Question about Cars & Trucks

1 Answer

Free Online Manuals

Had to change the needle, now won't go? checked threads they are as shown. The loop is not catching on bottom lower needles.

Posted by on

Ad

1 Answer

What we talking about here

Posted on Oct 18, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
jmgldsmth
  • 1869 Answers

SOURCE: Need Online Auto Service Manuals Pontiac 2.0

ebaymotors.com

Posted on May 01, 2009

  • 3600 Answers

SOURCE: Car manuals.

Yes it would be close enough, for service intervals and if it was for a vehicle that was equipped with same features. It is difficult to get them free, as they are copy writted

Posted on Aug 03, 2009

  • 236 Answers

SOURCE: changed alternator, now fuel gage needle is stuck

this happened because an electriacl surge. two ways to fix this.
1. remove the instrument cluster, then remove the clear lense, once the lense is removed you can use you finger to gently rotate the needles back into proper position. this sometimes works, if not
2. you'll need to send the instrument cluster in your local General Motors dealership and have them get a "advance exchange" instrument cluster. this is very expensive and you won't be able to drive the car until the cluster is back in the car.
I hope this helps.

Posted on Nov 05, 2009

dnewcombe1
  • 1564 Answers

SOURCE: check gages light turns on and doesn't go off.

At this point I would strongly suggest that you have your mechanic hook a mechanical oil pressure guage to the engine and make absolutlely sure that the pressure is up to manufacturers standards. It may simply be a failing oil pressure sending unit, but, until you know, it could turn out a lot more expensive! Thank you, Dana

Posted on Jan 06, 2010

Z71guy
  • 154 Answers

SOURCE: bad speedometer needle will reset lower and lower

Pretty common problem with these. Here's a guide to learn how to fix GM instrument clusters yourself, I used it to fix mine and it worked great.How to guide for Uplander instrument cluster repair

Posted on Oct 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What's your question?how do I put tread inside d bobbing to make it saw normal


take the bobbin out of the bobbin holder, load up the bobbin fully
place the bobbin in the holder and pull the thread around the edge of the holder until the thread hits a slot and goes down under a flat spring plate
leave about 6" free thread and put the holder back into the machine
tun the machine over by hand and the top thread will pick up the bobbin thread
pull the bobbin thread up and place both top and bottom threads out the back of the foot
leave about 8" as when the needle moves down the top thread will be pulled out of the needle if it is too short

Mar 13, 2016 | Cars & Trucks

1 Answer

Won,t shift out of park, no brake light , new bulbs , new brake light switch , all fuses are good ,no current at brake switch


Its hard to get any car repair info for free on the net, everyone wants to make you pay for it. One place where you can still get this info for free and in many cases get free access to online care repair manuals etc., is your local library! Check them out! They should have the Haynes or Chilton's service manuals for most cars and/or access to the online services for Chilton's/Haynes etc.

Aug 06, 2014 | 1993 Lincoln Town Car

2 Answers

I have a 83 mustang gt 302 a Holley 600 it's


For those like me with a good old fashioned Holley type carb, here's a real nice video on the basics. He's gonna be doing more in-depth videos in the future. This cat flat out knows carbs!

Apr 17, 2013 | Cars & Trucks

1 Answer

Have a 2002 Cadi deville, replaced the speedometer sensor because the needle was jumping. Now the speedometer won't work at all.


sounds like your in the area could be a bad sensor or a bad wire that your moving around when changing the sensor

Jul 20, 2012 | Cars & Trucks

1 Answer

Mazda truck window won't go down


You will need to replace the motor, it is defective.

May 22, 2012 | Mazda B-Series Truck Cars & Trucks

1 Answer

My son put a bobby pin in my ignition with the loop in and the prongs out, i can wiggle it but it won't come out plz help


small needle nose pliers from a car parts store, hemostats (roach clip) taken from a pothead or hospital. jewelers' screwdriver pressed in behind it. large magnet to pull it whilst you jiggle it.

Aug 29, 2011 | 2000 Dodge Grand Caravan

1 Answer

Fuel and temp gauge needles are under the pins after being serviced


previous owner had drilled a 1/16 size hole on the clear plastic directly in front and align with the gas needle at the area where the needle located ( usually below the empty post). use a paper clip the size of the drilled hole, bend one end slightly so it will catch the needle and drag it over the post. i did this couple times already. Do not overfill your gas tank (top-off), which will cause this needle to bounce off and go under neath the empty post. i hope this will help

Jul 07, 2011 | 1998 Buick Park Avenue

2 Answers

The needles on the battery gage will not go back


you have a short running into your cluster wiring

Feb 25, 2010 | 2003 GMC Envoy

1 Answer

Heat needle is going to hot ten minutes into driving


check the bottom hose u may be leakening radiator flued and also check around the water pump if u see water then u need to change the water pump and if you see a leake at the bottom then change the hose.

Jul 09, 2008 | 2001 Kia Sephia

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...