Question about 1997 Chevrolet C1500

Open Question

1997 chevy c1500 truck right rear turn signal problem

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 12 Answers

SOURCE: knock sensor for 1997 chevy C1500 Pickup Truck

Located on right hand side of block (pass side). It is between motor mount and starter.

Posted on Nov 27, 2008

Ad
  • 2 Answers

SOURCE: Fuel pump and electrical

its very likley that your fuse is blown. If you look it should be something like injectors a+b

Posted on Mar 06, 2009

dennymulford
  • 1055 Answers

SOURCE: rear brakes locked up. 1990 chevy c1500 2wd pickup

did you see if they need replaced?
and also the emergancy cable may be froze

Posted on Aug 12, 2009

  • 4 Answers

SOURCE: 99 Chevy Tahoe... Rear turn signals, brake lights, and hazards

I had this problem, and to be honest, it happened to the left side about a week later...it's the board that the bulbs plug into...it's a very common problem with this model. So popular that you can normally get the socket board off the shelf at a parts store! it's extremely simple to replace, and I replaced all the bulbs at the same time!

Posted on Oct 11, 2009

alicantecoli
  • 22156 Answers

SOURCE: 2004 Chevy Malibu turn signal issues

check the bulb with a test meter and alsof or a feed

Posted on Nov 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change the ignition cylinder on a 97 Chevy c1500 if can't turn key to on/run.


You need to remove the steering wheel , turn signal control and in the steering column you will find a pin that holds the tumblers in place for the key switch. You can remove the pin and then remove the key tumbler and replace it. Go to You Tube and they have videos on just what you need to do to remove the steering wheel and etc. Hope this helps.

Apr 03, 2015 | 1997 Chevrolet C1500

1 Answer

I have a 1992 chevy c1500 with light issues. Left turn signal works fine, right side blinks like 4 ways,along with license plate light.when head lights are on nothing for right side turn signals. Hazards...


It seems to be a ground defect on right side. Do you have the same bulb's number . What about the front flasher. remove right rear lamp assembly remove connector measure voltage between ground and current .reconnect it measure voltage at bulb socket. you should find your problems
hope it helps

Dec 07, 2014 | 1992 Chevrolet C1500

1 Answer

WHERE ARE THE GROUND WIRES FOR THE FRONT TURN SIGNALS LOCATED ON A 1994 CHEVY C1500


try moving the wires around the socket or could be the flasher

Apr 24, 2014 | 1994 Chevrolet C1500

3 Answers

1996 chevy 1500 truck when i turn left turn signal on back up lights come on and when i turn the right turn signal on the emergency blinkers come on. The front blinkers work correct.


Hello: There are two things that could be dausing this: One is the board that holds the bulbs in the tail light assembly, it could be shorted internally. The other thing is on the rear right fender on the inside there is a electrical distribution box for the rear lights it also could be internally shorted, also the connectors to that box could be corroded and causing your problem. Hope this helps.

Nov 09, 2011 | 1996 Chevrolet C1500

1 Answer

Right rear brake light on 1997 chevy truck not working?


take whole light out and look at bulbs they may be corrosion built up on them

Mar 23, 2011 | 1997 Chevrolet C1500

1 Answer

1994 Chevy Silverado+C1500 Extended Cab-Front Lights Work - all Rear Lights out. Turn signal also acting weird. Someone suggested may be turn/hazard switch. Does this sound right? If so, where is the...


Run a new Temporary ground strap from your bed to your frame ,make sure that there is a GOOD connection with no rust . If it works then make a good one . It is a quick check that often works .

Dec 27, 2009 | 1994 Chevrolet C1500

1 Answer

Tryng to figure out what looks like inside of drum brakes of a chevy 1997 C1500 truck


very simple, just remove the wheel, then remove the drum and there you go, the inside of the rear drum brakes.
if you plan on taking stuff apart your better have the proper tools and knowledge before you go any further.

Oct 12, 2009 | 1997 Chevrolet C1500

1 Answer

Turn signals and brake lights won't work on my


try replacing the flasher first. and check the two fuses for hazards and signals.

Sep 19, 2009 | 1989 Chevrolet C1500

2 Answers

Knock sensor for 1997 chevy C1500 Pickup Truck


Located on right hand side of block (pass side). It is between motor mount and starter.

Nov 27, 2008 | 1997 Chevrolet K1500

Not finding what you are looking for?
1997 Chevrolet C1500 Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...