Question about Cars & Trucks

Open Question

I have recently did a 2lt 16v abf conversion on my golf 1...if it idles there's a heavy vibration I'm getting from the engine bay even wen I drive its vibrating.when I drive fast it goes away.I've checked front wheel bearings and exhaust....if its a mounting which 1 it is

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76164 Answers

SOURCE: Vibration in Steering Column at Idle

Engine vibration is the cause of this issue, it is the biggest complaint from many owners, changing the engine mounts will help, as mounts age the rubber gets hard and they don't absorb vibration like they should, new mounts help issue, but it will no stop it altogether. A faulty MAF will not cause vibration, just a hesitation on acceleration at times

Posted on Oct 07, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where does engine fan for polo 2002 BBY engine located


The radiator fans are located right behind the radiator and sit in the front of the engine bay between the radiator and engine.
You cannot see much of the radiator or the fans looking down from the engine bay because there is a plastic panel on the front of the engine bay just above the front grille that runs from one side of the engine bay to the other and hides most of the radiator and fans from top view. If you remove the plastic panel you will be able to see both the radiator and the fan unit from the engine bay. The cover panel is most likely secured with both screws and plastic fasteners or just the plastic fasteners. These can usually be popped out carefully to avoid breaking them as they are reused and any screws obviously need to be unscrewed to remove them.

POLO 1 4 16v 75BHP BBY Engine 64K Gearbox GET engine idle test

Dec 04, 2015 | Cars & Trucks

1 Answer

Tiburon 97 cold morning misses cant go pass 2000,3000rpm.idles till warm but still misses


Does it get to operating temperature? look at replacing the coolant thermostat and the engine coolant sensor. Clean the throttle body also. Inside.

Jul 25, 2015 | Hyundai Motor 1997 Tiburon

1 Answer

Does a 1.4 16 v vw golf have a maf


this is a later model and not a 1999 and as such it may need the engine diagnostics reading as such this vehicle has to be connected to the internet via dealers digital signature to source the problem ,even if you know what part you need and change it then it still needs programming in to the car computer this is out of the realms of a weekend mechanic and for that matter even a mechanic like myself ,so you will gin and bear it and pay the dealer and get used to this as the newer the car then the less can be done to it by anyone except the dealership.

Nov 22, 2013 | 1999 Volkswagen Golf

1 Answer

Hi i just bought a volkswagen golf 1.6 se 16v its done 107000 miles engine managment light come on put a tester on it and came up with codes p0171 and p0444 car drives fine but does not run right on idle...


All two trouble code means one think.Engine have not proper fuel mixture.First step-check EVAP/evaporator canister purge valve-open circuit/.If OK change the lambda sensor.

Aug 13, 2011 | 2001 Volkswagen Golf

1 Answer

VW Golf DOHC 14i 16V, hunting, starts and stops


There is a small vacuum pipe from the EGR solenoid that was disconnected, by reconnecting this pipe the problems (that I have had ever since I had a new head some 30,000 miles ago from a VW main dealer) have gone away.

Jan 16, 2010 | 1998 Volkswagen Golf

1 Answer

How to wire in vw abf engine 2.0L 16v in to fuse box.


You'll need to use the wiring from the 2.0L motor. Your best bet is to get Bentley manuals for the car the motor came from and for yours. They have very very detailed wiring diagrams, to do the swap.

Jan 10, 2010 | 1989 Volkswagen Golf

1 Answer

Vw polo vibrating inside the car??


Sounds like one of your engine or gearbox mountings are faulty or broken, Check them and try moving the motor with a long bar, if they are broken you will soon see it.

Oct 15, 2009 | 1997 Volkswagen Golf

1 Answer

1992 16V - idles fine, drives fine. Only when foot of the gas jer


idle air speed control valve(iac),too low idle or driveline problem like play in the drive shafts. if you put it in park and give it to say2500 rpm and let go of the throttle,does it return to 900rpm?if it dips down to 5 or 600 then to 900 the iac is bad.

Jul 13, 2009 | 1992 Volkswagen GTI

1 Answer

White smoke wen starts from cold an hunts 20 secs.


sounds to me like your idiling too high

May 28, 2009 | 1998 Volkswagen Golf

1 Answer

Vauxhall Astra 1.6 16v sxi w reg


cure the airleak and your fault will be gone!

Jun 04, 2008 | 2000 Volkswagen Golf

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...