Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Hyundai excel 1997 sprint
Hi, if it is an early 97 12valve engine the plugs will be accessed through between the exhaust manifold sections at the front of the motor. if it is a 16 valve, then you remove the plug leads to get access undo them, then use the lead cap to remove the plugs, ie wqhen the plug is undone, push the lead cap back onto the plug, and lift it out. you certainly would not need to remove the valve cover.
Posted on Jun 22, 2008
if you have the owners log books for the car look to see if the code is in there
if you do not have it then you need to get the model and chassis number from the top of the unit
then you need to go to Hyundai and they will get the code number and they will give it to you
i think you are better off going and getting a new cd player and having that installed
hope that helps
Posted on Dec 27, 2008
Hi first lift the car and be sure to secure the car that it wouldn't fall when your under the car, remove the wheels then disconnect the negative cable from the battery remove the axles, remove the transmission mount, remove the starter, remove the bolts around the transmission housing once you remove the bolts use a floor jack and put it under the transmission then use a prior and separate the tranny from the engine and bring the tranny to the floor now you have the clutch expose remove the old clutch and pressure plate and pilot bearing now do the same thing in reverse good luck
Posted on Sep 02, 2009
SOURCE: cltuch 97 excel
dont listen to them, easiest way is:
remove air intake box(3 nuts)
remove nuts surrounding the outer gearbox(about 6) and then remove the gearbox mounts
lower the gearbox and move slightly to the drivers-side. best to put a block or jack under it. then take the fly-wheel off(marking where it sits against the clutch kit)
and then pull the clutch plate off, making sure all fingers are not bent. i picked up a full clutch kit 2nd hand for 25$
Posted on Dec 10, 2009
Tips for a great answer:
May 04, 2009 | 1994 Hyundai Excel
Mar 24, 2009 | 1999 Hyundai Accent
Dec 01, 2008 | 1994 Hyundai Excel
Jun 22, 2008 | 1994 Hyundai Excel
14 people viewed this question
Usually answered in minutes!