Question about 2005 Hyundai Santa Fe GLS

1 Answer

My hyundai sata fe 2005. was driving and sudenly lost all gears. no warning. foward and reverse. puleed to side of road. shut off checked for leaks none. turned back on drove fine for a few hundred feet. then did same thing. and will do the same each time i shut off. and restart. has neutrol and park always and is not noisy. just seems to lose power to transmission. only thig else is exhaust emission symbol came on about the same time

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 45 Answers

Some vehicles are made with built in safety features to either not allow the vehicle to start or move if something serious is wrong. Don't know about the exhaust emission but could be in computer software to disable in case of excess emission. Could just be a bad O2 sensor. Need to fix the emission code problem, reboot the computer and try again.

Posted on Jul 04, 2017

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: transmission on my 2001 Hyundai Elantra GLS

your shifts correctly, as your driving it downshifts and stay stuck at that gear when u stop and try to take off but intell u turn off your car and restart it it shifts correctly intell a few mins later. i am thinking that is a speed sensor (out signal problem) mounted on top of your transmission next to the battery tray, you will see couple of cable linkages next to it ...

Posted on Nov 03, 2008

  • 134 Answers

SOURCE: Hyundai Santa Fe 2005 won't shift into first gear

Most likely the o-ring seal between the torque converter and the transmission is going bad. Get that transmission rebuilt pronto before serious damage is done! But first, have a mechanic drop the transmission pan and look for signs of a very thin silvery film coating the inside of the pan. If found, then the transmission definitely will have to be rebuilt, and the torque converter will also have to be replaced since embedded metallic particles in the old torque converter will eventually come loose, due to wear of the clutch plates within the torque converter, and eat up the rebuilt transmission. Now, here is the deal once the transmission has been rebuilt:

Change the transmission fluid and filter once a year -- no matter what! If you do this, then you should never have any more problems with the transmission.

Posted on Apr 20, 2009

ghost4548
  • 776 Answers

SOURCE: hyundai excel 1996 automatic will engage reverse

It appears you have a Forward Clutch FAILURE. Replace the trans after you get it diagnosed and verified by a professional technician. By the way, do you have a Check Engine light? If so, what is the diagnostic code? The dealership can scan the system and find any codes which may have been stored in the TCM (Transmission Control Module). If there were any 'Incorrect Gear Ratio" codes, it's most probably the trans itself.

Posted on May 28, 2009

  • 750 Answers

SOURCE: Transmission: Reverse

check power going to reverse shift solynoid and check neutral switch

Posted on Sep 25, 2009

  • 1 Answer

SOURCE: 2001 Hyundai Santa Fe - Engine Code P1602, stuck in gear

Im having the same problem with my 02 Santa Fe. How do i go about fixing this problem? And is it costly? Please help

Posted on Jan 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 Santa Fe back wheel lockup when in reverse


ref: linkhttp://www.hyundai-forums.com/lc-2000-2005-accent/152405-tried-replace-rear-brake-shoes-drum-will-not-fit-after-new-shoes.html
The automatic brake adjusters work when the car is in reverse and you touch the brake. They should not lock the wheel however. An inspection of the rear brake assembly on both sides might show the problem. total brake repair might be appropriate on a car that age.

Dec 29, 2017 | 2005 Hyundai Santa Fe

1 Answer

I'm trying to find the location of the transmission fuse in my 2001 hyundai santa fe.


If the fuse blew the car would still have a gear to get you home by default, so the fuse is not the problem, but if you would like to check it is under the hood.

Dec 30, 2016 | 2001 Hyundai Santa Fe

1 Answer

2001 hyundai santa fe starts with one crank but won't go into drive or reverse, only goes into park and neutural what could be the problem? i have a 2001 hyundai santa fe 2.7 l v6 all wheel drive


You do have drive and reverse,if you have park and neutral.It just the transmission cant transfer that power a new or rebuilt is the solution

Mar 20, 2012 | 2001 Hyundai Santa Fe

1 Answer

My Hyundai Santa fee 2003 2.7L stays in D and does not change gears as I excelerated . Climbing a hill it goes up slow as the gear remains in D position .


As you travel down the road does it shift in other gear speed of just stays in that one gear and revs high.Check the fluid condition. Santa Fe uses a VSS to change gear as the RPM increases As you put the vehicle in drive it should gear select for you. The reason I want you to check fluid condition is to make sure the transmission has not failed.The fluid should not be dark like getting black.

Apr 22, 2011 | 2003 Hyundai Santa Fe

1 Answer

Car was running fine and then felt like the bottom fell out


you could have lost the oil going down the road and not even know it...it could be from a loose oil filter to a loose oil pan plug.

Jan 25, 2009 | 2003 Hyundai Santa Fe

Not finding what you are looking for?
2005 Hyundai Santa Fe GLS Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...