Question about 2002 Chevrolet Avalanche
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Heater does not work
fuse in the fuse panel , or heater core temperature sensor switch , next if it blows but no heat coming thur vents check the raditor for collant level also possible heater core thanks
Posted on Feb 14, 2009
SOURCE: howling noise while driving.
Need a little humor now and then, anyway it sounds like you have a pinion gear bearing that's noisy, they really howl when they get worn out, in order to change this bearing the rear end gears must be removed, new bearings should be installed on all parts, 4 total, the metal from the failed pinion bearing will ruin the rest of the bearings, might as well only do it once, also change the axle bearings and seals while you are in there.
Posted on Feb 27, 2009
Look down under the vehicle, on the inside of the frame, on the drivers side frame rail, right about where the front of the bed and back of the cab meet. Being a 2002 this is where the filter should be if its not there its inside the gas tank and you wont need to worry about it. thanks for using fixya!! lemme know if you find it.
Posted on Mar 15, 2009
You need to remove the 2 bolts that attach the caliper to the mounting bracket (big metal) with an 18mm socket, use a 1/2" drive ratchet to give you some torque. If you are removing the other bolts that just "turn" you are on the wrong bolts, these are the bolts that allow the caliper to slide in and out freely. you should be able to then use a ligth hammer to tap the entire assemble off of the rotor. then replace you pads and rotors if needed. also your parking brake is located inside the drum of the rear rotor. Making adjustments to these can be quite a process but can be done in the driveway. good luck.
Posted on Apr 05, 2009
Tips for a great answer:
Jun 10, 2016 | Cars & Trucks
Aug 09, 2015 | Cars & Trucks
Nov 17, 2012 | 2002 Chevrolet Avalanche
Mar 06, 2012 | 2002 Chevrolet Avalanche
Nov 23, 2010 | 2002 Chevrolet Avalanche
Oct 14, 2009 | 2002 Chevrolet Avalanche
Oct 06, 2009 | 2004 Chevrolet Avalanche
Feb 19, 2009 | 2002 Chevrolet Avalanche
113 people viewed this question
Usually answered in minutes!