Question about 2011 GMC Terrain

Open Question

Change the third brake light at top of hatch on 2010 Terrain

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a 2010 GMC Terrain 4 cylinder the motor light cams on what can i do to get the light go off


run the fault codes to find what is putting the light on and fix it
the light also covers the transmission faults

Nov 06, 2016 | 2010 GMC Terrain

1 Answer

No brake lights


If the bulbs are good, it could be the brake light switch, or the turn signal switch. The third brake light bypasses the turn signal switch.

Mar 09, 2014 | 1999 Chevrolet Tahoe

2 Answers

Third brake light on '01 Jeep Grand Cherokee not working.


check the light socket it could be lose on the wires or just the light

Jul 12, 2012 | 2001 Jeep Grand Cherokee

2 Answers

2007 dodge caliber brake lights dont work, bulbs are good, hatch back brake light works any ideas what this could be. derek


Check the connections on the "body harness" that is located near the hinge for the decklid.this harness,if i remember correctly,is on the driver-side of the car.Also check to make that no wire has any "bare spots"that are grounding to any metal.

Feb 12, 2011 | Dodge Caliber Cars & Trucks

1 Answer

How to replace the rear hatch brake light on a 2001 dodge grand caravan


If you are referring to the Third Brake Light mounted at the top of the rear hatch, then there should be 2 screws on either side of the lense. Remove those two screws and pull the lense off. You can now twist the bulb socket counter-clockwise and remove it from the lense.

Jan 21, 2011 | 2001 Dodge Grand Caravan

1 Answer

How to replace the third brake light (hatch) on a 2005 hyundai accent. I took off the 4 screw on the the plastic cover and it still won't come off. Tried taking off cove of back hatch but don't want to...


Above the third brake light is a small panel, remove this panel using small screwdriver.
1. You'll see four (4) bolts, remove the three bolts that are painted black, do not remove the center bolt holding the plastic molding, this is for the door molding, and has nothing to do with the light.
2. Once those three bolts are out, you'll see two more small screws, remove them and you'll have access to the third brake light bulb.

Be careful when pulling out the bulb, my bulb broke, and I'm still trying to get pieces out! - Good luck.

Jan 16, 2011 | 2005 Hyundai Accent

1 Answer

Parking lights work, but no brake lights at all.


Test the brake light switch by the brake pedal for electrical power and operation with a 12 V test light

Apr 04, 2009 | 1993 Jeep Grand Cherokee

1 Answer

Lower brake lights dont work,third light does


Turn signal switch 95% of t he time. Try to work your hazards, if it stuck at all will also cause this.

Feb 10, 2009 | 1998 Chevrolet Blazer

1 Answer

Need 02 trailblazer third brake light removal


Open the full hatch.
Pull down the weather strip near the rear dome light.
There should be a wire with a connector in it. Disconnect it
Close the full hatch.

Open just the window hatch. There is 1 screw on either side of the bulb housing.

Jan 20, 2009 | 2002 Chevrolet TrailBlazer

Not finding what you are looking for?
2011 GMC Terrain Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...