Question about 2003 Chrysler PT Cruiser

2 Answers

Wont start battery and starter ok - 2003 Chrysler PT Cruiser

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 125 Answers

Could be the starter relay

Posted on Oct 17, 2013

  • Jonah Oneal Oct 18, 2013

    if battery and starter okay engine wont turn over.if gauge lights dont come on with ignition switch on could have blowed ignition fuse or bad ignition switch.try jump start vechicle if engine cranks could have bad battery cables poor ground cable.if dash lights turn on starter wont turn over engine could have faulty transmission neutral switch or clutch safety switch for manual transmission.vechicle could be in theft mode or could have faulty starter relay.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 14,036 Answers

Will starter rotate engine.

Posted on Oct 17, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1997 Toyota Tacoma new battery, clamps,& fuses.wont turn over NO sounds when key is turned .lights are only thing working????? . What am I missing


Have you tried tapping on the starter then trying to start the vehicle may be a bad spot in starter usually if no sound when trying to start and new battery will mean the starter is no good . Starter can be found by following the positive cable off the battery.

Dec 03, 2016 | Toyota Cars & Trucks

2 Answers

1991 Toyota Pickup - wont start....battery is ok


faulty starter relay, faulty starter, faulty starter switch, (not to be confused with key switch), how do you know your battery is ok? it could lose its charge overtime/have a dead cell, might have enough energy for lights, but not a high draw thing like a starter. Make sure your battery has 12.5 volts, 13.5 volts being nice and fully charged. check battery connections at both ends, battery and starter ends.

Dec 15, 2013 | Toyota Cars & Trucks

2 Answers

Van wont start


-Check for spark and fuel.


mai

Mar 21, 2013 | Cars & Trucks

1 Answer

Car wont start when hot, starter wont kick in


Not sure how you could check the starter hot, but the main components are the battery, key switch, neutral safety switch, and starter. A mechanic would check for voltage at each connection.

Aug 15, 2012 | 2004 Mercury Mountaineer

2 Answers

Not a handy man or fix it man. 04 tribute, wont start, battery wont jump start but dash board lights are on, there is a click click click noise and it wont start


Clicking noise is the sound of the starter being bad and not having enough power to turn the motor over. Replace the starter.

Jul 05, 2011 | 2004 Mazda Tribute

2 Answers

Car wont start: 1. Had it tested technician sad


Car not starting or turning over indicates towards multiple possibilities. It can be issue with battery or weak battery. But if battery checks out ok, then it can be starter issue or faulty alternator or problem with low fuel pressure or no spark at spark plugs due to dirty spark plugs or faulty ignition coil or injectors getting cracked or dirty and needs to be cleaned.


To confirm the problem, the basic troubleshooting is required.


Click this link below and follow the troubleshooting:------

http://technoanswers.blogspot.in/2012/02/car-starting-issues.html

---------

This will help.

Thanks

Jun 23, 2010 | Cars & Trucks

1 Answer

Wont start--pulled starter bench tested ok


check your ignition did one of these before changed 3 starters before finding out it was ignition switch not making connection in switch good luck

Feb 07, 2010 | 1997 GMC Jimmy

2 Answers

2001 nissan pathfinder- car wont start


Check tightness of the clamps on battery & make sure the earth cable is tight from battery to engine, also check tightness of nut holding the cable 2 starter motor if all ok there its most probably the solenoid on top of starter motor replace this with new all will b ok.

Mar 12, 2009 | 1999 Nissan Pathfinder

1 Answer

2.5 jeep wangler 1999 wont start .starter checks out ok


Could be a bad connection between the battery and starter. Starter solenoid, or neutral safety switch if it is standard transmission.
Check for power at the solenoid.
Lone99star

Jan 26, 2009 | 1999 Jeep Wrangler

Not finding what you are looking for?
2003 Chrysler PT Cruiser Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...