At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: My 91 olds cutlas doesnt seem to have any spark,how...
Check spark with hei spark plug tool at cylinder wire and the coil itself at distributor if no spark check rotor and cap for crack ,defect, bad terminal check for current at coil and distributor
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Did it have this problem before you changed the fuel pump an filter ? When it dies an won't restart for hours ,is there spark at the coils ? What engine does yours have V-6 . Check for spark the way this guy does in this video. GM Ignition System diagnosis 1988 Olds Cutlass Same ignition system >
does it run fine until u put it drive if so ur torque converter is locking up and stahling the engine on this car only the torque is electric controlled only... unplug the wiring on the transmission u should be fine
Should be on the passenger side of the engine compartment. You would need to check for spark at the plugs and fuel pressure before looking at the computer.
Doesn't seem to have spark?? did you use a tester?? basic needs, spark tester(in line works best) fuel pressure guage, injector signal tester(noid light) and finally compression guage, rad tester optional, check spark and injector signal, the remove spark plugs and note their color, do a compression test, all cylinders should read within 10 percent, lo compression on one or two indicate head gasket, no compression timing belt, have fun
Just pull or pry the axle out of the trans, the clip is on the end of the axle. It just has a groove to retain the axle in so it doesnt just slide out on its own.
×