Question about 2004 Mazda Tribute

Open Question

2004 Mazda tribute 3.0L main bearing torque - 2004 Mazda Tribute

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
johnjohn2
  • 5763 Answers

SOURCE: 2004 mazda 6 3.0L V6

Okay, the main bearing caps only have 10 bolts, i think your looking for the connecting rod caps, they have 16 bolts, i will list them both, theres a tightening sequnce for the main bearing caps, these are the caps that hold the crankshaft to the engine block, the connecting rod caps hold the pistons to the crank and they have 16 nuts,For a 2004 mazda 6 with the 3.0 engine the torque specs are as follows.
Connecting rod bolts step 1) 19.2 - 23.6 ft lbs.
step 2) tighten an additional 80 - 100 degrees

Main bearing caps step 1) 32.5 - 33.9 ft. lbs.
step 2) tighten an additional 175 -185 degrees.
heres a diagram for main caps to tighten in order.
hope this is helpful.fc3bff9.gif

Posted on Aug 20, 2010

Ad
jackiaria
  • 350 Answers

SOURCE: mazda tribute 2004

Sounds like maybe your alternator's going
Get to an auto parts store and have them check your alternator and battery usually for free....Advanced Auto Parts does this for me free.

Posted on Feb 08, 2009

  • 1 Answer

SOURCE: air bag light on and off on a 04 tribute

had the same prob on mine underneath the front seats are seat belt tensioner plugs 1 under driver and 1 under pass. seat unplug them and plug them back in , i found this solution on this site somewhere and it worked saved me a lot of money, almost took it to the dealer

Posted on Mar 27, 2009

ZJLimited
  • 17970 Answers

SOURCE: need a pic of firing

For 2004 Mazda Tribute 4WD 3.0 liter DOHC V-6 check...

zjlimited_61.gif


Hope this helps (remember to rate thsi asnwer) TY for using Fixya.

Posted on Dec 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 mazda trubute won't start and i replace 40amp and got it work and it drive for a while and then it blow again


Mazda Tribute Questions - CarGurus

www.cargurus.com > Questions > Mazda

CarGurus2001 Mazda Tribute 3.0 Wont Start. out shopping one ... 0. Report. rebel54 asked a2005 Mazda Tribute i Maintenance & Repair question about a month ago ...

Tribute won't start - Mazda Forum - Mazda Enthusiast Forums

www.mazdaforum.com > ... > Mazda Vehicles > Mazda Tribute
May 22, 2007 - I have a 2002 Mazda Tribute V6. On Sunday it wouldn't start. ... 2005Tribute won't start! rizakag, Mazda Tribute, 4, 03-27-2006 09:29 AM ...
Why does my fuse in my 2005 mazda tribute keeps blowing ...www.cargurus.com > Questions > Mazda > TributeCarGurusSep 4, 2014 - Why does my fuse in my 2005 mazda tribute keeps blowing when I try to switch gears?Electrical problem - 2004 Mazda Tribute - RepairPalrepairpal.com > Questions > Mazda > Tribute > 2004 Mazda TributeApr 5, 2011 - Electrical problem on 2004 Mazda Tribute ... meter on the battery cable note the battery draw then remove fuses one at a ... 2005 Mazda Tribute.2005 Mazda Tribute, Fuse #3 Blows, No Tail Lightswww.sparkys-answers.com/.../2005-mazda-tribute-fuse-3-blows-no-tail.h...

Jan 30, 2016 | 2005 Mazda Tribute

1 Answer

What size battery is needed for 2004 mazda tribute


Mazda Tribute Batteries - AutoZone

www.autozone.com/1/categories/mazda-tribute-batteries

AutoZoneProducts 1 - 6 of 6 - Mazda Tribute Batteries including Battery - Optima (35), Battery... vehicle s original Cold Cranking Amps and Reserve Capacity requirements.

Nov 15, 2015 | 2004 Mazda Tribute 3.0

1 Answer

Mazda tribute catalytic converter


3 converters ; 2 are part of the exhaust manifolds,and one on of the main exhaust pipe

Apr 02, 2014 | 2004 Mazda Tribute

1 Answer

What are mazda 6 wheel bearing torque specification


What is the front axle torque on a 2004 Mazda 6

Mar 17, 2012 | 2004 Mazda 6

1 Answer

Need firing order diagram 2004 tribute


2004 Mazda Tribute 3.0 liter DOHC V-6

zjlimited_46.gif


2004 Mazda Tribute 2.0 liter DOHC L4

zjlimited_45.gif



Hope this hgelps (remember to rate this answer).

Nov 09, 2010 | 2002 Mazda Tribute

1 Answer

2004 mazda 6 3.0L V6 main bearing caps(bootom end) has 16 bolts need torgue specs please!


Okay, the main bearing caps only have 10 bolts, i think your looking for the connecting rod caps, they have 16 bolts, i will list them both, theres a tightening sequnce for the main bearing caps, these are the caps that hold the crankshaft to the engine block, the connecting rod caps hold the pistons to the crank and they have 16 nuts,For a 2004 mazda 6 with the 3.0 engine the torque specs are as follows.
Connecting rod bolts step 1) 19.2 - 23.6 ft lbs.
step 2) tighten an additional 80 - 100 degrees

Main bearing caps step 1) 32.5 - 33.9 ft. lbs.
step 2) tighten an additional 175 -185 degrees.
heres a diagram for main caps to tighten in order.
hope this is helpful.fc3bff9.gif

Aug 20, 2010 | 2003 Mazda Mazda6

1 Answer

2003 mazda 6 3.0 need the main bearing torque specs


I'm sending you the torque specifications for your main bearings and also your head bolts. I also sent you main bearing and cylinder head tightening sequence. I hope this will be useful2c713bf.giffce6623.gif
Main Bearings Torque specs. 40-43 Ft. Lbs.
Cylinder Head Torque specs. 56-60 Ft. Lbs.

Oct 05, 2009 | 2003 Mazda Mazda6

1 Answer

Loud whining noise on left turn (Mazda Tribute 04)


sounds like a wheel bearing maybe faulty from your text it sounds like it could be the osf you could try jacking vehicle up with engine off handbrake applied and in neutral spin the wheel and see if it makes noise or wiggle it to see if it has any play possibly take off greade cap and see if any grease in bearing /

Aug 20, 2009 | 2004 Mazda Tribute

Not finding what you are looking for?
2004 Mazda Tribute Logo

Related Topics:

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8759 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...