Question about 2000 Ford Mustang

1 Answer

2000 mustang gt has hot battery, but nothing works, no horn, headlights, dash, remote won't work correctly. Put a 12 volt tester on the positive cable and ground to the engine and the tester lights up.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 61 Answers

Check power suply relay is the must powerfull relay in the car and the fuses

Posted on Oct 18, 2013

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
smartr10U
  • 1305 Answers

SOURCE: i have no headlights on 1988 mustang gt

Check headlight lamps... then follow the wiring from the bulb connections back and make sure you're getting a good solid ground connection. It may have a loose, broken, severed grounding wire.. it's usually attached to the car body at some location not far from the headlights.

Posted on Oct 14, 2009

BCAS1298
  • 3092 Answers

SOURCE: 2001 mustang gt,all access. work fully charged

Check your neutral safety switch with test light.

Posted on Nov 27, 2009

  • 58 Answers

SOURCE: 94 MUSTANG GT,STARTER CLICKS BUT WONT CRANK, NEW

When you installed the starter you may have inadvertently put the gears in a bind. Make sure the bendix meshes properly with the flywheel. The bendix is the small gear on the starter that slides out and connects with the flywheel when the ignition key is turned.

Posted on Oct 09, 2010

Testimonial: "thanks"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why will it crank but won`t turn over?


Have you checked for correct fuel pressure? Most parts stores have a loan-a-tool fuel pressure gauge kit, and if you remove the plastic engine cover you will find a fuel rail port to attach the tester. Just because you replaced with new pump, don't assume it is good. Many cheap aftermarket pumps are noisy and fail often.

If pressure is good, insure you have spark to the plugs.

May 07, 2015 | 2000 Cadillac Escalade

2 Answers

Is there a fuse for the horn on a 2000 Chevy Malibu?


fuse for horn on a 2001 malibu is located under the hood.
there is a fuse (15 amp) in slot #43
and there is a relay in slot #21
if you remove the relay and put it back in wrong the horn will not work.

fuse-horn-2000-chevy-malibu-i42l1bq1qrxu2fudnsefqnkk-4-0.jpg

Sep 26, 2014 | 2000 Chevrolet Malibu

2 Answers

2000 mustang gt. The theft light is on and wont


When the car is off, a slowly flashing anti-theft light is normal. When the key is in one of the on positions, that light should go off. If it thinks it detects a theft condition, the light will flash quite rapidly and prevent starting. You can also check the mileage readings in the odometer display. If you see dashes instead of numbers, that is a clue that some part of the onboard computer has gone wacky.

You already tried one of the steps that I would recommend (unlocking the door, though that may not be enough by itself. Here are a couple of things to try.

First, pray that this isn't the anti-theft computer gone awry. That is uber expensive to replace. Following that prayer ...

Verify that the battery is fully charged and showing about 12.8 volts with the headlights off and about 12 volts with headlights on. If the voltages are low, try jumping the battery to see if you can get it to start. (A low battery can occasionally cause an anit-theft fault.)

If you have another key, try that one. The chip in the first key may have gone bad. If that doesn't work ...

Disconnect the battery negative cable for 5 minutes. Reconnect, and lock and unlock the doors several times with the remote. Check to see if the anti-theft light is still flashing rapidly. If not, try starting.

Anything more than these steps will need to be handled by a qualified shop. (For example, a wire in the steering column could be damaged by the tilt mechanism, or the computer malfunctioning).

Good luck.

Sep 15, 2014 | 2000 Ford Mustang

1 Answer

2000 ford mustang gt Turn on key and no power, no


if its a handchiffted gearbox put in highest gear.
puch the car to the front and back till you hear a click.
if he starts .check the ignition.if this is not correct the car have a death spot.

Oct 18, 2013 | 2000 Ford Mustang

2 Answers

Disconnected battery in 2007 gmc Yukon. Dash lights and radio work. Engine won't crank. Remote won't work. How to reset?????


kindly pls check the BCM which is located under the left side of the dashboared i hope that will help.

Mar 30, 2013 | 2007 GMC Yukon

1 Answer

Headlight on rx 300 lexus won't work even after changeing the bulb


have a tester handy.unplug the light and then turn on the headlights.with tester on 12 volts test plug to see if you have 12 volts. if not the plug is properly corroded or shorted .

Nov 24, 2011 | 1999 Lexus RX 300

1 Answer

Horn not working looking for fuse


First check fuse then relay. If trouble finding obtain repair manual.
Basic diagnostic method is to start at the horn(s). There should be two wires. One is negative the other positive. If connections good. You will need a voltage tester and a jumper lead. A simple 12 volt bulb can be used as a tester. Pull one of the horn wires and attach tester then attach other tester lead to negative. Test horn. If no indication repeat with other horn wire (don't confuse horn connections). If voltage present Horn defective. Next check for voltage at relay. If voltage in to relay but not out replace relay. If no voltage in to relay replace fuse. If still not found then problem is with horn switch or wires between.

Jul 02, 2009 | 1996 Chevrolet Cavalier

1 Answer

I need a fuse box diagram for ford mustang gt 2002


it is normally in the lid of the fuse box and in your owners manual but a dealership can also print you out one also you can get a 12 volt tester and locate the blown fuse that way

Feb 04, 2009 | 2002 Ford Mustang

Not finding what you are looking for?
2000 Ford Mustang Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...