Question about Jaguar Cars & Trucks
Its possible that you have to dismantel the front bumper to get it,
tip there are some protectors to get .transparent to go over the ,
Posted on Oct 18, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Take out the small screws that hold your turn signal/marker lights on. This will allow you to reach in and undo the three (if I remember right) 10mm nuts on the back of the fog housings that hold them in the bumper. Once they're removed, press on the back of the fog housing and the foglight assembly will pop out of the bumper. Then you can replace the bulbs.
What I did on my Z is something you might consider - while I had them out, I took them apart (just a couple screws and bolts, very easy). Open it up so that you have access to the glare guard - the cup that sits in front of the bulb. This blocks forward projection of the light, and instead bounces it onto the reflector to be spread very wide (but not far forward) in a fog beam pattern. I used pliers to physically break the guard off the housing, so that instead of a wide, shallow fog pattern, I had a forward-projecting driving beam. I also swapped the 35w OEM bulbs for 55w higher-output superwhite bulbs (this increase in power consumption is not enough to cause any risk to the wiring or fusing, by the way - it worked for years for me). Then put them back together and reinstall them - you'll find a drastically improved light pattern for night driving, and they're still low enough to the road to cut under most fog. Especially since I always felt that the Z headlights were pretty pathetic for output (at least until I installed HID lighting), this was a great mod to make to the car.
Posted on Sep 04, 2008
SOURCE: Changing bulbs in fog lights
Hi this is a bit of a hair raiser, first of all you need to turn the wheel all the way into the motor, left or right depending .
The plastic cover underneath is only held on by some screws and retainers take these out, the cover will be loose but won't come out, gently pry it away from the fender, reach behind and unscrew the bulb housing. Be warned there are two or three different bulbs on the market take yours out before heading off to your local spare parts dealer, it might save you the time of having to go again.
hope this helped
Posted on May 30, 2009
Posted on Jul 15, 2009
Park the Dodge Caliber on a flat paved or concrete surface. Turn the steering wheel all the way to the side opposite the headlight you are replacing. In other words, if you are replacing the left headlight, turn the wheel all the way to the right. Apply the parking brake and release the hood latch.
Posted on Dec 28, 2009
Tips for a great answer:
Dec 11, 2013 | Cars & Trucks
Jan 29, 2012 | Citroen Saxo Cars & Trucks
Jul 27, 2011 | Subaru Forester Cars & Trucks
Apr 30, 2010 | 1999 Oldsmobile Alero
Nov 05, 2017 | 2005 Chevrolet Colorado
Jun 16, 2009 | Buick Regal Cars & Trucks
Nov 12, 2008 | 1999 Lexus RX 300
Aug 08, 2008 | 2002 Hyundai Santa Fe
42 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: