Question about 1999 Ford Escort

Open Question

Head bolt pattern for ford Taurus 3.0 - 1999 Ford Escort

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 14036 Answers

SOURCE: what are the torque specs for head bolts on a

YOU HAVE TO MAKE 2 PASS. ON FIRST PASS TORQUE HEAD BOLTS TO 37 TO 50 FT LBS. ON SECOND PASS TORQUE 62 - 68 FT LBS.

Posted on Sep 07, 2009

billandrade
  • 6 Answers

SOURCE: will wheels from 1989 Ford F-250 4x4 bolt on to

Hello,
Sorry the 1989 F250 4wd wheels are not interchangeable with the 2000 F250 4WD.. The hubs where changed to a new design and (Bolt Pattern: 8 x 170MM) From 1999 to present...

Bill Andrade

Posted on Sep 22, 2009

tburtk
  • 158 Answers

SOURCE: torque on 3.0 ford taurus head bolts

40 ftlbs then 73 ftlbs then recheck at 73 ftlbs

Posted on Feb 06, 2010

wfservices
  • 260 Answers

SOURCE: Whats the bolt pattern for

1.8 liter..NOTE: Lubricate the cylinder head bolts using the specified engine oil.

Install the cylinder head bolts. Tighten the cylinder head bolts in 2 or 3 steps in the sequence shown to 76-81 Nm (56-60 lb-ft).

b064be7.gif
1.9 liter
Apply a light coating of engine oil to the threads of the new cylinder head bolts. Install the new cylinder head bolts to the cylinder head. Following the sequence shown below, tighten the cylinder head bolts to 40-60 Nm (30-44 lb-ft). Loosen all cylinder head bolts approximately two turns, then retighten the cylinder head bolts to 60 Nm (44 lb-ft) following the sequence shown. After tightening, turn all bolts 90 degrees, in the same sequence. Complete bolt tightening by turning them an additional 90 degrees, in the same sequence. 398246b.gif

Posted on Aug 21, 2010

  • 161 Answers

SOURCE: TORQUED HEAD BOLTS TO 60LBS

inch pounds for startersget manual procedure is 6 6 step two step tighten lossen tighten long an short then loose n one at a time an retorque..need proceedure in front of you dealer or part store may copy or print off for you...

Posted on Mar 20, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need the head bolt torque specs and sequence for a 2000 frd Taurus with a v6 3.0L flex fuel engine


Go to autozones website and make a free account, Log in and put in your make, model and year. Then look for free repair guides

Dec 11, 2014 | 2000 Ford Taurus

1 Answer

Torque specification for 1995 ford Taurus


4 Cyl Intake manifold bolts to heads = 15 to 23 Ft-lbs
6 Cyl 3.0L Step 1 = 11, step 2 = 21
6 Cyl 3.8L Step 1 = 7, step 2 = 15 & step 3 = 24 Ft-lbs
Tighten the bolts in secuence from center to out, alternating sides (front & rear); reaching the specified torque in several stages. I hope this helps. Take care.

May 25, 2014 | 1995 Ford Taurus

1 Answer

TORQUED HEAD BOLTS TO 60LBS AND SNAPED HEAD BOLT IN HEAD. PLEASE GIVE ME TORQUE SPECS ON FORD 3.Ol 1999 tAURUS....mANUFACTURE DATE 5/99


inch pounds for startersget manual procedure is 6 6 step two step tighten lossen tighten long an short then loose n one at a time an retorque..need proceedure in front of you dealer or part store may copy or print off for you...

Mar 19, 2011 | Ford Taurus Cars & Trucks

1 Answer

Whats the bolt pattern for my 1995 ford escort head?


1.8 liter..NOTE: Lubricate the cylinder head bolts using the specified engine oil.

Install the cylinder head bolts. Tighten the cylinder head bolts in 2 or 3 steps in the sequence shown to 76-81 Nm (56-60 lb-ft).

b064be7.gif
1.9 liter
Apply a light coating of engine oil to the threads of the new cylinder head bolts. Install the new cylinder head bolts to the cylinder head. Following the sequence shown below, tighten the cylinder head bolts to 40-60 Nm (30-44 lb-ft). Loosen all cylinder head bolts approximately two turns, then retighten the cylinder head bolts to 60 Nm (44 lb-ft) following the sequence shown. After tightening, turn all bolts 90 degrees, in the same sequence. Complete bolt tightening by turning them an additional 90 degrees, in the same sequence. 398246b.gif

Aug 21, 2010 | 1995 Ford Escort

1 Answer

Pattern to torque heads on 460 mortor and how many lbs


The pattern to torque almost any cylinder head is start at the center two bolts and move outward example: 10 6 2 3 7
9 5 1 4 8

Apr 04, 2010 | 1995 Ford F250

1 Answer

Torque on 3.0 ford taurus head bolts


40 ftlbs then 73 ftlbs then recheck at 73 ftlbs

Feb 06, 2010 | 1999 Ford Taurus

1 Answer

What is the bolt torque settings for an intake manifold on a 1973 Ford Mustang Mach 1 with a 351C and 2-barrel heads? Also, Where can I find a diagram showing the sequence or pattern for placing the intake...


Intake Manifold 5/16 Bolts Non-Hardening sealers 25 ft-lbs
Cast Iron Heads 3/8 Bolts 30 ft-lbs

The torque sequence is snug all down then just star left rear then right front then right rear then left front and so on

Nov 27, 2009 | Ford Mustang Cars & Trucks

1 Answer

Tire bolt size


I believe that is a 5x4.5 in pattern. To be sure take a tape measure and measure from the edge of one lug to the center of one of the opposite lugs. the bolt pattern is then in the format of (number of lugs x measurement between them) so in your case it will be a 5x(measurement)

Oct 27, 2009 | 2001 Ford Taurus

1 Answer

Anyone know what the torque for the head bolts on a 1991 ford taurus with the 3.8L engine, need to replace it, but i have no idea what the torque is....please help


Torque sequence:
------------
6 4 2 8

5 1 3 7
------------
Step 1: Torque from 47-53 Nm (35 to 39 Ft/Lbs)
Step 2: Back off all bolts 360
Step 3: Torque from 27 -33NM (20 to 24 Ft/Lbs)
Step 4: Torque rotate 85-95
Step 5: Torque rotate additional 85-95

Jun 15, 2009 | 1991 Ford Taurus

Not finding what you are looking for?
1999 Ford Escort Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...