Question about Hyundai Cars & Trucks

Open Question

Removing dash i need to replace my glove box or multi box on a Hyundai elantra 2007,i hace the part..but I can not find how to remove the old one..

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 840 Answers

SOURCE: Remove door trim to replace power window switch

you dont have to take the trrim off on this car look at the outline of the switch open from rear and pull forward then you can change the window switch/ Please rate my response thank you very much

Posted on Feb 01, 2009

Ad
emjem74
  • 162 Answers

SOURCE: Need to replace the radio/cd player in my 2001 elantra

on the hyundai you will usaually see four small holes two either side of the radio unit itself. if you take 4 allen keys/hex keys and insert all at the same time making sure to keep them very straight the stereo unit shuld then be free to pull out. you will then find that it has a universal plug on the back of it and you should be able to plug and play with that. if wrong size/type of plug then buy a convertor from motor discount store.

Posted on Feb 25, 2009

SOURCE: 2006 Hyundai Sonata 3.3 engine - cabin filter replacement

It should be the same general procedure as the 02. Open Glove box and remove contents. Remove glove box stops and or glove box shock on side. With the glove box swung out of the way remove the panel that covers the air filter. Remove and replace filter. Reinstall cover, and glove box stops.

Posted on May 10, 2009

frcs68
  • 1605 Answers

SOURCE: Replacing passenger side mirror on 2004 Hyundai Elantra.

tools:
philip head screw driver,
flat head screw driver
metric socket std and deep.
rachet metric or 3/8 driver with a adaptor.
socket extension.
lower the windows.
look for small plastic cover on the door handle and door pull, pop the cover with a samll flat head screw and loosen the screws with philip head screw driver.
pull the in side panel from the button of the door panel with the help of screw driver and along the sides.
push the inside panel up wards to clear the glass. and disconnect any of the electric wiring. and left the panel out of the way.
take the window switch from the door pnael and roll up the windows.
peel down th inside water seal.
you should be able to get to the mounting screws for the mirror.

Posted on May 13, 2009

  • 94 Answers

SOURCE: How to replace 2004 Hyundai Elantra starter

First, disconnect the battery. Then the only part that needs to be removed to access the starter is the rubber air plenum boot between the throttle body and the air filter housing. This allows enough room to get an arm in there to access the 14mm bolts that attach the starter to the transmission. After removing the bolts, the starter can be removed from underneath the car. lower it down as much as possible, and unbolt the power cable. You may have to twist and turn it a bit to get around the support between the engine block and intake manifold, but it will come out.

Posted on Feb 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Front windshield wiper will not turn off


Turn engine off, remove and or replace fuse; in fuse box.

You may need to consult the manual for the location of the fuse box, it is either under the blood at the passenger side under or inside the glove box or at the right of the drivers side.

Mar 04, 2015 | 2005 Hyundai Elantra

1 Answer

I need a fusebox diagram for 2007 Hyundai Elantra


if you bought the car new or used then check the glove box to see it the owners manual is there. it will show you which fuse works what and the size of the fuse to use.

May 21, 2014 | 2001 Hyundai Elantra

1 Answer

Where is the fuse box for my 2007 Hyunda Elantra and what Number is it to replace it for no dash lights?


the fuse box is almost located in the sane spots on all cars 1. under drivers dash by E-brake cable. 2. on drivers lower dash around were your left knee is. 3. on the end of the drivers dash where the door panel touches it. 4. on the end of the passengers dash where the door panel meets it. 5. under the hood in a black plastic box, which will say fuses & relays on it. Then there is one other place on the passegers side of the center consule by where your left foot goes.

May 21, 2014 | 2007 Hyundai Elantra Limited Sedan

1 Answer

How do I change the cabin air filter in a 2009 Hyundai Elantra?


take out the gloves box,remove the lock to the filter cover and pull the air filter replace it with new. fix the cover n gloves box.

Mar 11, 2012 | 2009 Hyundai Elantra

1 Answer

How can I chage the A/C filter on Accent 2007?


Remove the Phillips-head screws and the 10mm bolts that attach the glove box insert to the dash. Pull the release tabs on the glove box door travel stops and release the glove box door from the glove box. Slide the glove box insert out. Remove the lower dash trim panel on the passenger side of the dashboard.Remove the old HEPA filter by depressing the locking tabs on the filter cover located on the front of the plastic evaporator case located directly behind the glove box. Then slide the filter carefully, out and down, to prevent knocking the dust that has been captured by the filter into the evaporator case or onto the carpet.Install the new filter by sliding the new filter into the evaporator case. The new filter is labeled to indicate the direction it should be installed into the evaporator. Push it completely into the case, and close the cover until the latches snap into place.Reinstall the glove box insert and attach it to the dashboard using the original screws and bolts. Insert the door travel stops into their slots and push the door closed. The stops will automatically snap into place. Reinstall the lower dashboard trim to complete the project.

Jun 04, 2010 | 2000 Hyundai Accent

1 Answer

How do you change the cabin air filter in a 2009 Hyundai Sonata?


I just did this on our 2007 Sonata. 1. open the glove box. On both sides of the glove box, there is a black tab which prevents the glove box from opening to far. The Chilton manual says to remove these, but that is more difficult then simply pressing inward on the sides of the glove box to release them from the channel. Now the glove box should open even more. Next, remove the piston arm from the right side of the glove box. You can do this by removing the panel on the side of the dash, but you first need to open the passenger door. You can also just use a screwdriver or other tool to slip the piston of without removing the dash side panel. Now with the glove box hanging fully open, you can see the cabin filter box. There are tabs on both sides of the front that you simply press together in order to slide the filter out of the box. This whole process from beginning to end should only take about 10 minutes and is very simple.

Dec 23, 2009 | 2009 Hyundai Sonata

1 Answer

How do I replace the dash board lights in a 2002 Hyundai Santa fe? Also How do I replace the Cabin Air filter?


To change the cabin air filter one needs to remove the glove box first. This is reasonably simple and involves a couple of screws, the rubber glove box limit pads, and a 10mm nut. The air filter is located in the heater assembly directly behind the glove box. The filter is removed by releasing the plastic clip holding the filter and withdrawing the filter forwards. (The filter is installed like a vertical drawer.). The Hyundai web site (www.hmaservice.com) has a good description.
For a 2002, you simply slip the black ring off of the glove box clip on the right, and pull the left side of the glove box in slightly so the rubber glove box limit pad will clear it's channel. That allows the glove box to open forward and gives access to the heater assembly directly behind the glove box. The air filter holder is held in place by four plastic clips that you squeeze together in pairs to release the holder. Pull it out like a drawer. Remove the old filter by squeezing the top and bottom (or front and back, depending on how you hold it) of the filter together. This will bow the white plastic sides of the filter so that they clear the four small, black plastic protrusions from the sides of the holder that keep the filter in place. Reverse the process with the new filter and you are done. Takes about 10 minutes.

Nov 30, 2009 | 2002 Hyundai Santa Fe

1 Answer

Where is the cabin air filter located on an 07 Hyundai Tiburon?


The cabin filter is located behind the glove box.

Remove the three screws along the bottom edge of the glove box door.

Open the glove box door and remove the three screws along the top edge just inside where the door closes.

Pull the glove box assembly out and you will see the cabin filter cover behind it. It is a (approx.) 1.5"x10" plastic plate that snaps out.

Remove the cabin filter cover and slide the old filter out, noting the orientation. Install the new filter in the same orientation then reassemble the vehicle.

Sep 20, 2009 | 2007 Hyundai Tiburon

1 Answer

2006 Hyundai Sonata 3.3 engine - cabin filter replacement


It should be the same general procedure as the 02. Open Glove box and remove contents. Remove glove box stops and or glove box shock on side. With the glove box swung out of the way remove the panel that covers the air filter. Remove and replace filter. Reinstall cover, and glove box stops.

May 10, 2009 | 2006 Hyundai Sonata

1 Answer

Hyundai Veracruz cabin air filter


the filter is behind the glove box. pull the 2 clips on both sides of glove box. then remove glove box. the filter cover should be right there and just unclip the cover and replace filter.

Jan 19, 2009 | 2008 Hyundai Veracruz

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8575 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...