Question about 1992 Ford Crown Victoria

Open Question

Location of EGR valve for 180-hp, 5.7-liter V-8 (regular gas) engine? how do you remove the EGR valve?

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 45 Answers

SOURCE: Need location diagram of PCV valve location

believe it is located on passenger side valve cover half way back. if i'm mistaken you could go to autoparts store and check a haynes manual

Posted on Dec 27, 2008

c17hydro
  • 2984 Answers

SOURCE: location of EGR valve for 4.6 liter engine

a887903.gif
EGR VALVE IS #2.

Please wait for second post to answer your second question....comes with a few pictures.

Posted on Nov 16, 2009

Testimonial: "thanks c17hydro ...looks like the proper proceedure,,,will try fix tomorrow"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 silverado EGR location on a 5.3 fuel injected v8


Doesn't have a EGR valve ! Has Camshaft Actuator System .
Camshaft Actuator System Description
The camshaft position (CMP) actuator system is used for a variety of engine performance enhancements. These enhancements include lower emission output through exhaust gas recirculation (EGR) control, a wider engine torque range, improved gas mileage, and improved engine idle stability. The CMP actuator system accomplishes this by controlling the amount of intake and exhaust valve overlap. For the 6.0 liter (LY6, L76) and the 6.2 liter (L92) engine, the Park position for the CMP actuator and camshaft is 8.5 degrees before top dead center (BTDC) or 17 crankshaft degrees BTDC. The engine control module (ECM) can only command the CMP actuator to retard the valve timing from the Park position or advance the valve timing back to the Park position. The total range of valve timing authority is 31 degrees camshaft rotation, or 62 degrees of crankshaft rotation. The control range is from the Park position of 8.5 degrees camshaft or 17 degrees crankshaft BTDC, to 22.5 degrees camshaft or 45 degrees crankshaft after top dead center (ATDC).

May 31, 2017 | Cars & Trucks

1 Answer

Location of egr valve on 2003 chevy silverado


Hi there:
Here is a picture showing the EGR valve on the 4.8 Litre V8. The numbers below go with the picture. The arrow points to the front of the truck.

(1) Fuel Injector 2 Connector
(2) Throttle Actuator Control (TAC) Motor Connector
(3) Throttle Actuator Control (TAC) Motor
(4) Exhaust Gas Recirculation (EGR) Valve Connector
(5) Exhaust Gas Recirculation (EGR) Valve
(6) Fuel Injector 6
(7) Ignition Coil 2


9_14_2012_3_34_36_am.jpg
Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Sep 14, 2012 | 1989 Chevrolet Camaro

1 Answer

Auto part store says there is no egr valve on 08 dodge ram 1500 4.7. True?


25 - Emissions Control/Exhaust Gas Recirculation, Gas/VALVE, Exhaust Gas Recirculation (EGR), 4.7L/Removal REMOVAL collapse.gif Labor Operations: Click to display a list of Labor Operations associated with this procedure

2431021.jpg The electronic EGR valve and solenoid assembly is attached to the rear of the left cylinder head. An exhaust gas routing tube connects the EGR valve to the intake manifold.
1. Use a diagnostic scan tool to record any Diagnostic Trouble Codes (DTC). 2. Remove the throttle body resonator. 3. Perform the fuel system pressure release procedure (Refer to 14 - Fuel System/Fuel Delivery - Standard Procedure) 4. Disconnect and isolate the negative battery cable.


2430847.jpg 5. Disconnect the power brake booster vacuum hose (1) and the vapor canister purge hose (2) at the intake manifold.


2430720.jpg 6. Disconnect the EGR valve solenoid electrical connector (1).


2430801.jpg 7. Remove the EGR valve assembly retaining bolts (1). 8. Remove the EGR valve and the EGR routing tube from the engine as an assembly. 9. Remove and discard the metal gasket located between the cylinder head and the EGR valve assembly.


2433378.jpg 10. Remove the EGR valve routing tube retaining bolts (1) at the EGR valve assembly 11. Remove the EGR valve routing tube and discard the gasket.

Feb 14, 2012 | 2008 Dodge Ram 1500 2WD

2 Answers

Need to find and replace the DPFE-15 sensor. Dealership diagnosed when service engine light came on and saaid this is what needed replacing. Problem is I do not know where to find it on the engine.


Exhaust Gas Recirculation (EGR) System The exhaust gas recirculation (EGR) system is designed to:
  • reintroduce exhaust gas into the combustion cycle.
  • lower combustion temperatures.
  • reduce the formation of oxides or nitrogen (NOX).
The amount of exhaust gas reintroduced and the timing of the cycle varies by calibration. Timing and volume are controlled by the following:
  • engine rpm
  • engine vacuum
  • exhaust system back pressure
  • engine coolant temperature
  • air charge temperature
  • throttle position
The EGR valve (EGR valve) (9D475) is vacuum-actuated. The vacuum hose routing diagram is shown on the Vehicle Emission Control Information (VECI) decal. The EGR system is a differential pressure feedback EGR Sensor system. Differential pressure feedback EGR Sensor is a subsonic closed loop EGR system. The differential pressure feedback EGR system:
  • monitors EGR flow rate by the pressure drop across the metering orifice located in the EGR tube.
  • uses a differential pressure feedback EGR sensor as the feedback device.
  • uses the EGR valve only as a pressure regulator, rather than a flow metering device.
  • controlled pressure is varied by the valve movement using vacuum output of the EGR vacuum regulator solenoid (9J459).
  • allows for a more accurate assessment of EGR flow requirements.


Differential Pressure Feedback EGR Flow Diagram


aa3104a.gif

Differential Pressure Feedback EGR Sensor Removal
  1. Disconnect engine control sensor wiring (12A581) from Differential Pressure Feedback EGR Sensor.
  1. Disconnect Differential Pressure Feedback EGR Sensor hoses from EGR valve to exhaust manifold tube (9D477).
  1. Remove retaining nuts or bolts (depending upon application) and EGR Differential Pressure Feedback transducer.
Installation
  1. Follow removal procedure in reverse order.
  1. Tighten retaining nuts or bolts (depending upon application) to 5-7 Nm (45-61 lb-in).


    Differential Pressure Feedback EGR Sensor, 3.0L (2V) Engine


    aa0036a.gif



    Differential Pressure Feedback EGR Sensor, 3.0L (4V) Engine


    a23840a.gif


    Item Part Number Description 1 6049 RH Cylinder Head 2 - Differential Pressure Feedback EGR Sensor 3 - Nut (2 Req'd) 4 - Stud Bolt 5 - Bolt (2 Req'd) 6 - Differential Pressure Feedback EGR Sensor Bracket A - Tighten to 5-7 Nm (45-61 Lb-In) B - Tighten to 8-12 Nm (71-106 Lb-In)

    Engine Emission Control Component Location-3.4L SHO Engine


    a25013a.gif


    Item Part Number Description 1 95607-05200 Nut 2 - EGR Sensor Hose 3 - EGR Sensor Hose 4 95027-08016 Bolt 5 - Differential Pressure Feedback EGR Sensor 6 9J433 Differential Pressure Feedback EGR Sensor Mounting Bracket 7 9D474 EGR Solenoid Vacuum Valve (2 Req'd) 8 A4670 Vacuum Tube Assembly 9 9424 Intake Manifold 10 9J459 EGR Vacuum Regulator Solenoid A - Tighten to 5-7 Nm (45-61 Lb-In)
Hope this helps

Aug 14, 2011 | 1999 Ford Taurus

3 Answers

What type of fuel recomended for 2006 gmc envoy


Fortunately the way they refine fuel these days and the way they engineer these cars and engines, the lowest grade is sufficient and will not cause any damage to the engine or void any warranties. So in short, 87 octane is just fine.

Jul 22, 2010 | 2006 GMC Envoy

3 Answers

Location of EGR valve for 4.6 liter engine? how do you remove the EGR valve?


a887903.gif
EGR VALVE IS #2.

Please wait for second post to answer your second question....comes with a few pictures.

Nov 16, 2009 | 1992 Ford Crown Victoria

1 Answer

Check engine light on when check it insufficent EGR valve


yes the passages can be cleaned. They pass exhaust gas into the intake maniflod for reburning.

It could be the DPFE that controls the EGR too. Diff. Pressure Feedback EGR.

there is also a vacuum regulator valve and a solenoid too.

Please rate as fixya if this helps.

----------------
Exhaust Gas Recirculation (EGR) Valve —3.0L (2V) Removal and Installation
  1. Disconnect the exhaust gas recirculation (EGR) valve (9D475).
    1. Disconnect the vacuum line.
    1. Disconnect EGR tube nut.
  1. Remove the EGR valve.
    • Remove the two bolts.
    • Remove and discard the gasket.
  1. NOTE: The sealing surfaces are soft metal.
    To install, reverse the removal procedure.
    • Carefully clean both sealing surfaces and install a new EGR valve gasket.
2d0d879.gif
--------------------------------------
EGR Valve —3.0L (4V) Removal and Installation
  1. Remove the EGR valve (9D475).
    1. Disconnect the vacuum line.
    1. Disconnect the EGR tube.
    1. Remove the EGR valve and discard the gaskets.
e56a6e2.gif
  1. NOTE: The EGR valve sealing surfaces are soft metal.
    To install, reverse the removal procedure.
    • Carefully clean all sealing surfaces and install new EGR valve gaskets.

Apr 07, 2009 | 2000 Mercury Sable

1 Answer

Location of EGR Valve


Found the info!!

This Dodge EGR valve is a certain kind of device that is mounted right on your intake manifold which controls the amount of exhaust gasses back into your engine.
On a 2005 Dakota with 4.7 liter engine (non-HO), the EGR valve is located near the intake manifold on the driver's side right up against the firewall. It's hard to spot as it sits lower than the intake manifold. To change it, remove the electrical connector. There's a red tab that needs to be pushed to one side and then you have to squeeze down on a tab to get it free. Using a 13 mm socket, remove the bolt that you can see. I had to use a 3 inch wobble extention and then a 8 inch extension with a deep well socket to reach it with my 3/8 inch ratchet. There's a second bolt that you can't see between the EGR valve and the firewall. With a little trial and error and a lot more luck, you can reach the hidden bolt with the 3 inch wobble extension and a 13 mm deep well socket. Attach the ratchet after the socket is on and remove. This one isn't easy and if there's any Dodge engineers reading this one, a couple of extra inches of clearance between the valve and the firewall wouldn't have killed you no matter what the cost accountants said. With both bolts removed, you should be able to pull out the metal pipe that connects the manifold to the EGR valve out of the manifold (Pull to the right) and then you can lift the valve out. For assembly, the metal pipe connecting the intake manifold the EGR valve has to be removed and reinstalled on the new valve. It's held on with 2 5/16th" bolts. You should put the rear bolt on tight, but leave the front bold loose for the reinstall as some adjustment is necessary to get it put back together and the rear is a pain to tighten when installed. Line up the bolts that attach the valve and get the rear 13 mm bolt (The one you couldn't see on disassembly) started. Do not start the other 13 mm bolt as you'll need to pivot the valve and pipe to the left in order to reinsert the pipe into the intake manifold. Once the pipe is in the intake manifold. Start the other 13 mm bolt and tighten both 13 mm bolts and then the 5/16" bolts holding the pipe onto the valve. Reinstall the electrical connection. Please don't forget to rate!!!!

Mar 14, 2009 | 2005 Dodge Dakota

2 Answers

2005 Dodge 1500 code p0404 EGR valve.


The electronic EGR valve and solenoid assembly is attached to the rear of the left cylinder head ,

  1. Remove electrical connector (5) at top of EGR valve solenoid.
  2. Remove tube mounting bolt (1) at intake manifold.
  1. Remove two bolts (4) connecting EGR tube (1) to valve assembly.
  2. Remove gasket located between EGR tube flange and EGR valve assembly.
  3. Remove two EGR valve mounting bolts (5).
  4. Separate valve assembly (3) from engine.
  5. Remove and discard metal gasket located between cylinder head and valve assembly.
INSTALLATION
  1. Clean area at rear of left cylinder head where it joins base of EGR valve.
  2. Clean EGR tube where it joins EGR valve.
  3. Position new gasket between EGR valve and cylinder head.
  4. Position EGR valve to cylinder head. Install and tighten two bolts (5). Refer to Torque Specifications.
  5. Position new gasket between EGR tube flange and EGR valve assembly.
  6. Position EGR tube (1) to side of EGR valve and into intake manifold.
    1. Install EGR tube flange bolt (1) at intake manifold. Tighten bolt. Refer to Torque Specifications.
    2. Connect electrical connector (5) to top of EGR valve solenoid (2).Do a final tightening of two EGR tube bolts (4). Refer to Torque Specifications

Feb 05, 2009 | 2005 Dodge Ram 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...