Question about Chevrolet Malibu
Where is the inertia fuel switch on a 2001 chevy malibu
A good way to check the fuel pump relay is to find the A/C compressor relay and swap them. They are the same exact part and its better than going out and buying a relay you may not need:http://www.diyobd2.fr/wholesale/fvdi-abrites-commander-for-renaultv52-2313.html Also, this is a good roadside emergency fix should you ever need it (I have).
Posted on Oct 17, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
First, if your car still runs, pull the fuel pump relay, and start your car, letting it run until it dies. This will depressurize the fuel system. Then you must support the fuel tank, and take loose the straps that hold it up. Slowly lower the tank until you can unhook the tank filler hose and overflow hose by taking the clamps off and sliding the hoses off. lower it some more, and unhook the fuel lines; they require you to insert a special tool around the edge of the connection, however this can be improvised with screwdrivers or a piece of plastic or metal bent into a C shape. Next unhook the wire connection. Once you get it down, it's easiest to empty as much fuel as you can; as this will help you get it back into place. The fuel pump is inside the tank, which locks into place with a 1/8th turn. You will need a hammer and a brass punch for this job, as it needs to be tapped around to unlock. It will then lift out. Compare the two pump assemblies. The inside parts can be slightly different, but ensure that the fuel lines are IDENTICAL and the wire connection is IDENTICAL. The new one will come with a new silicone seal. Ensure that you don't put the new one in in such a way as the float doesn't bind, otherwise you'll be doing this procedure again if you don't like guessing how much gas you have. This can be a challenge to wrestle with putting the new one in, as you have to push it down to compress the new seal, and turn it to lock it. Once you get it started, you can let up and use the hammer and punch again to tighten it the rest of the way. Next, put it back together just as you took it apart, and don't forget to hook up the wires, hoses, and fuel lines. No tools required for the fuel lines, they just snap together. Once everything's tight and hooked up, put gas back in it, and if you haven't already, put the fuel pump relay back in. This you can do as soon as the car dies, and is completely optional if the car won't run at all. You are now ready to start it up, but turn the ignition on to the run position, wait a few seconds for the pump to pressurize, and then start it. Have fun, and feel free to ask any questions should you have any.
Posted on Feb 22, 2010
Tips for a great answer:
Dec 12, 2016 | 2003 Chevrolet Impala
Oct 10, 2016 | 2014 Chevrolet Malibu
Jul 01, 2016 | 2001 Chevrolet Malibu
Feb 03, 2016 | Cars & Trucks
Dec 23, 2015 | Cars & Trucks
Oct 09, 2015 | Cars & Trucks
Apr 26, 2013 | 2001 Chevrolet Malibu
May 03, 2010 | 2001 Chevrolet Malibu
163 people viewed this question
Usually answered in minutes!