Question about GMC Sierra

1 Answer

1994 GMC Sierra 1500 p/u 5.0 ...I was wondering if there is a special way to take the front brake rotors off...cause I was trying today and they won't budge

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 328 Answers

Is it 2wd or 4wd?

Posted on Oct 18, 2013

Testimonial: "2 wheel...I heard u have to pop the cover off and there is a pin and lock nut and stuff you have to take off. if this is how its done do you have to replace all the stuff inside there or no?..Thanks"

  • 4 more comments 
  • kirbydad93 Oct 18, 2013

    2 wheel and I heard you have to take off cover and undo pin and lock nuts and things...if this is how its done do I have to replace all the insides too..Thanks

  • kirbydad93 Oct 18, 2013

    Also driver side is leaking fluid...looks like from caliper...is it better to just replace calipers at $16 each or maybe see if its a seal..or if it could be another problem all info can help..Thanks

  • s60six Oct 18, 2013

    here is a video that will help you it is much easier for you to see it rather than read a lengthly posthttp://www.youtube.com/watch?v=fz-rqvzbg...

  • s60six Oct 18, 2013

    Add a it is for an s10 but the procedure is identical to your 1500 full size

  • s60six Oct 18, 2013

    here is part 2 of the videohttp://www.youtube.com/watch?v=DddSH4zQg...

  • s60six Oct 18, 2013

    if your calipers are leaking your best bet is to replace them

×

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mick-40
  • 94 Answers

SOURCE: 2002 GMC Sierra 1500 rear brakes

Hi joelalthomas, if they replaced your brakes and you never even made it home they had better warranty the work and as for the "it was a common problem on 2002-2004 trucks" well check for Chevy recalls as this is a safety issue that would have been corrected at no expense to the vehicle owner, do a little more research my friend and let me know what happens, I will check around a little as well in the meantime I would find a new garage.Do not pay any more as you said your brakes worked fine until they worked on it good luck to you As for your 4x4 did you look at the left side when you did the right side? and were they bled off properly? you can visually check to see if the calipers are functioning

Posted on Nov 11, 2008

csmock132
  • 4669 Answers

SOURCE: trying to install an aftermarket stereo 1994 GMC 1500

You have to unplug the old radio. The radio isn't the part in the dash. That is just the control to the radio. The radio is actually under the dash above the accelerator pedal. It should have the power wires, speaker wires and antenna wire going to it.

Posted on Mar 30, 2009

  • 142 Answers

SOURCE: how to replace a starter on 1994 gmc sierra 1500

unhook the battery, there are 2 wires on the starter solenoid, 1 is a 5/16 nut and the other is a 9/16 nut remove those wires. this maybe easier to remove the heat shield first. next ther are two 9/16 bolts holding the starter in position, remove, and the starter will come out, about a 15min job

Posted on Sep 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 GMC 1500 Sierra 4.3 will not start acted like out of time so I replaced cap rotor plugs check plug wires .also replaced timing chain and gears even though no problem also changed ecm any ideas


The distributor gear. It wears down and causes rough idling to no start. Pull the distributor, look where the rotor button is pointing as it needs to go in the exact same position. you can get just the gear and replace it. it is held in by a drive pin. Push it out and swap gears and reuse the drive pin. hammer it in.

Aug 17, 2011 | 1994 GMC Sierra

1 Answer

What makes a front end shake on a 2004 GMC Sierra 1500 4X4?


FRONT END SHIMMY AND SHAKING COULD HAVE A TIRE OUT OF BALANCELOOSE OR WORN WHEEL BEARINGS, WORN OUT BALL JOINTS,WORN OUT TIE ROD ENDS, FRONT END NEED ALIGNMENT.BRAKE ROTOR WORN OUT OR WARPED, MANY THINGS WILL CAUSE FRONT END TO SHAKE SHIMMY.

Aug 09, 2011 | 2004 GMC Sierra 1500 Crew Cab

1 Answer

How do i get the front rotor off of my 2005 gmc sierra 1500 4x4. thanks


remove the front wheel then remove the caliper and brakes then remove the caliper bracket 2 bolts behind fastens to the spindle. The slide the caliper off.

Dec 02, 2010 | 2005 GMC Sierra

1 Answer

1994 gmc Sierra. Poor, soft, spongey peddle feel


well maybe the lines are not bleed right. did you bleed the master??

May 09, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

When braking on hard surface, just before dead stop, the last few feet, the ABS brakes takes over and the veh caries on a few more feet, finishing with a slow stop. The 4 wheels braking system were bled...


There was a TSB on this issue with your Sierra, a faulty or dirty ABS sensor is the cause of this problem. The fix is simple, just clean the ABS sensor at the front hub with brake parts cleaner and inspect the wire leads. At worst you may have to replace the sensor it self. Good luck

Feb 17, 2010 | 2003 GMC Sierra 1500

2 Answers

Brake pedal vibrates while braking and doesent stop right away


There's speed sensors at each wheel. You may have got some contamination in front of one of them... sounds like the abs is trying to compensate for un equal speed at each wheel... and something may be blocking a proper read at one of the wheels...

Jul 23, 2009 | 2002 GMC Sierra 1500

2 Answers

Grinding and rattleing sound on the brakes of a 99 Gmc Sierra


air in the brake lines can cause that, bleed the brakes out, not very difficult if u know anything bout brakes, i can give u steps if u dont know how

Jul 13, 2009 | 2000 GMC New Sierra 1500

2 Answers

Remove front Brake Rotor


Try opening up the caliper with a flat screwdriver thru the opening in the middle of the housing.pry on the rotor and pull towards you to push the rotor back.That should loosen it up enough for you to get it of the rotor.If that dont work you probably got a stuck caliper and have to release the brake line and do the procedure again. GOOD LUCK

May 09, 2009 | 2000 GMC Sierra 3500

2 Answers

Brakes just dont seem right.. dealer said they put on new front rotors when i 1st complained.. but only got alittle better, brakes still seem like i have to apply with alot of force, when with my wifes...


If the vehicle has rear drum brakes, I would check the adjustment on them, if they are too loose, this will cause the brake pedal to go down low.

Aug 07, 2008 | 2006 GMC Sierra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...