Question about 2000 Chevrolet Prizm

1 Answer

My tail lights and dash board lights do not work. Fuse was out so I changed it but it went out as soon I as I turned the lights on. What should I do?

Posted by on

  • Sergej Pucar
    Sergej Pucar Oct 18, 2013

    Fuse in inside the car, under the steering wheel. Should I check the connection to that fuse box ?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,113 Answers

Perhaps when a fusible link melted it crossed some wires and blew an unrelated fuse. Cut open the wrapping on the bundle of wires under the hood coming from the firewall and see if anything is melted. If so look for the fusible link and replace.

Posted on Oct 18, 2013

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Tail lights don't work on 1998 Chevy Silverado.

check the wiring from the tailights back to the fuse panel, it sounds like an open connection. if i recall correctly check under the dash on the drivers side near the fuse panel for a bunch of wires in a bundle and look carefully for a wire or two that are cut/shorted/or seperated, you can also check under the drivers side kick panel by the hood release.

Posted on Feb 17, 2009

  • 1 Answer

SOURCE: tail lights and instrument panel lights dont work

The Dash and Tail lights connect to the same fuse in most cars. if the fuse is okay, check to make sure the tail lights and/or dash lights are properly grounded. all bulbs could be blown...but highly unlikely.

Posted on Feb 21, 2009

webbird69
  • 6 Answers

SOURCE: No tail lights on 1991 Chevy Silverado. fuse is good

sounds like a broken wire in the harness. look around the bumper area,sometimes along the frame. may have to peel back some tape covering. also if you have a trailer harness look closely at those.

Posted on Jun 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Grand Am Pontica - the dash board lights went out recently and then the horn. Took to a shop they just swapped two fused in the engine seciton, and horn works, but no dashboard lights and I just...


check the parking light fuse or taillight fuse to make sure it has not blown. replace it if it has blown and see if the lights work or if the fuse blows again. if it blows when you turn the lights on then you have a short circuit that needs repaired. if the fuses are good ,then most likely the headlight switch is bad not allowing the taillights or dash lights to work.

Aug 17, 2011 | Pontiac Grand Am Cars & Trucks

2 Answers

DASH LIGHTS AND TAILLIGHTS NOT WORKING


There seems to be a unwritten rule that the tail lights are on the same wire as the dash board lights ... if you have no dash board lights, neither do you have tail lights. There is a blown fuse somewhere, your job is to find the wire causing the trouble and it is likely at a most inconvenient place near a hinge.

Good luck with your repair.

May 03, 2010 | 1983 Oldsmobile Cutlass Supreme

1 Answer

I have a 2000 Dodge Durango I bought about 4 hours ago. The tail lights do not work but the brake light and turn signals do. Also the dash lights do not work. The dash lights came on when I hit the...


The odds are the one fuse is blown for the dash and the tail lights. And the wrong bulb may have been put in for the brake light. The brake light is feeding back into the tail light circuit causing the fuse to blown out.

Change out the bulbs with OEM bulbs and replace the blown fuse. That should fix the problem.

Apr 16, 2010 | 2000 Dodge Durango

3 Answers

96 dodge ram 2500 tail lights and instrument panel lights quit working at the same time all other lights work help please!!!


Check your tail light fuse, on the dodge ram the dash lights and tail lights use the same fuse so if the tail light fuse blows your dash lights will go out to alert you of no tail lights.

Jul 20, 2009 | Dodge Ram 2500 Cars & Trucks

1 Answer

1994 honda accord. meter/and tail lights


Did you see the Small Black Squares inside the Fuse Relay Box under the Hood? These are Relays. There should be a Relay that says "Illumination" OR "Lights" around this area. Change this Relay and it should be ok. They just Cost a Couple of Bucks. Please Rate my Response, I need all the Help that I can get ! Thanks!

Jan 26, 2009 | 1999 Honda Accord

1 Answer

1994 accord, dash and tail lights wont work


chk. headlight switch, my guess thats what it is.

Jan 25, 2009 | 1999 Honda Accord

1 Answer

Tail Light Does Not Work, but brake lights do


check the fuse if not it then check the dash board u hav fuse in there , if that not it then u need a new dash

Jul 04, 2008 | 1994 Ford Tempo

Not finding what you are looking for?
2000 Chevrolet Prizm Logo

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...