Question about Cars & Trucks

Open Question

Bad timing belt symptoms

Timing belt slip on ford focus 2.0 sohc

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 701 Answers

SOURCE: timing belt broke -2000 ford focus zx3

Hello mawbea: My name is Roger I will answer your question. You did not say which engine is in your car. So if you have a 2.0 SOHC engine. If the belt broke you should be Ok. If you have the 2.0 DOHC engine. The likely hood of bending the valves are just about a guarantee. How ever with any engine using a timing belt it is possible to bend a valve.Should you need more help please just ask.
Please rate the quality of your answer as this way we know you received helpful information.Thank You for using Fix Ya, Roger

Posted on Jul 08, 2009

Ad
  • 21 Answers

SOURCE: Focus timing belt replacement.

This is a very very easy timing belt setup. first off you have to remove the valve cover. Then you have to remove the serp belt. Then remove anything thats in your way of the front cover. after you remove the crank pulley re-install the crank bolt. DO NOT LOSEN THE BOLT FOR THE TENSIONER!!!! now spin the crankshaft until the sproket aligns with the timing mark. now at this point the two camshafts should be aligned. now there is a special tool from ford that holds the cam shafts in place. all it is is a 1/4" peice of metal that goes on the left side of the cam shafts to hold them into place. if you mark the cams you wont need the tool. or if you can find something to fit in the left side of the cams that will work too. anyways after that its just the same steps in reverse. very easy to do.

Posted on Aug 31, 2009

  • 122 Answers

SOURCE: need cylinder head gasket torque specs.

looks like there is special sequence to reassemble and tightening, a quick note replace any bolts that have two punch marks.tighten as follows: x x x x x 10 4 2 6 8 x x x x x 7 5 1 3 9 torque all down to 15 ft lbs torque to 30 ft lbs plus 90 degrees. Good luck!

Posted on Sep 18, 2009

kirkx
  • 2019 Answers

SOURCE: whats the torque specs on a 2001 ford focus 2.0

You need to buy the manual, because you also need to know the order in which to torque them.
http://www.car-stuff.com/mmparts/ford-focus/repair_manual.html
usually you start at the middle and circle outward.
But they can differ. Some cars you always need to put in new head bolts. Others are done in several stages. This is too critical to take chances on.
If you really can't afford $19 for a manual, go to the library and xerox the pages.

Posted on Feb 09, 2010

BCAS1298
  • 3092 Answers

SOURCE: setting timing belt 2.0 split port focus engine

Hope this helps.

39fe2de.gif

Posted on Jul 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the fuel pump pressure for a 1990 geo storm 2+2


storm what engine? 4xe1 or 4xf1 SOHC or DOHC (twin cam)?
its really an Isuzu Impulse in snack skins (badges)
does test fuel run engine? that is step 2.
if the cam timing belt slips, the DOHC goes boom.
the SOHC engine belt slip,cause no starts, due to huge
compression drop, and fails the test fuel tests.

SOHC, keyon, 30-46PSI
same for both. engines
but as all mPI engines it drop running at idle.
and rises at WOT> (FPR actions most work right running) ask
but its no running
ever do a 60,000 interval tuneup with a new cam belt.
no?

Feb 12, 2015 | 1990 Geo Storm

1 Answer

How much it will cost to replace a timing belt on a 200 ford focus, it was a SOHC non-interferance engine


Maria you will have to get a few quotes from repair shops but it is a costly repair.

Mar 07, 2014 | 2000 Ford Focus

1 Answer

2004 ford focus 16v zetec timing belt or timing chain?


Here there are 3 engines:

2.0 L. L4 DOHC >>>Timing Belt
2.0 L. L4 SOHC >>>Timing Belt
2.3 L. L4 DOHC >>>Timing Chain


Mai

Mar 29, 2013 | 2004 Ford Focus

1 Answer

I have a 2001 ford focus zx3. About 2 days ago it seemed the transmission was slipping and was shifting from 1st to.2nd very hard and delayed. Now, its a miracle to get the car over 20 mph. I constantly...


Sounds like you have a bad seal in your transmission. Its not terribly hard to fix, but unfortunately it is time consuming because the transmission must be removed. If you have the DOHC (Zetec) engine then it might be worth fixing. If you have the SOHC engine...don't bother. Sell it for parts; a good SOHC engine can fetch as much as $1,200.

Feb 03, 2011 | 2001 Ford Focus

1 Answer

Ford Focus belts


timing belt, and drive belt. the timing belt needs special tools to replace, if its a 2.0 DOHC VIN "P" 8th digit. if its a VIN "3" SOHC no special tools are needed

Oct 21, 2009 | 2001 Ford Focus

1 Answer

The timing belt on a ford focus 1.6cc on a 2004 plate


In the Timing Belt and Serpentine Belt calagogue dont have 1.6L, only for 2.0L and 2.4L; maybe this can help you.


2004 Ford Focus 4-Cyl. 2.0 L


Timing Component Kit; W/DOHC Eng.; W/1-Idler Pulley

00b2a20.jpg


Timing Component Kit; W/DOHC Eng.; W/2-Idler Pulleys

c721678.jpg


Timing Component Kit; W/SOHC Eng.

f3dd0be.jpg



I hope help you with this. Good luck.

Sep 15, 2009 | 2004 Ford Focus

1 Answer

Diagram 2001 Focus timing belt installation


2001 Ford Focus 4-Cyl. 2.0 L

Serpentine; W/DOHC Eng.; W/A.C.

a4e447b.jpg

Serpentine; W/DOHC Eng.; W/O A.C.

a7b68af.jpg


Serpentine; W/SOHC Eng.; W/A.C.
6b09af4.jpg


Serpentine; W/SOHC Eng.; W/O A.C.
faaac9c.jpg


For more details about the
Timing Belts & Components, visit HERE.

Good luck (remember rated this help).

Sep 14, 2009 | Ford Focus Cars & Trucks

1 Answer

Timing belt broke -2000 ford focus zx3


Hello mawbea: My name is Roger I will answer your question. You did not say which engine is in your car. So if you have a 2.0 SOHC engine. If the belt broke you should be Ok. If you have the 2.0 DOHC engine. The likely hood of bending the valves are just about a guarantee. How ever with any engine using a timing belt it is possible to bend a valve.Should you need more help please just ask.
Please rate the quality of your answer as this way we know you received helpful information.Thank You for using Fix Ya, Roger

Jul 08, 2009 | 2000 Ford Focus

2 Answers

Try to start my 2001 ford focus want start everything else works the lights the radio etc


i have replaced coil pack. wires plugs on a 2000 2.0 sohc ford focus..and it still has no fire.... motor just turns over.. 99'000 miles i had the timing belt and all replaced about 10'000 miles ago at ford dealer ship.... what might be my problem now crank sensor??? all fuses i checked they are all good.... it just spins no fire to plugs so it seems...

Dec 14, 2008 | 2001 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...