Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The following is verbatum from the mitsu engine overhaul manual... Steps 7 and 8 are a bit cryptic, but it seems like after you tighten the bolts to 20nm in the CORRECT PATTERN... you then go around tightening 1/4 turn through the pattern, then a final 1/4 turn through the pattern... do NOT tighten each bolt to 20, the 1/4 then another 1/4 before going to the next bolt, the idea is to get EVEN tightening across the head, so tighten her three times around the pattern! Now for the verbiage from Mitsu's overhaul manual...
(1) When installing the cylinder head bolts, check that the
shank length of each bolt meets the limit. If the limit is
exceeded, replace the bolt. - Limit: Max. 96.4 mm (3.79 in.)
(2) Install the washers.
(3) Apply engine oil to the bolt threads and washers.
(4) According to the tightening sequence, tighten the bolts to
75 Nm (54 ft.lbs.).
(5) Loosen the bolts completely.
(6) Torque the bolts to 20 Nm (14.5 -ft.lbs.)
(7) Tighten the bolts l/4 turns (90”) more.
(8) Tighten the bolts l/4 turns (90”) additionally.
Posted on Feb 15, 2009
Tips for a great answer:
Nov 10, 2016 | Mitsubishi Lancer Cars & Trucks
Mar 21, 2012 | 2002 Mitsubishi Lancer
Jun 29, 2011 | 2006 Mitsubishi Lancer
Nov 20, 2010 | 1997 Mitsubishi Diamante
Jul 29, 2010 | 1997 Mitsubishi Diamante
Jul 11, 2009 | 1997 Mitsubishi Galant
65 people viewed this question
Usually answered in minutes!