • 138 Answers

SOURCE: suzuki sidekick trailer wiring, 1994

Usually the easiest place is inside the passengers side quarter panel just in front of the taillight.

Posted on Jul 02, 2009

pops296
  • 174 Answers

SOURCE: trailer wiring colour codes

try http://www.etrailer.com/faq-wiring.aspx. They may have that info.

Posted on Jan 29, 2010

  • 280 Answers

SOURCE: Fitting trailer wiring to peugeot partner van.

Hello, if you have a test light handy with a sharp tip on one side than, start with your parking lights on and check to see which wire it is, if you have a heavy bag of potatoes or similar, you can use this when it comes to the brake lights :)

Posted on Feb 18, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lets start again I have a 2005 falcon wagon I want to trailer plug cannot buy the plug in harness the diagram does not match the colours seems duplicate wires auto elec are 120 mile away H E L P


You need a tester so you can do a test,like when you hold brake down,do you get 12 volts on both brake bulb wires?
Get a tester and learn to use it is all I can say,or take it to someone good on electrical. don-ohio

Dec 24, 2016 | 2005 Ford Falcon

1 Answer

I need to find the correct wires to join from the loom to the trailer the diagram i have does not match the colours for instance there is no yellow how do i match the right ones up to the trailer


Use a voltmeter and see which wires in the loom show power when (1) tail lights are on, (2) brake lights are on, (3) each turn signal is on, and (4) which shows continuity with vehicle ground/earth. Match these up with the appropriate wires in the trailer harness.
If your brake lights and turn signals are the same bulb on the towing vehicle, you're all set. If they are different bulbs, you'll need an adapter to get both brake lights and turn signals to work on the trailer.

Dec 24, 2016 | Cars & Trucks

1 Answer

Good morning my 2011 Suzuki alto radio and central locking stopped working at same time is it a fuse in which case which one as all seem ok


separate fuses
if all seem ok

not much information out there on the internet
for 2011 Suzuki alto
radio may need a security code

Oct 21, 2016 | Suzuki Cars & Trucks

1 Answer

What fuse, controls the trailer lights plug on 2011 F 150


the same fuse that controls the lights on the vehicle as the trailer plug is attached to the vehicle light wires . If you have a problem with trailer lights then check the wires in both plugs and make sure that you have the trailer earthed through a pin in the plugs and not through the tow ball.

Aug 20, 2014 | Cars & Trucks

1 Answer

Wire colour code


This should help.trailer26.jpg

Dec 28, 2013 | Cars & Trucks

1 Answer

Electrical Wiring diagram for Suzuki Alto


We do not have wiring diagrams, sorry

Feb 16, 2012 | Cars & Trucks

1 Answer

Fitting trailer wiring to peugeot partner van. need to know van wiring colours, dont match trailers wiring colours


Hello, if you have a test light handy with a sharp tip on one side than, start with your parking lights on and check to see which wire it is, if you have a heavy bag of potatoes or similar, you can use this when it comes to the brake lights :)

Feb 18, 2011 | 2006 Peugeot 604

1 Answer

Car to trailer wiring problem


most likely the trailer wires dont match the truck wires. you will need to verify that the truck is wired correctly and then that the trailer is wired to match your truck. problems usually arise after someone has BORROWED a tralier and made the trailer wires match THEIR truck trailer wiring here is standardized but people wire them up any way the can, and it causes problems when that trailer is borrowed or sold.

Oct 03, 2009 | Toyota Land Cruiser Cars & Trucks

1 Answer

The wires on my 03 suzuki aerio got ripped out when a tire blew now i dont have a head light how would i fix that?


find both ends that have been ripped out, expose the wires by unwrapping the insulation tape or whatever it has around them, they will be colour coded, clip the damaged ends off the wires and buy some wire joiners and match the wire colours up and put them back together. If the wire are now too short you will have to use some electrical wire to rejoin them

Jun 22, 2009 | 2003 Suzuki Aerio

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...