Question about Cars & Trucks

Open Question

My tire is slanted inward on my 2008 charger.

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Strattrpt
  • 159 Answers

SOURCE: my front tires are slanting

First, are they slanting inwards at the top, or towards the front?
If your tires are slanting inwards like you are turning the car (the front is facing in more than the back when they should be facing straight forwards ... like it's pigeon-toed) then you have an alignment problem. For this you will have to go to a mechanic who can do alignments and they will straighten it out.
If the tire is slanting inwards towards the top of the tire, there are a few issues that could be the cause ...
1. Jack up your SUV so one of the front tires leaves the ground. Grab the tire and push on the top and then the bottom of the tire (above and below the rim). If the tire moves when you push on it, the tie rods or tie rod ends are probably shot. This is a piece of the steering system, and tends to be one of those parts that every car eventually has problems with. If you do not work on your own vehicle very often I recommend taking it to a mechanic to have these replaced since the steering system is so vital to your safety while driving. If you DO most of the work on your own car, and have a lot of experience with it, you should be able to pick up tie rod ends at any auto parts store. While you are there, I recommend getting a Haynes manual for your vehicle -- it will have exact directions on how to change out the tie rod ends, with pictures and all that goodness. If you ever have future problems with the car that you want to fix, this manual will almost always help you get it fixed.
2. If your tire does not move when you check the tie-rod ends, but the tire is still slanted inwards, take a look at your springs and shocks or struts. If the springs are broken or fully compressed when the car is sitting on the ground, then you have to get the suspension pieces repaired. This I HIGHLY recommend taking to a mechanic, even if you DO know what you are doing most of the time. The springs would need to be compressed using a special tool, and if the procedure is done wrong, the springs can shoot off of the compressors and either kill you or cause MAJOR damage to your stuff -- a friend of mine almost died when one of his spring compressors broke ... the spring ended up bouncing around his garage for about 20 minutes, destroying everything it hit, while he hid under the car. Fortunately he survived with no injury, but his garage and car were both totally destroyed in the process).
3. If the springs are not fully compressed while the Bronco is sitting on a flat surface, then it might be the shocks / struts. The only difference between a chock and a strut is that one is in the center of the spring, the other is located right next to it. Make sure that the rubber pieces on your shock/strut are in good condition, and that there is no fluid leakage. If these are broken, I recommend taking your bronco to a mechanic, because as above, these are very dangerous parts to replace if you don't know exactly what you are doing.
The only other issue that I can think of off the top of my head that would cause your tires to slant inwards is loose lug nuts ... but if it is happening on both front tires this is VERY unlikely. Make sure all of your lug nuts are tight or your tires might fall off while driving.
If you have recently swapped out the engine in your bronco for something much bigger, then you might have put more weight on the front suspension that needs to be accounted for ... and none of the above solutions will fix it. For this, you need to upgrade your front suspension to account for the extra weight -- this would require a specialty store, and after-market parts (like a lift kit).
There is also a VERY small chance that you have 2 bent axles ... but if both front tires are slanting in at about the same angle, 99.999% chance that this is not your problem. If it is just one tire that has this problem, then you will probably notice a strange bounce while driving, and this is a more likely scenario ... but I really don't think it's that.
If none of these solutions work ... please put a bit more info about your issue and I will see if I can help some more. If you were able to include a picture of the vehicle that shows how the tires look, that would be a great help. Best of luck .. and be safe if you do the work yourself.

Posted on May 24, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuse located for the radio of 2008 dodge charger


Radil fuse shoul be in the REAR power distribution fuse block located in trunk under spare tire carpeted panel. The black cover on top of fuse panel should have the fuse listed.

Apr 22, 2014 | 2008 Dodge Charger

1 Answer

What is the problem when the rear tires on a 96 dodge avenger are slanted inward


Inward at the top?? Need's rear struts. Jack up one side, grab the tire, try to wiggle in a back & forth motion. If it is solid then it's not the wheel bearings.

Nov 04, 2012 | Cars & Trucks

1 Answer

Hit pothole and now tire makes clicking noise and tire slants inward


If you feel that you've hit the hole that hard, you should have the wheel and suspension checked by a professional. The strut or control arm may be bent and in need of replacement, but that's only if you've really hammered it.

May 21, 2012 | 1992 Saturn SL1

4 Answers

My front tires are slanting inward and idk how to fix that.


First, are they slanting inwards at the top, or towards the front?
If your tires are slanting inwards like you are turning the car (the front is facing in more than the back when they should be facing straight forwards ... like it's pigeon-toed) then you have an alignment problem. For this you will have to go to a mechanic who can do alignments and they will straighten it out.
If the tire is slanting inwards towards the top of the tire, there are a few issues that could be the cause ...
1. Jack up your SUV so one of the front tires leaves the ground. Grab the tire and push on the top and then the bottom of the tire (above and below the rim). If the tire moves when you push on it, the tie rods or tie rod ends are probably shot. This is a piece of the steering system, and tends to be one of those parts that every car eventually has problems with. If you do not work on your own vehicle very often I recommend taking it to a mechanic to have these replaced since the steering system is so vital to your safety while driving. If you DO most of the work on your own car, and have a lot of experience with it, you should be able to pick up tie rod ends at any auto parts store. While you are there, I recommend getting a Haynes manual for your vehicle -- it will have exact directions on how to change out the tie rod ends, with pictures and all that goodness. If you ever have future problems with the car that you want to fix, this manual will almost always help you get it fixed.
2. If your tire does not move when you check the tie-rod ends, but the tire is still slanted inwards, take a look at your springs and shocks or struts. If the springs are broken or fully compressed when the car is sitting on the ground, then you have to get the suspension pieces repaired. This I HIGHLY recommend taking to a mechanic, even if you DO know what you are doing most of the time. The springs would need to be compressed using a special tool, and if the procedure is done wrong, the springs can shoot off of the compressors and either kill you or cause MAJOR damage to your stuff -- a friend of mine almost died when one of his spring compressors broke ... the spring ended up bouncing around his garage for about 20 minutes, destroying everything it hit, while he hid under the car. Fortunately he survived with no injury, but his garage and car were both totally destroyed in the process).
3. If the springs are not fully compressed while the Bronco is sitting on a flat surface, then it might be the shocks / struts. The only difference between a chock and a strut is that one is in the center of the spring, the other is located right next to it. Make sure that the rubber pieces on your shock/strut are in good condition, and that there is no fluid leakage. If these are broken, I recommend taking your bronco to a mechanic, because as above, these are very dangerous parts to replace if you don't know exactly what you are doing.
The only other issue that I can think of off the top of my head that would cause your tires to slant inwards is loose lug nuts ... but if it is happening on both front tires this is VERY unlikely. Make sure all of your lug nuts are tight or your tires might fall off while driving.
If you have recently swapped out the engine in your bronco for something much bigger, then you might have put more weight on the front suspension that needs to be accounted for ... and none of the above solutions will fix it. For this, you need to upgrade your front suspension to account for the extra weight -- this would require a specialty store, and after-market parts (like a lift kit).
There is also a VERY small chance that you have 2 bent axles ... but if both front tires are slanting in at about the same angle, 99.999% chance that this is not your problem. If it is just one tire that has this problem, then you will probably notice a strange bounce while driving, and this is a more likely scenario ... but I really don't think it's that.
If none of these solutions work ... please put a bit more info about your issue and I will see if I can help some more. If you were able to include a picture of the vehicle that shows how the tires look, that would be a great help. Best of luck .. and be safe if you do the work yourself.

May 24, 2011 | 1991 Ford Bronco

1 Answer

How do you remove the tire off the 2008 Dodge Charger - can't even get the lug nuts off...nothing fits


you should have a lug nut wrench in the trunk with located with the tire jack that is the proper size for the lug nuts.if you have the original wheel nuts.you turn the wrench counter clockwise to remove them from the car.if they are chrome caps over regular steel wheel nuts then the rust could change the size of the required wrench.size.if you have chrysler road side assitance(3year assitance)then they can get you a tow truck to change the tire if you call the 1-800 # if it hasn`t been over 3 years.other wise you may have to have it towed to a shop.

Apr 24, 2011 | 2008 Dodge Charger

2 Answers

This light (!) in my dodge charge came on what is


dodge charger 2008 wont start and red blinkin light on dash came on..

Jan 09, 2010 | 2008 Dodge Charger

2 Answers

Sensor light comes on(2008 Dodge Charger)


if the weather has changed and got cold your tire pressure would have dropped and would be lower. 2 options. 1 is fill ther tire to 30 psi and ride it out (remembering that when it warms up the tire pressure will automatically go up too)
2. Is to run a dry air such as nitrogen which does not change pressure in hot/cold weather.
Hope this helps

Nov 20, 2008 | 2008 Dodge Charger

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...