Question about 1991 Acura Integra Hatchback

1 Answer

Recently changed Head gasket on 1991 acura integra. After putting everything back up, in the order in which they were removed the fuel pump does not 'prime' when ignition switch in engaged. The wires for the coolant temperature sensor and engine temperature gauge cannot be easily reattached. Checked all fuses and switched my fuel pump relay with a friends, but no luck. Any idesa?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Expert
  • 162 Answers

Try the main relay. Common problem, grey box under dash.

Posted on Oct 20, 2013

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
YellowNo5
  • 268 Answers

SOURCE: 1991 ACURA INTEGRA WONT START,

Bring the main relay from under the left side of the dash into view and tap it with a screwdriver while your trying to start the car. If this starts the car... then you can take the cover off of it and look really close for broken solder. Re-melt the solder and it will work. Don't be surprised if you replace it with another used one and it won't work, most all of these go bad eventually... had to fix many of them.

Posted on Jan 04, 2011

  • 3 Answers

SOURCE: 1996 Acura integra no spark and no fuel?

get a better job

Posted on Feb 19, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1991 Acura Integra wont rev past 1500 RPM and is blowing out dry white smoke from the exhaust. Idles fine, but sputters when you give it gas. Changed the fuel filter and the fuel pressure regulator...


catalytic converter stopped up. while running put hand over exhaust feel how much pressure coming out . hold dollar bill at exhaust it should make dollar stand out away from it

Nov 12, 2010 | 1991 Acura Integra Hatchback

1 Answer

How do I disable the ABS light on my 1996 Acura Integra?


Take out the dash bezel, then the guage cluster. The ABS light plugs into the back of the cluster. uplug it and let it hang or put a piece of electrical tape over the face and trim it to fit exactly. Plug it back in and put everything back in in reverse order.

There are 2 philips head screws on the top side of the inside of the bezel and the guage cluster has 4 10mm bolts holding them in.

Oct 17, 2009 | 1996 Acura Integra GS-R

1 Answer

1991 acura integra power loss, won't rev over 3000rpm code 16 fuel injectors. changed injectors and fuel filter. air/fuel meter not reading.


check the o2 sensor if thats not it something maybe blocking your intake and if thats not it then it could have something to do with the computer (ecu) check the cables that connect to the ecu cause my moms cadillac had the same problem so just disconnect the ecu plug it back up

Sep 16, 2009 | 1991 Acura Integra Hatchback

1 Answer

Where is the pump located i was told under the back seat but also in the corner of the tank and i need to drop it to change the pump help me


Hi,

Its physically inside of the fuel tank. You must remove the back seats to get to the little plate that has three screws and take that off to get to it.

Thanks.

Jul 02, 2009 | 1991 Acura Integra Hatchback

1 Answer

My 91 acura integra with a 95 gsr motor in it starts, then dies right away. I replaced the spark plugs, checked for spark through the wires, and checked to see if fuel was coming from the pump. Everything...


did you check the fuel pressur on the fuel rail with a gauge or did you just unplug the pressure reg..

also you should try replacing the fuel filter first... this is cheap 6-12 dollars autozone. just becuase the fuel pump is pumping doesnt mean it its enough. There mightbe a strainer on the fuel pump that might be plugged.

Jun 05, 2009 | 1991 Acura Integra Hatchback

3 Answers

1988 acura integra overheating


radiator replace or get rodded check radiator temp at top and bottom should be about 10deg differance

Jan 06, 2009 | 1997 Acura Integra Type R

2 Answers

Blown head gasget


Well what you may have to do is replace the gasket.
U have to buy one and then replace it. In order to do that u have to take the heads off. Take the old gasket off. Put your new one where the old one was. And apply some sealant so that it will stay. Once u do that. Just put everything back together. Or u can take the easy way and pay someone to do it. But thats all that i know. Hopefully it helps you with your problem.

May 24, 2008 | 1990 Acura Integra Hatchback

Not finding what you are looking for?
1991 Acura Integra Hatchback Logo

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...