Question about 2003 Jaguar X-Type

Open Question

Jag 2002 xtype code P1313, P1316, P1111 and p0301

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 279 Answers

SOURCE: code p1313 p1316 p1111 p0301

Odd one this to have P1111 as well.

According to my data P1111 is all dtc checks compleated, http://www.bluejag.co.uk however some websites show it as a Intake Air Temperature (IAT) Sensor Circuit Intermittent High Voltage, I'm fairly sure that the latter is incorrect.

check the basics first plugs, leads, corroded ground connections etc then its a bit of a guessing game


As for the other codes

P0301 = Misfire detected - cylinder 1
P1313 = Misfire rate catalyst damage - bank 1
P1316 = Misfire excess emission


Possible causes (as per JTIS):

Cylinder compression low
Worn camshaft / broken valve spring(s)
Fuel delivery pressure (low / high)
Fuel injector(s) restricted / leaking
Fuel injector(s) continuously open
Fuel contamination
Fuel injector circuit fault(s)
(Injector DTCs also flagged)
Spark plug failure / fouled / incorrect gap
ECM to ignition coil primary circuit fault
(Cylinder misfire detected DTC also
flagged)
Ignition coil failure

hope this helps

Posted on Mar 20, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jaguar 2002 xtype runs perfectly. Engin light is on showing codes p1111 p1316 and mis fire cylinder 1 3 5


remove the air filter housing check the wiring has not rubbed through on the metal filter holder mounting common problem.or water ingress in the engine control module/connector the plugs/on plug coils are also troublesome but 3 on the same bank is unlikely to go bad at the same time good luck

Feb 02, 2017 | 2002 Jaguar X-Type

1 Answer

How do I fix P0300,P0301,P0303, P0305,P1313,P1316& P1646?2 weeks ago,codes were minus P1313&P1316 with P0057 added in.replaced bank2 downstream sensor,P0057 gone but 2 new codes popped up????


the engine managment system on this car treats each bank as 2 seperate engines bank 1 and bank 2 the fault codes you have got are emission related. diagnosis is not easy because the ecu will use the other bank to compensate and alter its fueling etc to reduce emissions. the only way to sort it out is to put it on suitable diagnostic equipment and monitor live data ie. lambda sensors/ catalyst efficiency hope this helps

Jan 15, 2016 | 2002 Jaguar X-TYPE 2.5L

1 Answer

Parked my 05 Jag in garage for 4 months ran perfect . Just started it up got all kinds of codes Lots of miss fires PO303 PO304 P1316 Injector circuit P1316


There is every possibility that the the CPU program was corrupted by he long time the battery was not being charged . use a scanner to reset the program and then see if the fault codes persist.

Dec 07, 2014 | Cars & Trucks

1 Answer

My 2003 S-Type is misfiring when it reaches 3000 rpms. it read codes p1111, p0333,p0332,p1316,p0305,p0303,p0301,p0300.


Think you have a problem with the computer but what i have no idea to be honest ,its going into limp mode as these vehicles have a limit to the RPM you can achive on static standing .These vehicles can only be revved to 3000 rpm when stationary as this i do know from when i take this type to the test station and the sound test states 3500rpm but only 3000 can be obtained ?good job iam well known at the test station .So i would suggest that consult the dealer with the view of doing a mapping of the computer to see what the problem could be.So firstly what i would try is to disconnect the battery in the boot and join the leads together and leave overnight to discharge the memory in the computer and see if this cures the fault .

Jan 15, 2013 | 2003 Jaguar X-Type

1 Answer

2003 x-type codes help. P0037, P0300, P0305, P1111 (pend), P1316. Any help with explaining these codes will be much appreciated. Thanks


Go to http://www.bluejag.co.uk/diagnosticcodes.php to get a good description of the problems. Looks like a fault on cylinder 5 to me Ignoring P1111 which dosn't matter at the moment, could be ignition coil, plug, injector etc unless there is anything else obvious in that area. (when were your plugs last changed?)

Aug 11, 2011 | 2003 Jaguar X-Type

1 Answer

2003 x-type codes help. P0037, P0300, P0305, P1111 (pend), P1316. Any help with explaining these codes will be much appreciated. Thanks.


DTC P0037; RIGHT-HAND CATALYST MONITOR SENSOR HEATER CONTROL CIRCUIT LOW/HIGH RESISTANCE
DTC P0300; RANDOM MISFIRE DETECTED, MISFIRE DETECTED, PRIMARY CIRCUIT MALFUNCTION
DTC P0305; RANDOM MISFIRE DETECTED, MISFIRE DETECTED,
P1316 IS A MISFIRED OF A CATALYST FOR EX.SPARK PLUG,INJECTOR PRESSURE ,IN GENERAL ITS THE MISFIRED DRIVE CYCLE ...SOMETHING IS FIRING PROPERLY..LET ME ASK HOW MANY MILES DO YOU HAVE.?AND CODE P1111 IS NOTHING TO BE WORRIED ABOUT ITS THE SYSTEM READINESS TEST THAT THE CARS ECM PERFORMS WHEN YOU CUT IT OFF EACH TIME...MAKES SURE THAT ALL IS FUNCTING WELL.

Aug 11, 2011 | 2002 Jaguar X-Type

1 Answer

Code p1313 p1316 p1111 p0301 means what?


Odd one this to have P1111 as well.

According to my data P1111 is all dtc checks compleated, http://www.bluejag.co.uk however some websites show it as a Intake Air Temperature (IAT) Sensor Circuit Intermittent High Voltage, I'm fairly sure that the latter is incorrect.

check the basics first plugs, leads, corroded ground connections etc then its a bit of a guessing game


As for the other codes

P0301 = Misfire detected - cylinder 1
P1313 = Misfire rate catalyst damage - bank 1
P1316 = Misfire excess emission


Possible causes (as per JTIS):

Cylinder compression low
Worn camshaft / broken valve spring(s)
Fuel delivery pressure (low / high)
Fuel injector(s) restricted / leaking
Fuel injector(s) continuously open
Fuel contamination
Fuel injector circuit fault(s)
(Injector DTCs also flagged)
Spark plug failure / fouled / incorrect gap
ECM to ignition coil primary circuit fault
(Cylinder misfire detected DTC also
flagged)
Ignition coil failure

hope this helps

Mar 13, 2011 | 2002 Jaguar X-Type

1 Answer

Obd 2 codes P0302-P0304-P0305-P1313-P1316 and P0778 2002 Jaguar X type 3.0


THE P0302 is misfire cyclinder 2,4,and 5
The P1313 P1316 is Cyclinder compressor low, Worn camshaft/ broken valve springs. Fuel injector contamination, Spark plug failure/ incorrect gap. Iginition coil failure.
P0778 is 2/4 Brake prssure solenoid failure

HOPE THIS CAN HELP.

Apr 09, 2010 | 2002 Jaguar X-Type

2 Answers

Misfire


Well, the P in the code means powertrain.  As far as the code specifics, 
P1313 Misfire Rate Catalyst Damage Fault - Bank 1
P1316 Misfire Rate Exceeds Emissions

I would say check your spark plugs and wires.  

Mar 18, 2009 | 2004 Jaguar X-Type

Not finding what you are looking for?
2003 Jaguar X-Type Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...