Question about Cars & Trucks

Open Question

How to install brake light switch 2001 Ford expedition

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 9 Answers

SOURCE: 2001 ford expedition spark plug location

That's because they are hidden quite well. If you look at the engine, you'll see yellow plastic prongs (?) that look like spark plugs, but hook up to the silver tubing.  That's the fuel injectors.  BUT, right behind the yellow plugs, are black ones.  The black one is the connector to the spark plug.  The plug itself sits about 4 inches down into the block of the engine.  They are a real pain, and from what I can tell, you only have decent access to the first 2-4 of them, then they get too far back and start going under the dash (you'll see what I mean when you get there).

Posted on Aug 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My brake lights stopped working. I checked fuses and light bulbs. Still no brake lights.


Check for a switch on the brake pedal lever, the switch makes the brake lights work.

Sep 30, 2014 | 2001 Ford Expedition

1 Answer

No brake lights on 2000 ford expedition


does it have a trailer connector installed by uhaul or anything if it does possible corrosion in wires or a bad ground at rear of vehicle

Apr 04, 2014 | 2000 Ford Expedition

1 Answer

Ford Expedition 2001, #rd Brake lamp is not working please help.


At the central junction block, find 20A fuse 13 and check it. This fuse supplies power to the brake pedal position switch and switch output is applied to the three high mount stop lamps. If the regular stop lamps work when the brake pedal is pressed, the switch is OK. All three high mount stop lamps may have burned out

Sep 28, 2012 | 2001 Ford Expedition

1 Answer

I have a 2001 ford expedition an my brake lights is not working need helppppp


Have you checked the brake switch itself? Sometimes they twist off when working under the dashboard. if you have a tester or voltmeter, try checking for power on the green or green with red wire at the brake switch plug. If voltage is present when the brake is depressed, you might have a broken wire going to the back lights somewhere along the harness. Let me know.

Jun 20, 2012 | Ford Expedition Cars & Trucks

1 Answer

How replaced brake ligth switch on ford expedition 2003


make sure check brake light fuse first if brake light fuse okay.you replace brake light switch by removing trim panel below steering column.look under brake pedal area unplug electrical connector .remove the cotter pin and pull switch and power brake booster pushrod off the pin.then slide switch off power brake booster pushrod dont lose small nylon washer when installing new brake light switch.

Nov 13, 2011 | 2003 Ford Expedition

1 Answer

I have tail light and my blinkers work but i dont have brake lights!


Check the brake light switch behind the lever on your brake pedal. It may be loose, mis-adjusted or broken.

Apr 15, 2011 | 2001 Ford Expedition

1 Answer

I need good photos or instructions to change the brake light switch on a 1999 ford expedition


from autozone.com
f43af9d.gif Fig. 2 Brake pedal position switch removal- F-150, F-250, Expedition and Navigator; 1999-00 F-250SD, F-350, and F-Super Duty Models
  1. Disconnect the negative battery cable.
  2. Disconnect the brake pedal position switch.
  3. Remove the self-locking pin.
  4. Remove the brake pedal position switch from the brake master cylinder push rod.
  5. Remove the brake master cylinder push rod spacer.
  6. Remove the brake master cylinder push rod bushing.
  7. The installation is the reverse of the removal.

Sep 24, 2010 | 1999 Ford Expedition

1 Answer

Ford Expedition 2001 that wont shift out of Park


Shift Interlock System
The shift interlock system prevents the shifting from PARK unless the brake pedal (2455) is depressed. The shift interlock system consists of a shift lock actuator (3Z719) mounted at the base of the steering column tube (3514). If the ignition switch (11572) is in the RUN position, the shift lock actuator is continually on unless the brake pedal is depressed.

Thier is also the shift lock actuator ! plus wiring . You have a short to ground on that circuit . Do you know how to Find a short ? videos on youtube .
None of the power windows work ? Check for broken wires inside the rubber boot from the body to drivers door !
Videos on youtube for testing power window circuits .
How to test power window switch motor 1985 2001 Toyota

May 03, 2017 | 2001 Ford Expedition

1 Answer

Break lights are not working on my 2001 ford expedition


You need to replace your brake light switch which is located on your brake pedal. The reason that the right and left are out and the middle isn't is because there are two sides to the switch for vehicles with three brakes lights. It is a very easy part to replace and is relatively inexpensive. Change that switch out and you will be good to go. Let me know if you have any other questions. Thanks for rating my response and for using FixYa!

Jul 19, 2009 | 2001 Ford Expedition

1 Answer

FORD BRAKE LIGHT


check the connector at the brake switch located on the brake pedal lever arm if it is ok it is most likely a faulty switch

Dec 01, 2008 | 2003 Ford Expedition

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...