Question about Cars & Trucks

Open Question

How to remove a wiper arm NISSAN PRIMERA - Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75108 Answers

SOURCE: Windshield Wiper Arm

Pull up on the wiper arm, you will see a tiny little blade on the side of the wiper arm where it goes over the post, take a little screwdriver and pry that out board, this will release the arm from the post, it will be tight, wiggle the arm and pull straight out away from the post.

Posted on Oct 19, 2008

  • 2920 Answers

SOURCE: wiper arm removal 1997 GMC Jimmy

youll have to raise the hood on the truck to access the screws that hold it in place there should be 2 of them holding it

Posted on Oct 25, 2008

  • 8 Answers

SOURCE: windshield wipers

According to AllData, you don't have to remove the motor to install a new switch. Subsequently, AllData doesn't give direction on wiper arm or motor removal. Here are the only diagrams they give for switch replacement.

41917584 41917585

Posted on Nov 26, 2008

  • 1 Answer

SOURCE: nissan primera gearbox

how much is the price for nissan primera 2003 gear box

Posted on Jan 14, 2009

localwonder
  • 6784 Answers

SOURCE: how to a remove the wiper arm

Most windshield wiper arms usually fail due to a loose nut or rusted and worn out parts. Fixing this depends on how the wiper arm attaches to the vehicle. Fixing wiper arm failure is usually as easy as tightening a nut or replacing a worn out or rusted part.

Here is a step by step guide on fixing this issue.

Step1 49869_65x95_aspect.jpg Mark the existing wiper position on the windshield using a crayon. This will help you align the wiper arm correctly when you install a new one. Alternatively you can use the Trucks own markings. At the bottom center of the windshield you will see writing and three small dots. The wiper should rest on top of these dots. Step2 49870_65x95_aspect.jpg Follow the wiper arm down to where it connects with the Truck. You should find a hinged cap at the end. Step3 49871_65x95_aspect.jpg Lift this cap to reveal the nut and screw underneath. Step4 49872_65x95_aspect.jpg Use a wrench (or socket and ratchet) to loosen the nut. Step5 49873_65x95_aspect.jpg Remove the nut completely, leaving the screw stud exposed and the wiper arm free to be removed. Step6 49875_65x95_aspect.jpg Lift the arm straight up. Wiggle the arm and pull upwards at the same time until the arm slides free of the screw. If it seems stuck, push the arm back down and proceed to Step 7. Step7 49876_65x95_aspect.jpg Use a battery cable puller to pry the arm loose. Arrange so the large puller screw cap sits on top of the wiper arm screw. The outside arms have flat fingers that should be fitted underneath the wiper arm. Step8 49877_65x95_aspect.jpg Grasp the handle at the top of the puller and turn clockwise. The puller screw will push down on the wiper arm screw and simultaneously pull up on the wiper arm. A few slow turns should pop the wiper arm free.

Posted on Mar 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What windscreen wiper do I need for my Nissan Primera?


Wiper blade refills that just snap into place are the best way to service your wiper arms. These vary from standard equipment replacements to high performance tested refills. The cost varies too. From about $5. each to about $20. each...The standard replacements are usually fine...the "stealth" designs are wind tunnel tested, and may perform better for you. I demand a clear windshield, (and all windoes) and I also use "rain-ex" polich on all of the outside glass...Be sure to follow instructions on the rain-ex...It helps all windscreen wipers perform, and last longer. Hope this helps.

Jun 11, 2012 | Cars & Trucks

1 Answer

1991 primera how to replace upper suspension arms


It is pretty straightforward.

Raise and support the vehicle. Remove the tire and wheel assemblies. Remove the bolts from both ends of the upper suspension arm. Remove the suspension arm. Reverse procedure to install.

You may have to pry the thing with a pry bar to get the outer end of the suspension arm separated from the steering knuckle/strut lower end.

Mar 06, 2012 | Nissan 200SX Cars & Trucks

1 Answer

I need to know how to remove the wiper arm so that I can replace the wiper blade.


There is no need to remove the wiper arm. The Old blade can be removed with the arm on the car.

Jan 14, 2011 | Nissan Murano Cars & Trucks

1 Answer

How do you open panel under wiper arms on a 2000 nissan frontier


Hello,

To open the panel under the wiper arms on a 2000 nissan frontier.
  1. The cowl should have some type of fasteners in it that can be removed.
  2. Sometimes manufacturers place little covers over the fasteners to hide them.
  3. You'll probably have to undo some of them with the hood closed and some with the hood open.
  4. You'll definitely have to remove the wiper arms prior to removing the cowl.
That way You will e able to open the panel under the wiper arms.
Hope this was helpful. Thank You for using FixYa!!!

Jan 12, 2011 | Nissan Frontier Cars & Trucks

1 Answer

I am looking on how to replace the arm for my drivers side wiper on my nissan xterra not the wiper itself the arm inside.


On the bottom of the arm theres a cover, remove the cover and you will see a nut remove the nut and wiggle arm off,make sure to align new arm in the correct postion, so with wipers off arm should be down where it normal sits with wipers off,

Aug 09, 2010 | 2002 Nissan Xterra

1 Answer

How do you remove the windshield wiper arms of a 1990 nissan maxima


To remove the end caps from the wiper arms. When you pull back the wipers, it is the small cover that didn't pull back. Pull it back. You will see a nut, or a screw, to remove arm. Take note of wiper position beforeyou remove! They have to be put back exactly, at the same angle you tookk them off.

Jun 04, 2010 | 1990 Nissan Maxima

1 Answer

Nissan Primera 2000 Windscreen Wiper Interval mode won't work.


are u sure is not a relay thats the problem? ie the relay thinking to one speed?

Mar 07, 2010 | 2000 Nissan Maxima

3 Answers

1997 nissan sentra: windshield wiper don't work but motor is still running. How do i fix it and what could it be?


you will have to remove the panel under the wiper arms at the bottom of the windshield remove the wiper arms by popping off the little caps at the bottom of the arms where they used to pvvot. remove the nuts that hold on the arms and pull the urms upward then unsrew the panel to get inside to see which part broke off. these wiper trnsmission artms are ussually only available from the dealer.

Feb 19, 2010 | 1997 Nissan Sentra

1 Answer

How would I install an upper suspension arm to


nissan primera in the US is called an Infiniti G20. the grinding or knocking if its coming from the front, is gonna be the tension rod bushings are warn out. get new tension rods for real cheap. thats all i can help with, suspension is my thing, motor is not.

Jul 16, 2009 | 1995 Nissan 200SX

1 Answer

Replacing The wiper arm on a 2001 Nissan Quest


Removing and replacing the wiper arm is a very technical and delicate affair. If you don't handle with care you may get your windscreen broken. I advice you let an expert do this for you.

Good luck.

Apr 12, 2009 | 2001 Nissan Quest

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...