Question about Cars & Trucks

Open Question

Remove Rear Seat in gen 8 malibu - Cars & Trucks

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 59 Answers

SOURCE: how do i remove rear seat in a 2006 malibu

the bottom sections comes out first, and the bottom section is held in place by 1 of 2 ways.

1. bolts, look under the front of the seat if there are 2 bolts remove them if not

2. push the front edge of the seat backwards and lift up at the same time - it should unhook - do this on both sides.

Once the bottom portion is out the back will have bolts on the bottom remove then lift up.

Posted on Feb 23, 2009

Ad
  • 6468 Answers

SOURCE: remove cushion on drivers side seat 2004 malibu

the seat back has a strip along the bottom edge that over laps and holds it the bottom has clips around the outside edge

Posted on Aug 17, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drivers power seat will not move forward from full rear position.how do I access rear bolts to remove seat for repair? all seat switches work


I would look real careful under the seat and make sure that there is nothing obstructing the movement. Also check the tracks that it sleds on for pennies or anything else blocking it as well.

Sep 01, 2015 | 2005 Chevrolet Malibu

1 Answer

How do u remove the rear seat on 1196 honda accord?


The rear seat is four (4) pieces.
You will need two tools a 6mm and 8mm wrenches.
1.) Unbuckle the rear seat belts. 2.) Locate the bolt in the center part of the rear seat, between the cushion and the seat-back. Remove the bolt with a 6 mm socket wrench. 3.) Push down firmly on the front edge of the rear seat cushion and pull it toward you to unhook and remove the rear seat cushion. Push the seat belt stalks through the center holes and lift the cushion out of the Accord. 4.) Pull the lever on the side of the rear seat bolster to lower the rear seat-back, which must be in the down position to access its bolts. 5.) Slide the center seat belt toward the passenger side of the vehicle. Move the loop over the edge of the seat-back to prevent it from hindering removal. 6.) Remove the three bolts from the bottom edge of the rear seat-back, using an 8 mm socket wrench. One bolt is in the center; the other two bolts are on either side. 7.) Pull the rear seat-back out of the Accord. The remaining sections of the seat should be the two side bolsters. 8.) Remove the bolts from the bottom of the side bolsters with a 6 mm socket wrench. Push firmly against the first side bolster. Push it upward to slide it out of its mount. Repeat the process on the bolster on the other side to finish removing the Accord's rear seat.

This should take approximately 15-30 minutes depending hoe mechanically inclined a person is.

Sep 17, 2014 | 1996 Honda Accord

1 Answer

How to remove front passenger side seat


Always disable the air bag system first, to prevent accidental deployment of the air bags. The main airbag module is beneath carpeting under passengers seat. To remove passengers seat, At the rear of the seat remove the two bolts securing the tracks to the floor, tilt the seat up and towards the instrument panel, unplug any electrical connectors beneath and remove the seat. the front plastic track covers can remain in place while the seat track tabs are lifted out of the slots on the floor. ( caution disable airbag before removing the seat ) Good-Day! Hope this helps you!

Sep 12, 2014 | 2000 Chevrolet Malibu

1 Answer

My 06 malibu rear seat will not go down due to stuck switch


Push on the seat to the rear while pulling the cable release. Sounds like latch is adjusted too tight. If this works make adjustment before putting the seat back up. Open trunk & you should also be able to get to the speakers and the latch for the seat back. May require a screwdriver or something narrow & long to push on the latch arm while another person pushes & pulls the seat back to unlatch.

Chris

ASE Master Certified sense 1979

Feb 02, 2013 | 2006 Chevrolet Chevrolet Malibu

2 Answers

Drivers seat how do i take it out 2005 malibu drivers seat is sagging on the right rear


pry off any plastic bolt covers where the bolts secure the seat
pull 4 bolts securing seat to vehicles floor pan
Disconnect negative battery teminal,
disconnect any electrical plugs going to the seat
pull out drivers door opening

Aug 19, 2010 | 2005 Chevrolet Malibu

2 Answers

2004 Malibu with broken weld on seat motor


you will have to replace the complete assy. the cheapest way is look for a complete wrecking yard seat, or have yours welded at a local machine shop

Jan 08, 2010 | 2004 Chevrolet Malibu

2 Answers

Replacing fuel pump, car turn over but want start


the fuel pump should be under back seat after you remove seat lift carpet there is an access panel remove that next you should see ring that holds pump in tank spin this to remove unplug pump and replace

Jun 29, 2009 | 2003 Chevrolet Malibu

1 Answer

Fuel pump removal


Unless there is an access panel in the trunk, you will have to drop the tank.

May 31, 2009 | 2003 Chevrolet Malibu

1 Answer

How do i remove rear seat in a 2006 malibu


the bottom sections comes out first, and the bottom section is held in place by 1 of 2 ways.

1. bolts, look under the front of the seat if there are 2 bolts remove them if not

2. push the front edge of the seat backwards and lift up at the same time - it should unhook - do this on both sides.

Once the bottom portion is out the back will have bolts on the bottom remove then lift up.

Feb 23, 2009 | 2006 Chevrolet Malibu

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...