Question about Chevrolet Cars & Trucks
I have blinker lights but when you pull out the switch I have no running lights or headlights
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: fuse box diagram
Look in the owners manual. Or if you don't have one of those then get one here. https://www.fleet.ford.com/maintenance/owners_manuals/default.asp
Could also be the MFS turn signal switch. Do the 4 way flashers work? They use the same circuit and flasher but are switched from a separate source. If so it is for sure the MFS.
Posted on Jul 26, 2008
SOURCE: headlights flicker all the time
Hi, my name is ricky and im 24 yrs old and from Bronx, N.Y . I bought my 03 impala in 04 and i had the same problem in 2007 in which that clicking noise happens. The headlights flicker, and even the gauges inside the car would flicker at times. It has nothing to do with fuses or a relay, please dont spend money on that b.s. like i did..lol I will try my best to explain what i did so that you can save some money and time. READ EVERYTHING AND USE ADVICE AT YOUR OWN RISK.
1st of all - I went to a junk yard/auto salvage yard to find a USED part that i needed. Often there are good parts from cars that have been totalled.
2nd- What i asked for was a Body Control Module. This controls most of the electric issues you are having and costed me about 50 dollars compared to a new one that was over $200 and reached up to $500.
3rd- I went head first under the steering column and found where the BCM was located. Poke around to find it cause it is def. there, hidden well. It doesnt take special skill to remove it or find it.
4th-Replace the BCM, but be advised that after you do this, your car might not crank over.My car did crank over because i installed a automatic starter previously so i could have started it with the remote start.
5th- you MUST take the car to a chevy shop so they can Program your car to the body control module this costed me about $250.
All together this information has to help you in someway.
If you have further questions or would like to make a comment, then e-mail me at " email@example.com "
I hope this helps...im not saying it is a 100 percent guarantee for you, but i had this same problem recently and this was the answer to my problem. By the way, never buy a american car again or a GM product for that matter...Kudos
Posted on Dec 19, 2008
I have had this happen and it is rare, but I have had a filiment burn out in a two filment buld and short to the other filiment. It does happen and I think this might be your problem, the only way to find it is a visual inspection of each bulb. I am sure many people will think this is crazy, but I have had the exact same problem, I had the schematics, tested the circuits,etc. and them by accident found a stop/blinker 1157 bulb that had done this exact thing. I hope this helps you, check the bulbs in your headlights also.
Posted on Dec 27, 2008
With electrical problems I always look for a bad ground wire, especially on older vehicles. Look for any wire that goes to an inner fender or the engine, there maybe a faulty relay in the circuit too. good luck, Chuck
Posted on Mar 17, 2009
Tips for a great answer:
Sep 01, 2013 | 1990 Ford Mustang
May 03, 2013 | 2005 Nissan Frontier
Feb 19, 2013 | Cars & Trucks
May 19, 2011 | 2007 Jeep Grand Cherokee Overland
Apr 26, 2010 | 2001 Chevrolet Silverado 2500HD
Sep 09, 2009 | Ford Mustang Cars & Trucks
Jul 09, 2009 | Nissan Altima Cars & Trucks
Jun 28, 2009 | 1988 Honda Accord 4 Door
87 people viewed this question
Usually answered in minutes!