Question about 1999 Kia Sportage
Just check in the engine bay near the battery, that's where it should be located
Posted on Oct 22, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
brown to the tail lights. yellow to left turn signal. green to right turn signal. this is a basic 3 wire hook-up i use all the time w/4wire connectors for all trailers. white wire is not used. ground is established when you hook to the ball.
to find the correct wire to splice to, use a testor (has a clip to the bare wire, and a sharp point to the truck frame). using a needle, push it through a wire to rear light harness. turn on the turn signal. check if the connection is the blinker, testing until you have the blinker wire. the tail lights can be attached to the license plate wire. brakes and blinkers use same wire, so brake lights will work whenever the turn signal is attached.
to be sure everything is working right, have a second person go inside the truck and work the signals, brakes and lights one at a time while you are at the back of the trailer telling what to do.
Posted on Dec 07, 2008
SOURCE: 1997 kis sephia wire harness
the best way to go about this is to buy the wiring harness adaptor for your car. it plugs into your factory wiring plug, and the wires from the harness adaptor are color-coded to match the colored wires on your stereo. just match them, splice them, and your done.
If you already cut the harness, then I reccommend reattatching the wires that you cut, and just getting the wiring harness adaptor. trust me, for only like ten or fifteen bucks, it will save you alot of hassle. if thats not an option, then the best thing to do would be to get a digital volt/ohm meter. use that to find your constant, switched, and ground. you can also check for continuity to find speaker wires. you can pick one up at an auto parts store for fairly cheap. if you need more info on how to use the meter, and what to check for, then contact me through this site, or repost. ill be glad to clarify anything for you. good luck...
Posted on Aug 08, 2009
Tips for a great answer:
Apr 26, 2014 | 2001 Kia Sportage
Feb 21, 2013 | 1995 Kia Sportage
Keep a regular schedule for inspecting the spark plugs on your 2002 Kia Sportage. According to the official 2002 Kia Sportage owner's manual, spark plugs and ignition wires should be inspected every two years or 48,000 miles, whichever comes first.
Let your 2002 Kia Sportage sit for a few hours before opening the engine compartment. You want to make sure that the engine is cool before you begin working on it.
Pop open the hood of your Sportage and locate the ignition wires, which will be attached to the top of your engine. The 2002 Kia Sportage has a four-cylinder engine, meaning there are four spark plugs each attached to an ignition wire. The ignition wires run from the engine to the fuse box, which is located in the left side of the engine compartment.
Inspect the ignition wires of your 2002 Kia Sportage. These wires will need to be replaced if they appear worn.
Disconnect the ignition wire to your spark plugs. Grab the rubber boot located near the base of the wire and pull upward instead of yanking on the wire. Remove only one wire at a time, or mark the wires with a colored Sharpie marker before disconnecting all of them. Improperly reconnecting the ignition wires can seriously affect the performance of your Kia Sportage.
Attach the spark plug socket to your socket wrench. Use the socket wrench to remove the spark plug from the top of the engine's cylinder.
Inspect the spark plug. There will be some soot, but if the spark plug is completely covered in soot, it needs to be replaced.
Position your replacement spark plug in place and secure it with the spark plug socket on your socket wrench. Be careful not to overtighten the spark plug after it has been snuggly fitted.
Position the rubber boot of the proper ignition wire in place above the spark plug and insert it with your hands. Close the hood of your 2002 Kia Sportage
Mar 16, 2011 | 2002 Kia Sportage
Jun 26, 2010 | 2006 Kia Sportage
Jun 01, 2010 | 2001 Kia Sportage
May 23, 2010 | 2002 Kia Sportage
Jan 20, 2009 | Kia Sportage LX Cars & Trucks
61 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: