Question about 1997 Jeep Grand Cherokee
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
i am a chrysler jeep tech. at a dealership i have seen alot of this in these jeeps 90% of the time the problem is between the driver door and the body open the door there is a rubber tube with wires inside, diconnect this ruber tube from the door pull it back and i would almost promise you will find some broken wires just strip them connect them buy colors solder them together and tape them up and your windows and or door locks will work like new
Posted on Aug 07, 2008
I have a 2000 Jeep Grand Cherokee the power windows,power seat , door would not lock , and the inside lights would stay one ..i thought it was a fuse problem but no fuses for that ... in the rubber boot between the door and frame ..the was the ground wire was split ... put a **** connector on it everything works great now ....
Posted on Aug 25, 2008
This seems to be the affects of a bad dinamo charging your battery . If you take a appart the dinamo you should fine a part called in mechanic terms "the bones" they look like 2 black magnets with a wire coming out of them . They are not expencive and you should not change your dinamo untill you try this first a car dinamo is very expencive .
Posted on Jan 21, 2009
One long bolt at the top - requires a 7mm socket to remove the bolt. The light housing will pry out with a screw driver. There are three ball and socket type connectors that hold the housing in and I just pryed off the plastic housing carefully and "balls" pop out of the sockets. Finally, I was replacing the faded plastic housing and it came with a new wiring harness. It's impossible to reach the connector to use the new wiring harness that comes with the new plastic light housing. So just use the existing wiring harness with the new light assembly.
Posted on Feb 06, 2009
If you have the same pulley arrangement that most 4.0 engines have that pulley is an idler not a tensioner. Your power steering pump has a pivot bolt, and a slide under the pump. You adjust belt tension using the pump.
Posted on Apr 05, 2009
Tips for a great answer:
Oct 09, 2014 | 2000 Jeep Grand Cherokee Laredo
Jun 15, 2017 | 2000 Jeep Grand Cherokee Laredo
Feb 15, 2012 | Jeep Grand Cherokee Cars & Trucks
Sep 28, 2011 | 2000 Jeep Grand Cherokee
Jul 01, 2011 | 2000 Jeep Grand Cherokee
May 10, 2010 | 2000 Jeep Grand Cherokee
Sep 18, 2009 | 2000 Jeep Grand Cherokee
Dec 19, 2008 | 2000 Jeep Grand Cherokee
Jul 18, 2008 | 1996 Jeep Grand Cherokee
204 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: