Question about 1998 Dodge Intrepid

Open Question

How do i remove a push rod from a dodge intrepid?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

old marine
  • 1921 Answers

SOURCE: tie rods

I did this on a 2002 Intrepid, and found that it wasn't too complicated. I replaced the bushings only, rather than the tie rod end. You can get bushing replacement kits where the bushing is in two pieces and doesn't have to be pressed in. Before starting, turn the steering all the way to the right, then remove the intake air ducting. The rack and pinion assembly should be easily accessible now. BE SURE AND REPLACE ONLY ONE TIE ROD BUSHING AT A TIME. If you take both bolts out at the same time, you may have a very hard time getting all the sleeves, etc. aligned in the steering unit so you can get the bolt back in the proper hole.

Posted on Dec 10, 2008

  • 1596 Answers

SOURCE: 1997 dodge Intrepid: inner tie rod

To Steering Gear Bolt 90 Nm (66 ft. lbs.) Jam Nut 75 Nm (55 ft. lbs.)
NUMBER: 19-001-01
GROUP: Steering
DATE: Mar. 23, 2001
THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN 19-003-00 REV A, DATED OCTOBER 6, 2000 WHICH SHOULD BE REMOVED FROM YOUR FILES. ALL REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDE PART NUMBER CHANGES AND ADDITIONAL MODEL YEAR.
WARNING: FAILURE TO ACHIEVE A MINIMUM TORQUE OF 100 NM (74 FT. LBS.) MAY RESULT IN THE ATTACHING BOLTS LOOSENING AND FRACTURING. THIS COULD RESULT IN A SUBSEQUENT LOSS OF STEERING CONTROL. BENDING THE RETAINING TABS ALONE WILL NOT PREVENT THIS.

SUBJECT:
Loose Steering

OVERVIEW:
This bulletin provides service procedures and parts information for the inner tie rod bushings.
MODELS:
1993 - **2001 ** (LH) Concorde/Intrepid/LHS/New Yorker/Vision/300M
SYMPTOM/CONDITION:
Loose feel or clunk in the steering wheel as the wheel is moved from side to side.
DIAGNOSIS:
Observe the inner tie rod to steering gear attaching point while moving the steering wheel from side to side. If there is movement between the gear and inner tie rod, perform the Repair Procedure. If no movement is evident further diagnosis of the condition will be required.
DISCUSSION:
The inner tie rod bushings have previously been serviced with the tie rod assembly. This bulletin releases the parts, service procedures, and special tool necessary to service just the bushings. Subsequent service manuals will contain the Repair Procedure.

Posted on Jan 13, 2009

  • 1 Answer

SOURCE: locked keys inside of 2000 dodge intrepid

If you have the master key,put it in the drivers door and turn anti-clockwise.If you cannot turn the key by hand,then apply some pliers to the key and ease the key to unlock.
If this does not work,place some padding below the key entry on the drivers door and hit one sharp blow with a rubber hammer or similar and the system should open the central locking system.

Posted on Apr 06, 2009

BPALepine
  • 61 Answers

SOURCE: 99 dodge intrepid specs

Inner main bearing cap bolts:
Torque to 15 ft-lbs, then rotate an additional 1/4 turn

Outer main (windage tray) bearing cap bolts:
Torque to 20 ft-lbs, then rotate an additional 1/4 turn

Main bearing cap cross bolts:
Torque to 250 in-lbs or 20.83 ft-lbs

Connecting road bearing cap nuts:
Torque to 20 ft-lbs, then rotate an additional 1/4 turn

Posted on Apr 22, 2009

polarcycle
  • 1392 Answers

SOURCE: tie rod

No. Go to Napa, get the bushing repair kit. Turn the steering wheel all the way to the right. Remove the air inlet tube. Should be 2 7/8" bolts retaining the inner tie rod ends. Loosen both. Remove one at a time, replace bushing with kit. Use some synthetic brake grease on the bushings. I recommend Napa sylglide. Replace the bolt, but do not tighten all the way. Do the other the same way. Tightnen both bolts, reinstall the air inlet tube, get vehicle aligned.

Posted on Jul 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you replace pit arm bushing in a 2004 dodge intrepid


Well it's a bit tuff , if I remember your air cleaner tubes got to come out, there is a lock that is between the two bolts , do one at a time , much easier, unhook outer tie rod remove the bolt for that side then remove it from wheel well , change bushing install then do other side

Sep 03, 2014 | 2004 Dodge Intrepid

2 Answers

I also have a 1995 Dodge Intrepid with bad tie rods; I have purchased the parts, but I am having trouble removing the INNER tie rods. There is something preventing me from putting a wrench on the bolt


There is a special tool to remove inner tie rod. You usually can rent this from a Autozone parts store. When you return the tool, they give you back 100% your money as long as you don't damage the tool.
It consists of a long pipe with a open end wrench at the end.

Aug 16, 2014 | 1995 Dodge Intrepid

1 Answer

Push rods.. 2 of them sit higher and cant get the rocker arm bar back on.. How do you get them to line up?


car and engine type? some 3.1 liter gm cars push rods are different lenght for exhaust and intake you might have them in wrong holes

Sep 21, 2013 | 1997 Dodge Intrepid

1 Answer

Change out both tie rods. now it will not turn left.


Hello and welcome to FixYa!
Replacing tie rods may need tie rod adjustments. It may be on max out setting that's why it won't push the wheel. Try to adjust it and observe how it goes.
Hope this helps and thank you for using FixYa! Have a good one!

Jul 12, 2011 | 1995 Dodge Intrepid

1 Answer

I hsve a 19999 dodge intrepid and my gear selector broke off at he base how do i repair this


gear selector? you dont mean the shift knob?
or do you mean the gear stem that the shift knob sits on?
in any event that is a item that you need to go to you nearest junk yard find a intrepid ( should find a few) lol, remove the housing that it rest in, pull the metal plate screws away remove the clips that hold the shifting rod in place take home install the opposite of install

or drive to a nearest shop

Oct 19, 2009 | 1999 Dodge Intrepid

2 Answers

Tie rod


No. Go to Napa, get the bushing repair kit. Turn the steering wheel all the way to the right. Remove the air inlet tube. Should be 2 7/8" bolts retaining the inner tie rod ends. Loosen both. Remove one at a time, replace bushing with kit. Use some synthetic brake grease on the bushings. I recommend Napa sylglide. Replace the bolt, but do not tighten all the way. Do the other the same way. Tightnen both bolts, reinstall the air inlet tube, get vehicle aligned.

Jul 22, 2009 | 2002 Dodge Intrepid

2 Answers

99 dodge intrepid specs


Inner main bearing cap bolts:
Torque to 15 ft-lbs, then rotate an additional 1/4 turn

Outer main (windage tray) bearing cap bolts:
Torque to 20 ft-lbs, then rotate an additional 1/4 turn

Main bearing cap cross bolts:
Torque to 250 in-lbs or 20.83 ft-lbs

Connecting road bearing cap nuts:
Torque to 20 ft-lbs, then rotate an additional 1/4 turn

Apr 21, 2009 | 1999 Dodge Intrepid

2 Answers

1997 dodge Intrepid: inner tie rod


To Steering Gear Bolt 90 Nm (66 ft. lbs.) Jam Nut 75 Nm (55 ft. lbs.)
NUMBER: 19-001-01
GROUP: Steering
DATE: Mar. 23, 2001
THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN 19-003-00 REV A, DATED OCTOBER 6, 2000 WHICH SHOULD BE REMOVED FROM YOUR FILES. ALL REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDE PART NUMBER CHANGES AND ADDITIONAL MODEL YEAR.
WARNING: FAILURE TO ACHIEVE A MINIMUM TORQUE OF 100 NM (74 FT. LBS.) MAY RESULT IN THE ATTACHING BOLTS LOOSENING AND FRACTURING. THIS COULD RESULT IN A SUBSEQUENT LOSS OF STEERING CONTROL. BENDING THE RETAINING TABS ALONE WILL NOT PREVENT THIS.

SUBJECT:
Loose Steering

OVERVIEW:
This bulletin provides service procedures and parts information for the inner tie rod bushings.
MODELS:
1993 - **2001 ** (LH) Concorde/Intrepid/LHS/New Yorker/Vision/300M
SYMPTOM/CONDITION:
Loose feel or clunk in the steering wheel as the wheel is moved from side to side.
DIAGNOSIS:
Observe the inner tie rod to steering gear attaching point while moving the steering wheel from side to side. If there is movement between the gear and inner tie rod, perform the Repair Procedure. If no movement is evident further diagnosis of the condition will be required.
DISCUSSION:
The inner tie rod bushings have previously been serviced with the tie rod assembly. This bulletin releases the parts, service procedures, and special tool necessary to service just the bushings. Subsequent service manuals will contain the Repair Procedure.

Jan 13, 2009 | 1994 Dodge Intrepid

1 Answer

Tie rods


I did this on a 2002 Intrepid, and found that it wasn't too complicated. I replaced the bushings only, rather than the tie rod end. You can get bushing replacement kits where the bushing is in two pieces and doesn't have to be pressed in. Before starting, turn the steering all the way to the right, then remove the intake air ducting. The rack and pinion assembly should be easily accessible now. BE SURE AND REPLACE ONLY ONE TIE ROD BUSHING AT A TIME. If you take both bolts out at the same time, you may have a very hard time getting all the sleeves, etc. aligned in the steering unit so you can get the bolt back in the proper hole.

Jul 03, 2008 | 2000 Dodge Intrepid

Not finding what you are looking for?
1998 Dodge Intrepid Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...