Question about 2005 Ford Ikon 1.6i

1 Answer

My car beeped and it locked all the systems.it is no longer starting or cranking.i accidentaly pressed the bonnet switch when i was doing a minor service so when i lifted my hand,it beeped and activated the immobiliser or the alarm.i have been with this car for a year now.pliz help

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 14 Answers

First check your battery terminals for looseness whether insolation caused acid corrosion ,if ok check all your fuses mainly in engine compartment,if ok check your ignition switch ,remove steering cover to observe any burns on all plugs connections

Posted on Dec 14, 2013

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: Alarm sounds when unlocking my 1995 ford mondeo

make sure it is not in valet mode ,check batteries in remote from 7to 10 feet

Posted on Apr 14, 2009

  • 2 Answers

SOURCE: car wont start changed the battery but doesnt

have your alternator checked. I have recently had the same issue in a different brand of car. Initially thought it was the battery because that the system light that displayed for the issue. However when taken in to the shop found out there was nothing wrong with the battery, something was failing in the alternator. This problem is most present in extreme cold and hot conditions.

Posted on Dec 12, 2009

fixitriteman
  • 431 Answers

SOURCE: how can i disable the anti theft alarm system. my

Call your dealer with prof of ownership they can walk you through it . or call a lock smith , Sorry but for obvious reasons I wont be of any other help on this one. PS hope you can under stand . Thank You .

Posted on Mar 30, 2010

Danniboi
  • 1098 Answers

SOURCE: I have a M9601 alarm and M99 immobiliser fitted to

Hi

if the battery is not much good then you will get issues like this also being a ford I would check the earth connection from the car battery to the car body, the main feed. also there is another o the gearbox and another that runs to the altenator, these are all common poor earth problems. ensure they have a good conatct.

Secondly have you checked the fuel relay is not loose or maybe on it's way out, this again is not unusual, if the relay fails then it has an electro magnet inside, poor powr from the battery will make it stick either open or closed like a light switch kinda, you should here it ticking at the fuse box when the key is turned, also immobilisers often use this part of the cars wiring to stop fuel coming to the engine as a security measure. Maybe thats the issue the immobiliser shutting the relay down.

I would certainly check that first as its super simp,e to replace.
Regards
Dan

p.s if you need more info get back to me

Posted on Jan 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove auto door locks


  1. Put the key in the ignition and turn it to on.
  2. Press the Unlock button three times.
  3. Turn the ignition off.
  4. Press the Unlock button three more times.
  5. Turn the ignition back to on.
  6. The horn should beep once. This tells you that you're now in programming mode.
  7. Press the Unlock button, then press Lock again. The horn will beep once to tell you that Auto Lock was deactivated. It will beep twice if you're reactivating the system
There are many ways, I'm not sure which one will work on your car. I answered the two ways. I hope it works.

1. Open the driver's door and put the shifter in Park
2. Turn the ignition to On (II).
3. Press and hold the unlock side of the master lock switch for five seconds until you hear two clicks.
4. Within five seconds, turn the ignition to the Lock position.


Mar 24, 2017 | Cars & Trucks

1 Answer

I have a jaguar x type and when I try pairing key with car I get a beeping sound but boot and lights will work on keyfob any helpthanks


sounds like you have a faulty door latch or bonnet switch. does the doors all lock/unlock mechanicaly with the key? if not the one that is not working has a faulty latch switch if all works check the bonnet switch the beep from the security system is thinking a door or boot/bonnet is open. hope this helps

Oct 23, 2016 | Jaguar X-Type Cars & Trucks

1 Answer

Hi ive got a mg ztt how do you disconnect the alarm every time I locked the car today it keeps going off thanks


As the alarm is part of the immobiliser, you can't really turn it off.

Does it give a short beep when you lock it? If so, it's telling you a door/bonnet/tailgate is open. The dash display should tell you which.

It's often one of two bonnet switches which causes random alarms.

Feb 15, 2015 | MG Cars & Trucks

1 Answer

Remote key will not lock the car doors


It may be that one door is not able to shut completely due to an obstructon, adjustment or a faulty door switch

Feb 23, 2014 | 1995 Volkswagen Jetta

1 Answer

Ford Sierra 2.0i DOHC, engine turns but will not start. No spark and no fuel pressure. has ford anti theft system/ immobiliser, which arms when door is locked and disarmed when unlocked. I can only as


Sounds like alarm module has failed. Call ford parts and ask if common failure, if so replace. You could disconnect the alarm module and see if the car starts.

Jul 07, 2012 | Cars & Trucks

1 Answer

VZ 2005 ute central locking works well from the


is it a factory or aftermarket security system?

Apr 28, 2010 | 2008 GMC Savana Cargo

1 Answer

Where is the bonnet closed sensor on the landrover discovery 3, my horn beeps when locking car and an error message says bonnet open. I'm away in Germany for a month which isn't much help.Any advice on...


After more thorough search in better light and removing grill etc. I found the bonnet sensor is underneath the RIGHT HAND bonnet latch (opposite side to battery for RH Drive models). there is a mini plug,with 2 contacts accessible from engine side without removing the grill, release plug latch to remove plug and short out the two pins of the plug then tape to secure. I can now lock the car without the horn blowing. As for replacing the actual switch, that will be another small job but when I return to the UK.

Peter Martin

Aug 15, 2009 | 2006 Land Rover LR3

1 Answer

Audi A8L MMI Car Button Reboots


Had a similar problem on my 2006 A8L
It appears that "Car" botton got stuck in pressed position due to some sand getting between buttons, another time it was "Nav" one.
After minor cleaning, and popping button back to normal position, works fine.

Jul 14, 2009 | 2004 Audi A8

4 Answers

Honda crx electric roof fault. All the warnings work when starting the car and when one of the latches are open. when the dash switch is pressed a click can be heard from the rear of the car. The boot...


Hi Paul
I dont know wether you have managed to solve your problem with the roof yet, but I have tried sorting out a simular problem. First off all if you need to reset the computor in the boot , to do this remove the 7.5 amp back up fuse under the bonnet for approx 10 seconds. before doing this make sure all locks are in the closed possition. Also make sure the roof mechanism is fully down. Once the fuse is back in and the key is in the ignition the car will go into diagnostic mode for the boot and roof.
The easy way to check the roof locks is to open passenger side and see if the car starts to beep if so close the lock and the beeping should stop this shows all is ok. Now do the same on the drivers side.After doing these checks you will need to reset the computer again with removal of the 7.5 amp fuse for 10 seconds.
Its worth checking the 20 amp fuse for the power door locks this fuse is under the dash board.

I hope this is some help.

Jun 05, 2009 | 1994 Honda Civic Del Sol

1 Answer

Locks go up and down and it beeps


DO YOU HAVE AN ALARM SYSTEM ON THIS CAR?IF YOU DO DISCONNECT IT.

Dec 13, 2008 | 1999 Ford Taurus

Not finding what you are looking for?
2005 Ford Ikon 1.6i Logo

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...