Question about Chevrolet Cruze
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
P2096=Post Catalyst Fuel Trim System Too Lean Bank 1,
drivers side was too lean at one time and set code,You should hhave the code erased and see if it returns again,
Posted on Dec 29, 2009
put a new rear O2 sensor and it fixed it. Only problem you might have is if you have an aftermarket downpipe. If it is Catless then you are going to need some type of tune, opensource, Cobb AP, etc.... Even if it is a high flow cat then you will still need a tune because it will throw a code 75% of the time. If your stock cat is still on then replace your rear O2 sensor and that should fix it. Could be something else but mine was the exact same problem.
Posted on May 29, 2010
If the O2 sensors are working correctly, it could be an air leak or a faulty injector. Usually low fuel pressure shows up on both banks.
Posted on Jan 15, 2014
Tips for a great answer:
Mar 17, 2015 | 2009 Pontiac G8
Jul 01, 2014 | 2007 Suzuki Swift 1.3
Feb 12, 2010 | 2005 Hyundai Accent
Jul 26, 2009 | Hyundai Motor 2004 Accent
81 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: