Question about 1997 Chevrolet Tahoe
Hi i am 6`3 and 340 lbs. I am having a problem with my driver seat. I think i am too tall for this seat. I am getting back pain when I sit down for 5 min, and it gets worse when i am in the car any longer. i have a lumbar support, but it doesn't help. I don't know what to do - I bought the car used.
You could try to find a set of gmc equivalent seats, the gmc seats are fully adjustable and should bolt right in. Also I have a friend who says caddy escalade seats will fit.
Posted on Oct 18, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I AM NOT GOOD WITH UPHOLSTERY BUT I BUY ON EBAY ONCE IN A WHILE AND I FOUND A GOOD UPHOLSTERY GUY THAT YOU CAN GET THIS SEAT OR JUST THE BOTTOM FROM IF YOU NEED IT .. I HAD HIM DO ME ONE FOR MY LEATHER SUBURBAN AND WOW ITS NICE AND I PUT IT ON EASILY THE HARD PART WAS TAKING THE SEAT OUT THEN FOUND OUT IT WAS A SNAP TO PUT ON .. THE GUYS NAME ON EBAY IS upholsteryguys IF YOU NEED ANY HELP WITH THIS LET ME KNOW YOU WILL BE IMPRESSED WITH HIS WORK.. AS FAR AS THE HEATED SEATS AND THE LUMBAR GOES YOU MIGHT FIND THE PROBLEM WHEN YOU GET IT APPART PUTTING ON THE COVERS .. USUALLY THEY GET BAD CONNECTIONS AFTER A WHILE.. THANKS JERRY AND HOLLER IF YOU NEED MORE.
Posted on Apr 20, 2009
SOURCE: 1998 corvette Drivers Seat 4
the 10 amp fuse you checked is for the lumbar support, there is also a 20 amp circuit breaker in the fuse box there are two of them on for each seat, the drivers side is # 35 20 amp and hear is were we need to start, remove the circuit breaker and test for 12 volt at the circuit breaker, if there is 12 volt try swapping the two circuit breakers and if the seat then works replace the circuit breaker, if not then you will need to get to the wiring plug-in under the seat and check for power to both orange wires if no power on one or both wires then there is a brake between the fuse box and the seat, look real close were the wiring has to bend at the bottom of the seat rail this is were we see most brakes, if there is power at both orange wires then you need to test for power at the gray wire coming out of the switch wile holding the seat adjuster in the froward position, if there is no power replace the switch if there is power replace the motor pack under the seat.
let me know if there is any thing else you need.
Posted on Apr 14, 2011
Tips for a great answer:
Jan 10, 2013 | 2008 Chrysler Sebring Convertible
Apr 30, 2017 | Cars & Trucks
Feb 09, 2012 | 1985 Buick Riviera
Nov 17, 2010 | 2000 Volkswagen Beetle
Oct 12, 2010 | Chevrolet Beretta Cars & Trucks
Apr 04, 2010 | 2006 Honda Pilot
Jan 05, 2010 | 2000 Lincoln LS
Dec 06, 2009 | 1999 Jeep Grand Cherokee
Sep 05, 2009 | 1997 Acura CL
91 people viewed this question
Usually answered in minutes!