Question about 2011 Ford Transit Connect

Open Question

Need to remove steering wheel of 2002 ford transit horn does not work

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 28 Answers

SOURCE: 1998 Ford windstar horn wiring

There is something called a clock spring in the column that is used for the airbag, horn and cruise control buttons. This clock spring if messed with will cause a/bag light to come on and possibly cause a/bag failure if there is a collision. DON"T mess with the wiring in the column. Run new wires in to the horn or install an a/market horn.

Posted on Aug 29, 2008

Ad
  • 11 Answers

SOURCE: Horn not Working, Ford Fiesta zetec 55

its most probably the clock spring which you need to take the steering wheel off to fit

Posted on Mar 07, 2009

polarcycle
  • 1392 Answers

SOURCE: '94 Ford Econoline (RV)... cruise control and horn

You need a new clock spring assembly.

Posted on Jul 10, 2009

  • 436 Answers

SOURCE: the horn and cruise control doesn't work,fuses are

the horn input to ground is located in the cruise control module. if they both don't work then your cruise control module or the clockspring coil for the steering wheel needs to be replaced. If airbag lights is on as well then I would change the clockspring coil first.

Posted on Oct 02, 2009

joshnaz
  • 186 Answers

SOURCE: free fuse box diagram for ford explorer 2002 XLT

Heres the definitions of the fuse numbers:
graphic.aspx?mod=reptiff&module_id=1&session_id=%7b812b1a44-e9f7-498d-9233-3843c35aa6d4%7d&image_guid=00323000&print_bw=0& graphic.aspx?mod=reptiff&module_id=1&session_id=%7b812b1a44-e9f7-498d-9233-3843c35aa6d4%7d&image_guid=00323003&print_bw=0&

Posted on Feb 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Horn honking when car is turned off


have to remove airbag to fix this

Aug 16, 2012 | 2003 Mitsubishi Lancer

1 Answer

My horn doesnt work and my steering wheel is loose down on the inside of the steering calum. could the steering wheel be the problem for the horn not working?


it may well be the problem, you will need to remove the steering wheel to find why is has come loose, it might be a bearing that has collapsed & needs to be replaced or something may have broken......hope this helps......cheers.

Sep 05, 2011 | Ford Crown Victoria Cars & Trucks

1 Answer

My horn on my 2002 ford explorer went off and would not stop honking until we hit the middle of the steering wheel.....is the horn connected to the air bag or seperate. is it a censor in the steering...


If you have an aftermarket burgler alarm in it i would check wiring where it was installed. If not it is probably a malfunction in the contacts in the steering wheel. If checking the steering wheel unhook the battery and let it sit for a few minutes. It is always good to do this so the air bag will not deploy.thanks

Feb 28, 2011 | 2002 Ford Escape

3 Answers

How do you troubleshoot a defective horn 2001 ford crown victoria?


Find the horn and use a test light to try to ground out one of the two terminals to see if it sounds. If it does, then the horn is ok, but it may be the switch in the steering wheel.

To test the steering wheel switch, take the horn cover off of the steering wheel and search for the lead for the button and try to ground it out. It may sound if you do this. If it does, then there is something wrong with the button connection at the clock spring.
---
Here are instructions on how to remove and replace the steering wheel which can help to understand how to troubleshoot the horn switch which is related to the clock spring electrical connector:

Steering Wheel Removal & Installation To Remove:
NOTE: Make sure the wheels are in the straight-ahead position. Disconnect the battery ground cable and wait at least one minute.
WARNING
To avoid the risk of serious personal injury, read and follow all warnings, notes and instructions in the deactivation procedure. Deactivate the supplemental restraint system (SRS).
  1. Remove the driver side air bag.
  2. Disconnect the clockspring electrical connector.
  3. Remove and discard the steering wheel bolt.
  4. Use steering wheel puller and remove steering wheel.
CAUTION
Removing the steering wheel without using a puller can damage the column bearings. Using a suitable puller, remove the steering wheel.
Remove the steering wheel while routing the wires from the clockspring through the steering wheel.
WARNING
To avoid the risk of serious personal injury, read and follow all warnings, notes and instructions in the reactivation procedure. Reactivate the supplemental restraint system (SRS).
To Install:
  1. Install steering wheel, while guiding wires from clockspring through.
  2. Install new steering wheel bolt. Tighten to 30 ft. lbs. (40 Nm).
  3. Connect the clockspring electrical connector.
  4. Install the driver's side air bag.
prev.gif next.gif

Oct 11, 2010 | Ford Crown Victoria Cars & Trucks

1 Answer

Why does my horn start to hook for no reason


usually caused by button on steering wheel breaking or the wire grounding out somewhere in the column. You have to remove the steering wheel with a puller to see what's wrong. If you need instructions, please let us know.

Oct 04, 2010 | 2002 Ford Explorer

1 Answer

I have a 2002 Yukon Denali and I was wanted to know, how do u change the bulb in the steering wheel?


Steering Wheel Control Switch Assembly Replacement Removal Procedure
  1. Remove the steering wheel. Refer to Steering Wheel Replacement .
    399638.gif
    tif.gif
  2. Remove the horn switch from the steering wheel.
    755486.gif
    tif.gif
  3. Remove the steering wheel shroud retaining screws from the back of the steering wheel.
  4. Remove the steering wheel shroud from the steering wheel.
    408596.gif
    tif.gif
  5. Remove the steering wheel control switch mounting screws.
    780085.gif
    tif.gif
  6. Disconnect the steering wheel control switch (2) electrical connector (1).
    408598.gif
    tif.gif
  7. Remove the steering wheel control switch from the steering wheel.

Steering Wheel Replacement Tools Required J 1859-A Steering Wheel Puller
Removal Procedure
  1. Disable the supplemental inflatable restraint (SIR) system. Refer to Disabling the SIR System in SIR.
  2. Remove the inflator module. Refer to Inflatable Restraint Steering Wheel Module Replacement in SIR.
  3. Remove the horn switch. Refer to Horn Switch Replacement - On Vehicle .
  4. Make an alignment mark in order to note the relationship of the steering wheel to the steering shaft.
  5. Remove the steering wheel nut.
    374820.gif
    tif.gif
  6. Remove the steering wheel, using the J 1859-A .
Installation Procedure

Oct 04, 2010 | 1995 GMC Yukon

1 Answer

2002 explorer horn inop


In most cases this problem is caused by the rotating ribbon circuit contact under the steering wheel having a broken filament, the part is known as a clock spring contact, u will need to properly disarm the airbag and remove the steering wheel to access the part. WARNING: Failure to disarm the airbag system can result in an unexpected Airbag deployment and possible serious personnel injury disconnect the battery 30 minutes prior to start of work.

Mar 29, 2010 | 2002 Ford Explorer

1 Answer

Only one side of steering wheel works the horn what is the problem (ford explorer 1998)


It is only the contact switch at the other side that is not working. Unscrew the cover at the steering wheel such that you can see and clean the horn contact switch if it is still present. Sometimes the horn
contact switch get dusty, you just clean it up, and it's OK. It it got
broken, you can replace it. Am I right, just e-mail the answer and
vote for the solution.

Sep 25, 2009 | 2002 Ford Explorer

1 Answer

My horn isnt working on my 2002 zx2 ford , the fuse is good. in


Check the horn relay, it is located under the dash near the fuse box. I believe it is on a white box. You may need to purchase a new relay or there could be a problem with the horn button in the steering wheel/column. Check relay first.

Apr 03, 2009 | 2002 Ford ZX2

1 Answer

My steering wheel is loose.


your steering wheel has splines . they strip or worn cant tighten have to replace steering wheel . it has a nut under the horn pad .it might have come loose. but i have never seen one come a lose. but i have known the splines wear on them. disable air bag in steering wheel before removing steering wheel.

Mar 31, 2009 | 2002 Ford Escape

Not finding what you are looking for?
2011 Ford Transit Connect Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5530 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...