Question about Cars & Trucks
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Here is the factory torque chart for all fasteners on the 2.0L
TORQUE CHART 2.0L DOHC DESCRIPTION TORQUE Camshaft Sensor Pick-Up Bolts 9.6 N·m (85 in. lbs.) Camshaft Sprocket Bolt 115 N·m (85 ft. lbs.) Connecting Rod Cap Bolts 27 N·m (20 ft. lbs.) Plus 1/4 Turn Collar - Oil Pan to Transaxle Step 1: Collar to Oil Pan Bolts 3 N·m (30 in. lbs.) Step 2: Collar to Transaxle Bolts 108 N·m (80 ft. lbs.) Step 3: Collar to Oil Pan Bolts 54 N·m (40 ft. lbs.) Crankshaft Main Bearing Cap/Bedplate M8 Bedplate Bolts 30 N·m (22 ft. lbs.) M11 Main Cap Bolts 81 N·m (60 ft. lbs.) Crankshaft Damper Bolt 142 N·m (105 ft. lbs.) Cylinder Head Bolts Refer To Cylinder Head Installation Cylinder Head Cover Bolts 12 N·m (105 in. lbs.) Drive Plate to Crankshaft Bolts 95 N·m (70 ft. lbs.) Engine Mount Bracket Bolts 61 N·m (45 ft. lbs.) Exhaust Manifold to Cylinder Head Bolts 23 N·m (200 in. lbs.) Exhaust Manifold Heat Shield Bolts 15 N·m (130 in. lbs.) Intake Manifold Bolts 28 N·m (250 in. lbs.) Oil Filter Adapter Fastener 80 N·m (60 ft. lbs.) Oil Filter 20 N·m (15 ft. lbs.) Oil Pan Bolts 12 N·m (105 in. lbs.) Drain Plug 34 N·m (25 ft. lbs.) Oil Pump Attaching Bolts 28 N·m (250 in. lbs.) Oil Pump Cover Fastener 12 N·m (105 in. lbs.) Oil Pump Pick-up Tube Bolt 28 N·m (250 in. lbs.) Oil Pump Relief Valve Cap 55 N·m (40 ft. lbs.) Spark Plugs Plug 28 N·m (20 ft. lbs.) Thermostat Housing Bolts 23 N·m (200 in lbs.) Timing Belt Tensioner Assembly - Mechanical Bolts 28 N·m (250 in. lbs.) Timing Belt Tensioner Assembly - Hydraulic Bolts 31 N·m (275 in. lbs.) Timing Belt T
Posted on Jun 11, 2009
on each headlamp assembly, there will be either one or two plastic nuts that you can turn.
If you only have one nut on each, that will adjust the vertical aim of the headlights.
If you have two nuts on each, one will adjust the vertical and the other will adjust the horizontal.
Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)
If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.
Posted on Sep 11, 2009
Tips for a great answer:
Oct 27, 2014 | 2002 Volvo S60
Jul 21, 2014 | 2004 Volvo S60
Jan 17, 2014 | 2002 Volvo S60
Aug 14, 2011 | 2001 Ford Ranger Regular Cab
Mar 01, 2018 | 2006 Volvo S60
Mar 21, 2010 | Mazda Protege Cars & Trucks
May 28, 2009 | 2002 Volvo S60
Jan 11, 2009 | 2004 Volvo S60
84 people viewed this question
Usually answered in minutes!