Question about 1999 Ford Escort

Open Question

Trying to locate intake manifold runner control?

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
66 chrgr
  • 1011 Answers

SOURCE: INTAKE MANIFOLD CONTRL RUNNER VAVLE LOCATIONS

they are on the back side of the motor just above the transmission .take off the dog house and you will see the unit.

Posted on Jan 25, 2009

Ad
airjer995
  • 5332 Answers

SOURCE: Could you show me a

they will be on the passenger side of the engine mounted to the lower intake just under the intake plenum. This pictures shows them with the intake plenum removed. airjer995_87.jpg

Posted on Sep 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2008 dodge avenger code p2004


Intake Manifold runner control stuck open - bank one:
- Intake Manifold Runner Binding Or Sticking
- Faulty Manifold flow valve
- Manifold flow valve harness is open or shorted
- Manifold flow valve circuit poor electrical connection

There is a factory service bulletin for this problem for 2007-2008 Dodge Avengers. (JS)

Sep 22, 2015 | Dodge Cars & Trucks

1 Answer

How to fix code p2004 on 2005 ford focus


you code is here

P2004 Ford Intake Manifold Runner Control Stuck Open Bank 1


Possible causes - Intake Manifold Runner Control (IMRC) monitor signal shorted to power
- Faulty Intake Manifold Runner Control (IMRC) actuator
- Faulty Intake Manifold Runner Control (IMRC) solenoid
- Damage Powertrain Control Module (PCM)
- Blocked vacuum hoses
alt="What does this mean?"> What does this mean? Possible symptoms - Engine Light ON (or Service Engine Soon Warning Light) P2004 Ford Description The P2004 is set when the Intake Manifold Runner Control (IMRC) is commanded closed by the Powertrain Control Module (PCM), but the IMRC indicates open.


Read more: http://engine-codes.com/p2004_ford.html#ixzz3lke1SreV

Sep 14, 2015 | Ford Cars & Trucks

1 Answer

Where can I get a diagram of the intake manifold runner control?


Do a Web search under the terms (Your make, model, year vehicle) intake manifold runner. Or intake runner control solenoids, rods, etc. You may find Youtube videos.

The runners are sandwiched under or inside the intake manifold. Some had plastic clips which crumbled and the operating rods became disconnected. Some runners stuck too bad for the rods to move them.

Jun 30, 2015 | 2003 Ford Mustang

2 Answers

P2004 code. where is the imrc valve located?


It is attached to the intake manifold, it is a valve that adjusts the runner length of the intake for optimal performance and fuel economy.

Jan 25, 2015 | 2006 Pontiac G6 GTP

1 Answer

Where is the intake manifold runner control on a 2007 ford focus


07 focus ,which engine?
alldata.com its there.
login .

May 13, 2014 | Cars & Trucks

1 Answer

Ford F140 4.2 Do Engine codes P0305, P0306, and P1518 relate to each other


I am assuming you mean F150 truck.
The answer is maybe.
Code 305 and 306 are missfire codes for cylinders 5 and 6.
Code 1518 is for a problem with the intake manifold runner control which could cause the other two codes.

P1518 FORD Description The Intake Manifold Runner Control (IMRC) is monitored for failure during continuous or key ON engine OFF self-test.
Possible causes - Intake Manifold Runner Control (IMRC) harness is open or shorted
- Intake Manifold Runner Control (IMRC) circuit poor electrical connection
- Faulty Intake Manifold Runner Control (IMRC) actuator
- Faulty Engine Control Module (ECM)
Read more: http://engine-codes.com/p1518_ford.html#ixzz2KSN6Thui

Feb 10, 2013 | Ford Cars & Trucks

1 Answer

P2006 ford f150


This Code means that the Intake Runner Control on Bank One is stuck closed. An intake runner is a part which acts like a gate and diverts airflow inside the Intake manifold.

Some have control rods which attach with plastic clips and the clips break causing the control rod to unseat in its place. They may use solenoids that are electric or Vacuum controlled and the rods on these devices are what moves the runners.

Often you can take the intake manifold off and clean the runner or reattach the rods.

Please rate my info.

Jan 18, 2013 | 2004 Ford F150

1 Answer

Check engine light on, Code P 2004 Nissan Altima 2.5


I can tell you what it is and about where it is, but I have not worked on that engine before.

The intake runner should be between the intake manifold and the cylinder head. It is like a sliding shutter. You can sometimes clean them, but they can be replaced. Look online for photos by autoparts stores. This will explain things better if you see it.

Why they put them on cars? The operating range for intake manifolds is limited. Manifolds are shaped for performance or economy. With movable shutters inside the manifold you get a manifold that will do both jobs.

How are they activated? Most use Vacuum controls to move rods that move the vanes or shutters in the runner. In your case, the manifold runner activated and is stuck open. Now you can look at whether the control rod popped off or the activating Vacuum diaphram is jammed. But most use Vacuum power to open and flow to close them.

Your Maker is not alone in using these devices. Other makers have similar problems with their operation. Sometimes soot can build up and they fail to move.

I hope my solution is useful.

Oct 01, 2012 | 2009 Nissan Altima 2.5

2 Answers

ENGINE LIGHT ON SLIGHT LOSS OF POWER AND POSSIBLE RATTLE


p2004 (Intake Manifold Runner Control Stuck Open)You need to take a look at the IMRC actuators on the intake manifold. You can try using a screwdriver or other tool to move the actuators to see if one is stuck in the open position. Do not use your fingers to do this, because if one is open and decides to close it has a bit of force behind it and can injure you. If the IMRC is stuck open, it is usually due to deposits in the intake manifold. Repair involves removing the upper intake manifold and cleaning out any deposits in the IMRC plate area. I would try running some Techron Concentrate in 2 tanks of gas to see if it dissolves enough of the gunk on the plates to free up the stuck one. Certainly a lot cheaper than having to pull the intake manifold and cleaning the plates. Always run tier one gasoline like Shell or Chevron to reduce the buidup of deposits.

Dec 19, 2008 | 2004 Honda Accord

1 Answer

INTAKE MANIFOLD CONTRL RUNNER VAVLE LOCATIONS


they are on the back side of the motor just above the transmission .take off the dog house and you will see the unit.

Jul 30, 2008 | 1997 Ford Econoline

Not finding what you are looking for?
1999 Ford Escort Logo

Related Topics:

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5522 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...