Question about 2001 Dodge Intrepid

1 Answer

I am getting P0700 and P740 what do they mean? P0740 states that TCC Circuit Malfunctioning, what does that mean? I took my car to a repair shop and was told that it would cost me $1400 to fix it. I would like to know if I can fix it myself. I appreciate your assistance. Thank you

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 100 Answers

P0700 is an information code from the transmission controller to the engine controller(computer) it says "hey I'm having trouble making the trans do what I want it to!" P0740 is a trans code saying that the TorqueConvertorControl system isn't working. Could be the solenoid pack, valve body or the torque converter itself. I would recommend to leave this for a pro! $1400 is a fair price.

Posted on Oct 18, 2013

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1757 Answers

SOURCE: I get codes p0700 and p0740 on a dodge grand

P 0700 = EATX (Electronic Automatic Transmission Communication) Controller DTC Present. = An automatic transmission input DTC has been set in the transmission controller.
P 0740 = Torque Converter Clutch. No RPM Drop at Lockup. = Relationship between engine speed and vehicle speed indicates no torque converter clutch engagement.

Yes the Fluid and Filter Change should take care of this. However, Dodge, Chrysler, and Plymouth Minivans have had alot of Transmission problems over the years. Make sure that whomever changes the Transmission Fluid that they use exactly what is specified. Also, do not let any Mechanic talk you into a Superflush of the Transmission. This procedure does not change the Filter.

Let me know if this helped, or if you have additional information or questions. Feel free to contact me at FixYa.com!

Posted on Jan 15, 2010

keeperoffire
  • 106 Answers

SOURCE: 2002 Dodge Caravan, Tranny would shift, DTC P0700, P0725

replace the input speed sensor to transmission and the wiring pigtail all are available at your chrysler dealer take your vehicle registration in to the parts counter so they have your vin # to get the right part and it is the front of trans by fluid linres to radiator.

Posted on Mar 08, 2009

  • 158 Answers

SOURCE: P1740 trouble code on a 2001 Dodge Ram 1500

There is one solenoid assy with two solenoids on it. One for the TCC and other for OD. in my experience, P1740 is caused by a couple of things. The torque converters are a subject of trouble for one - I always replace them - the other are the input sealing rings on the input shaft. Older designs leak pressure. Always replace with the plastic - **** end type which is the update today. P1740 has nothing to with the governor solenoid or sensor

Posted on Apr 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is p740 cel code for 1999 acura trl code means?


If you mean P0740, it is for the torque convertor clutch circuit.

May 25, 2014 | 1999 Acura TL

2 Answers

2001 Dodge Grand Caravan ES 3.8L AWD; 152K miles; Had leaking solenoid pack replaced with brand new (Bosch?) unit in March (along with new trans fluid--proper type as always--and filter). A couple of...


P0740 Torque Converter Clutch Circuit Malfunction Driving the vehicle with this problem and not attending to it asap may cause further damage. When you feel a problem and or see the engine light on, use your head wisely and have a reputable transmission shop go through a complete diagnostic procedure, in most cases this is a fluid problem, but since you serviced the trans that can be ruled out, if you haven't changed the TCC solenoid yet do so, I was unclear about what you replaced, I assume the shift solenoid's, if you have replaced the TCC solenoid then the problem is either in the wiring to the trans or inside the trans in the torque converter clutch circuit or the torque converter itself, which is a all to common failure in these Vans, if the TCC is ok replace the torque converter, that of course requires removing the trans, this job will require a lift, it is just about impossible on the ground.

Aug 06, 2009 | Dodge Grand Caravan Cars & Trucks

1 Answer

Po7400


for P0740 it is:
OBD-2 P0740 - Torque Converter Clutch Circuit/Open
OBD 2 net 24048029-pmx1u32kwnqlluv3tiqttm5t-1-0.jpg TCC malfunciton P0740 OBD II Code

Apr 08, 2014 | 1997 BMW Z3 Roadster

1 Answer

2003 grand caravan error code po740 and po700 740 is torque solenoid. how do you replace


P0700 means a indicative transmission malfunction, allways this code appears with other, in your case, P0740.
The P0740 code pertains to the TCC solinoid in the transmission, and often comes and goes, so it may not reappear for some time... enough for you to get through the inspection before you decide to have the transmission diagnosed. The torque converter is a device mounted between the engine and transmission. This device transfers engine power to the trans. This code may indicate posssible failure to engage.

Hope helps.

Mar 02, 2012 | Cars & Trucks

1 Answer

2003 grand caravan error code po740 and po700 740 is torque solenoid. how do you replace


Hi there:P0700 means a indicative transmission malfunction, allways this code appears with other, in your case, P0740.
The P0740 code pertains to the TCC solinoid in the transmission, and often comes and goes, so it may not reappear for some time... enough for you to get through the inspection before you decide to have the transmission diagnosed. The torque converter is a device mounted between the engine and transmission. This device transfers engine power to the trans. This code may indicate posssible failure to engage.

Hope this helps.

Mar 02, 2012 | Cars & Trucks

1 Answer

I have a 1997 Grand Caravan 3.8L. The Transmission was rebuilt about 3 years ago ( 35-40,000 miles ago). It doesn't feel like anything is wrong. The engine light came on today and I scanned it... It...


well i don't know a whole lot about the dodges but i do know that when a transmission is rebuilt, or you get a new transmission, most of your outer parts, sensors, and modules are transfered over or reused, so it is very well possible that it could be one of those.

Jun 18, 2011 | Dodge Caravan Cars & Trucks

1 Answer

My 2002 pt cruiser check engine light came on today i took it to auto zone they hooked up a computer and it came back with 2 codes wrong a p0700 and a p0740 what does this mean and is it expensive to fix


P0700 simply means there is a fault code present in the transmission module (TCM). P0740 Torque converter clutch circuit. This is usually caused by a worn out torque converter clutch which would involve replacing the torque converter and yes it would be expensive to repair if that is the cause. Diagnosis is usually made with a scanner and other equipment.

Apr 20, 2011 | 2002 Chrysler PT Cruiser

1 Answer

I have a 97 dodge avenger and am getting engine codes p0740, p1297, p0160, p0700


P0160....O2 Sensor Circuit No Activity Detected (Bank 2 Sensor 2)
P0700....Transmission Control System (MIL Request)
P0740....Torque Converter Clutch Circuit
p1297 doesnt exist in my GM code list sorry but in generic codes they only have a 0 infront of them

Aug 17, 2010 | Dodge Avenger Cars & Trucks

1 Answer

What is the TCC CODE?


Torque Converter Clutch Solenoid Circuit
Code means that the TCC solenoids is bad and usualy appears with the ODB Code P0740.

Check it.

Jun 26, 2010 | 1999 Kia Sephia

1 Answer

1997 blazer sluggish in drive reverse is fine


P0740 is TCC circuit malfunction P0753 is shift solenoid A circuit electrical P0758 is shift solenoid B P1406 is EGR pintle position and P01860 is TCC circuit.

Feb 03, 2009 | 1997 Chevrolet Blazer

Not finding what you are looking for?
2001 Dodge Intrepid Logo

336 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...