Question about Ford Fiesta

Open Question

Horn relay the horn on my 2010 fiesta econetic has just stopped working checked the fuses which seem ok. what do I do next?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 55 Answers

SOURCE: Car Horn

Try using a 12volt jumper wire directly to the horn from the car battery. also check the ground on the horn. The last thing I would do is pull the steering wheel cover. Make sure the horn is blowing first.

Posted on Aug 31, 2008

  • 200 Answers

SOURCE: 1986 toyota pickup horn malfunction

hi

Check whether power is coming to horn.

if ok means then check the horn

thank you

Posted on Oct 22, 2008

  • 84 Answers

SOURCE: 2001 jetta horn/wiper don't work

Is the airbag light on? Also is there any aftermarket parts like a distance starter or kill switch alarm on the vehicle?

Posted on Oct 31, 2008

  • 114 Answers

SOURCE: constant horn blowing

Very possibly the horn relay. This is located in the left junction block ( fuse panel) on the left side of dash. Open driver door and you will see a panel cover on the end of dash. On the cover it should list the position of the relay which I believe is on the right of fuse panel. If you try the horn and it sticks on again, try tapping the relay, if stops then that is the problem.

Posted on Mar 23, 2009

BCAS1298
  • 3092 Answers

SOURCE: horn stopped working, fuse and relay is good

With test light check voltage at horn assembly on both wire's, could only have one, horn assembly itself could be ground, have some one press horn button while checking, if there is voltage replace horn assembly, if no voltage horn pad at streeing wheel bad. that's being fuse and replay are good.

Posted on Jan 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The horn my nissan elgrand has stopped working i have checked the fuses they are ok


A bad switch or wire or connection of the wire to the horn. Try to jump a wire from positive termananl to the horn connection. If it
works the horn is ok. the problem is wire, possibly relay or connections. Back track the wire from horn to the next connection

Mar 15, 2015 | Nissan Cars & Trucks

1 Answer

Horn has stopped working on my 2006 Ford Explorer. The fuse seems to be fine. What could be the problem?


I would suspect an underhood fuse, the steering wheel clock spring, or a wiring problem. It's cheap to triple check all the fuses. The other two will require some troubleshooting to figure out. Since the horn works with the keyless entry, the relay, the horn, and its control wiring seem to be ok.

Sep 20, 2014 | 2006 Ford Explorer

1 Answer

The horn on my 2010 Santa Fe stopped working. Any suggestions or help


when pushing on the horn pad you may hear a click noise this tells you the circuit is good from the horn pad to the horn relay and out to the horn. find the horn and check for power at the horn terminal when the horn pad is pushed. if it lights up then replace the horn. if it doesn`t then you will have to check for a wire problem from the horn back to the relay. but horns are usually the problem.

Sep 17, 2014 | 2010 Hyundai Santa Fe

1 Answer

'96 jimmy's horn wont sound. Relays and fuses are ok and there doesn't seem to be anything wrong w/ the actual horns. Could this be related to a connection in the steering column or a small box locate


Are you sure the horns are ok? They are a pain to get at, but you should try a + jumper from your battery to a horn to make sure as they do tend to plug up with road crap. While you have the connector off a horn, you should also check the voltage with someone pushing the horn button. If both checks are successful, replace the horn relay.

Feb 18, 2014 | 1999 GMC Jimmy

1 Answer

Hi.my horn stop working.i check fuse and relay and its seems ok.mechanic told me to check sterring wheel.can someone tell me what to do?


Yes, on the steering handle there is the wire which is maybe not connected to the terminal. when you press the horn wire is not sending a signal via relay or directly to the horn.

Aug 16, 2011 | 2006 Ford Focus

1 Answer

The horn does not work


check the contact for the horn inside of the steering wheel and see if grounding the horn wire there to the shaft (ground) works the horn.

Jul 10, 2010 | 1999 Dodge Caravan

1 Answer

Constant horn blowing


Very possibly the horn relay. This is located in the left junction block ( fuse panel) on the left side of dash. Open driver door and you will see a panel cover on the end of dash. On the cover it should list the position of the relay which I believe is on the right of fuse panel. If you try the horn and it sticks on again, try tapping the relay, if stops then that is the problem.

Mar 21, 2009 | 1999 Dodge Intrepid

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...