Question about 2000 Dodge Durango
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There are 3 machine bolts that hold the big white part of the head light to the truck. These bolts are black and I think 7/16 but not completely sure, maybe 12mm or so. You'll need sockets, ratchet and a really long extension. Two regular extensions won't reach the bottom one. You get to all three of them from the front of the truck straight in. Once those are out, the head light assembly pulls forward and can dangle from about 10-12 inches of extra wire. This is attached to the bulb harness. 1/3 of a turn and the wire and bulb come out of the head light. Pop the new bulb back in WITH GLOVES, do not touch those halogens. And put it back together. You can use peanut butter in a deep well or regular socket to hold the screws in to get them started, or the rag thing.
It took me 14,607 hours to find these bolts and about 10 minutes to do the job! Hope it helps out!
Posted on Feb 25, 2009
It is your computer. I had this recently as well. No Bus means no connection to the on board computer. There is a company in Florida that repairs these computers, so don't get suckered in by the dealership for 750-1000.
Posted on Mar 25, 2009
If you look down on the radiator, on the left side, there is a larrge hose coming out of the radiator toward the engine. Where the hose ends there is a housing with 2 bolts. The Thermostat is found under that. Remove the 2 bolts an replace the thermostat. Unles your arms are very long and thin, you will probably need to do this from under the car.
Perfect time to flush/fill all coolant. Check and replace any needed hoses/clamps.
Posted on May 05, 2009
i had the same problem in a dodge ram pick up. ended up being the coil. when the coil got hot my truck would die or not start again until the engine had cooled down. replaced the coil, and whalaaaaah. no more trouble. good luck!!!!!!!!!!!!!!
Posted on May 12, 2009
A Mechanic told me my switch was broken, but the switch was working fine, the lights just stopped flashing. After some research and consulting with a male friend who knows more about this than I, we discovered it was only the turn signal flasher -- a $16.00 part. On the 2000 model, it's located under the dash, on a separate fuse panel I didn't even know was there. It's to the left of the steering column and right behind the main fuse box, but you can only get to it by going up under the dash. The green one is a little hard to get to, but that's the one for the hazard lights. Its easy to see with a good shop light. It's 1" by 1" ish. The turn signal flasher is below the green one. It's black and a little smaller, and much easier to get to. You simply unplug it and plug the new one in. Voila! There are other fuses on this panel -- I'm not sure what they go to, but I intend to find out so I don't waste money replacing parts I don't need to.
Posted on Jan 20, 2010
Tips for a great answer:
Dec 06, 2014 | Dodge Durango Cars & Trucks
Nov 05, 2010 | 2000 Dodge Durango
Jul 08, 2009 | 2000 Dodge Durango
May 03, 2009 | 2000 Dodge Durango
Mar 15, 2009 | 2000 Dodge Durango
Nov 19, 2008 | 2000 Dodge Durango
14 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: