Question about 1996 Chevrolet Blazer

1 Answer

Where is evap canister on 1996 chevy blazer 4.3 liter

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 95 Answers

Check up under the driver side body behind the rear wheel (left rear). It should be tucked up under the body. It should have 3 hoses connected to it, and is a black rectangular looking plastic box.

Posted on Oct 19, 2013

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 1996 Chevy Blazer check engine light on

More then likely its the Canister Purge Solenoid. you can find it online at www.autozone.com the part number is PV140. And to replace it on blazer you have to remove the spare tire. Alot of people don't know where this part is so I hope this helps you and good luck.

Posted on Oct 14, 2008

  • 66 Answers

SOURCE: firing order for 4.3 liter chevy blazer

1-6-5-4-3-2

Posted on Jun 25, 2009

  • 6 Answers

SOURCE: 1996 chevy blazer tire size

stock is generally the 235/75r15, but if you can find someone to install them or do it yourself easily be able to run 31x10r15 for a little meatier look, this would involve a slight trim of the front skirt edge on some models or depending on your suspension. Any tire shop would easily be able to tell you stock tires or what would fit, but most major retailers (walmart, fleetfarm) will not install ANY tire not listed as factory. so you would have to find a private shop then.

Posted on Sep 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 chevy blazer 4wd 4.6 liter evap code p0446? what is the problem?


P0446 Evaporative Emmission Control System Vent Control Circuit

Evap vent valve has only one purpose. It closes in order to seal the vent so the EVAP system can pressurize and ensure there are no leaks.

This code could mean one or more of these issues have happened:

Faulty vent valve
Open, short or excessive resistance on Vent valve control circuit

Blockage of vent valve

Bad PCM

Here are some things you can try:

Replace Vent valve

Repair open, short, or resistance problem in control circuit

Repair open, or short, or resistance problem in power circuit

Replace PCM

Oct 17, 2013 | 1996 Chevrolet Blazer

1 Answer

Emission failure on 2001 chevy blazer 4.3-


your vehicle has a vent valve solenoid located on the evap canister under the back end of the vehicle. You most likely have a bad vaccuum line going to the evap caniser. Have the vehicle smoke tested to verify. If no leaks are found replace the vent valve solenoid

Oct 25, 2012 | Chevrolet Blazer Cars & Trucks

1 Answer

EVAP system in chevy blazer


There are a number of videos on youtube for EVAP problems ! What wasthe CODE ! There are no codes for what you have listed

EVAP canister or hose cracked-not connected and the vaccum leak at engine.

Purge valve , vent valve , small leak , large leak .
Automotive Evaporative Emissions Part One

Wells EVAP Training with Sgt Tech P0440 P0441 P0442 etc Taking to a qualified repair shop that test's the system an replaces the only part needed . Testing not guessing

Mar 24, 2017 | Chevrolet Blazer Cars & Trucks

1 Answer

1996 pontiac firebird 5.7 liter engine light on po1441


Two choice dudes code there...

DTC P0441 - Evaporative Emission (EVAP) Control System Incorrect Purge Flow
EVAP emission canister purge is contolled by a valve which allows engine vacuum to pull stored fuel vapors from fuel tank into the engine to be burned, rather than be vented to atmosphere. A vacuum switch is used to detect when flow exists. If the PCM commands purge and sees that the switch is closed (indicating no detected purge flow) P0441 is set.
With a P0441 OBD-II trouble code, diagnosis can be tricky at times. Here are some things to try:
  • Common Chrysler fix - Replace Leak Detection Pump / LDP
  • Repair damaged EVAP lines or canister
  • Repair open or short in voltage feed circuit to Purge Solenoid
  • Repair open in PCM purge command circuit
  • Replace purge Solenoid
  • Replace vacuum switch
  • Repair restriction in Evap line or canister or soleniod
  • Repair resistance in purge connector
  • Replace PCM


DTC P1441 - Evaporative Emission (EVAP) System Flow During Non-Purge.
M
ost generally caused by a purge valve stuck open. the only way to diag for sure is with a gm tech 2 scan tool and a smoke machine. but if dont mind spending a few bucks as a good quess. Replace the purge valve.


Hope this helps.

Jul 28, 2011 | 1996 Pontiac Firebird

1 Answer

Where is the evap canister located on a 1997 chevy s10 blazer


The canaster it self is located on the drivers side rear of the wheel near the bumper has three hoses connecting to it 1 goes to the rollover valve on the fuell tank 1 to the canister vent solenoid on the member over the spare tire and the other 1 to the canister purge solenoid located on the mid left side of the intake manifold . What codes do you get ?

Jan 28, 2011 | 1997 Chevrolet Blazer

1 Answer

Were is the evap located on 2001 Chevy s-10 blazer with v6


The EVAP service port is located in the EVAP purge pipe between the EVAP purge solenoid and the EVAP canister. The service port is identified by a green colored cap.

47e8f38.jpg

Fig. Showing location of (1) Evaporative Emissions (EVAP) Canister Purge Solenoid and (2) Exhaust Gas Recirculation (EGR) Valve


4d7b3e9.jpg

Fig. EVAP Purge valve solenoid (3) mounting bolt (2) and insulator (1) on 2000-2005 4.8L, 5.3L, 6.0L Engines

Hope this help (remember rated the post).

Mar 26, 2010 | 2001 Chevrolet Blazer

1 Answer

What does code 446 mean on the 1996 Chevy Blazer?


P0446 = Evaporative Emission Control / System Vent Control Circuit Malfunction.

Check it, and before you replace the Evap Canister read this:

Subject: DTC P0446 (Restricted/Blocked EVAP Vent Path) Set, Service Engine Soon (SES) Lamp Illuminated (Replace Hose/Evaporative Emission (EVAP) Canister Vent Asm) #02-06-04-037A - (02/02/2005)
Models: 1999-2003 Chevrolet Silverado Models
1999-2003 GMC Sierra Models
--------------------------------------------------------------------------------
This bulletin is being revised to add model years. Please discard Corporate Bulletin Number 02-06-04-037 (Section 06 -- Engine/Propulsion System).
--------------------------------------------------------------------------------
Condition
Some customers whose vehicles are operated in dusty type environments, such as farming or mining off-road type applications, may comment about the illumination of the instrument panel SES light, with a DTC of P0446 (Restricted/Blocked EVAP Vent Path) being set.

Cause
Dirt and dust intrusion into the EVAP canister vent hose assembly, resulting in restricted air flow, may cause this condition.

Correction
After following the Service Manual diagnostic P0446 and determining that the EVAP canister vent valve is the cause of the SES light, replace the existing EVAP canister vent hose assembly with a new assembly, P/N 15086429. This new assembly has an enhanced filtering capability and a filter element that can be easily removed and cleaned. To ensure correct installation, follow the procedure below.

Raise the vehicle. Suitably support the vehicle.
Disconnect the EVAP canister vent valve electrical connector.
Disconnect the vent valve pipe at the EVAP canister.
Remove and retain the EVAP canister vent valve bracket mounting bolt.
Disengage, from the underbody, the two vent valve pipe clips securing the pipe to the underbody.
Remove and discard the complete EVAP canister vent hose assembly.
Position and secure the new assembly to the underbody using the existing hole and mounting bolt.
Tighten
Tighten the bracket mounting bolt to 12 N·m (106 lb in).

Install the two vent valve pipe clips into the existing underbody holes.
Connect the vent valve pipe to the EVAP canister.
Connect the EVAP canister vent valve electrical connector.
Lower the vehicle.
When properly installed, the new EVAP canister vent hose assembly will be positioned outboard of the original installation location. This new location provides clearance for accessing the filter element for cleaning purposes. To access the filter element, disengage the filter cover to valve locking finger by gently lifting the finger upward while simultaneously rotating the filter body clockwise. After approximately 45 degrees of rotation, the filter can be disengaged from the valve by gently pulling outward. The filter cover can then be removed and the filter element and body can be washed with soap and water. Prior to reinstalling, ensure that the body and filter element are dry.

Parts Information
Part Number 15086429 Hose Asm-Evap Emis Cnstr Vent

Hope help with this.

Mar 18, 2010 | 1996 Chevrolet Blazer

2 Answers

Describe your 1996 Ford Explorer Problem..trouble


Diagnostic Trouble Code (DTC) P0443 indicates a failure in the EVAP canister purge valve circuit.
Possible causes:
  • VPWR circuit open.
  • EVAP canister purge valve circuit open.
  • EVAP canister purge valve circuit shorted to PWR GND.
  • EVAP canister purge valve circuit shorted to VPWR.
  • Damaged EVAP canister purge valve.
  • Damaged PCM.

Jul 10, 2009 | 1996 Ford Explorer

1 Answer

1996 Toyota Previa code p0441


P0441 is Evap Emission Incorrect Purge Flow; the repair you are describing is easy, and should correct the P0441 restricition...I would anticipate no large problems.

Oct 07, 2008 | 1996 Toyota Previa

2 Answers

1996 Chevy Blazer check engine light on


More then likely its the Canister Purge Solenoid. you can find it online at www.autozone.com the part number is PV140. And to replace it on blazer you have to remove the spare tire. Alot of people don't know where this part is so I hope this helps you and good luck.

Oct 06, 2008 | 1996 Chevrolet Blazer

Not finding what you are looking for?
1996 Chevrolet Blazer Logo

305 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...