Question about 2001 Ford F150 Styleside SuperCrew

1 Answer

Truck bogs down when shifted into gear, o/d off light blinking, fuse #23 was blown, replaced, continues to blow. Any solutions?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 5,495 Answers

This is due to an O2 wire shorting out. It can be laying on an exhaust manifold or around the 1/2 shaft of a 4x4. When this circuit fails, it also controls trans shifting. The bog down is likely due to the trans not shifting into the proper gear.

Posted on Oct 17, 2013

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: # 15 fuse keeps blowing on a Ford f150 2003 model

try a #20 amp fuse

Posted on Apr 23, 2009

  • 1 Answer

SOURCE: brake switch fuse keeps blowing

I Have the same problem with my 97 ford keeps blown fuse 15 amp,when I step on the brake pedal,to shift out of park it blows the fuse.can someone help me out what to look for.I replaced the switch on brake pedal that wasn't it.

Posted on Nov 07, 2009

csmock132
  • 4669 Answers

SOURCE: blinking overdrive light , not shifting

Have the vehicle scanned.The overdrive light is like the check engine light for the transmission. There are transmission codes in the ecm if the overdrive light is blinking.

Posted on Mar 27, 2010

Testimonial: "thanks for your help"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wont rev 3000 rpm


You can continue replacing parts at random or have a competent diagnosis made to identify probable causes of the problem(s).

Mar 24, 2014 | 1997 Nissan Pickup

1 Answer

Automatic transmission not shifting gears


Replacing any fuse after it has blown ,your almost
guaranteed it will blow again

At least you know the circuit with the problem

Now you go to factory wiring diagrams, to see what that
fuse controls & do some testing

Have to have wiring diagrams,be able to read them & know
basic electricity & be able to test your vehicle,then you have
to be able to continue on with professional tools, once the fuse
issue is resolved, if the fuse keeps blowing every few days

You could have wiring issues,more likely inside the trans in the oily
environment ,you could have solenoid or module failure or mechanical trans issues

I would say you can't resolve at home,need professional help

Mar 14, 2014 | Ford Expedition Cars & Trucks

16 Answers

Overdrive off light flashing


I had problem(ford escape 6V 3.0 4x4 2002 )with the OD light it was on, transmission looked crazy and it engaged different speed for itself . The problem was that the sensor( high speed ) was wet and rusted ,this sensor is attached to the transmission box , it is inside in new models, the cost is 75 dollars and the labor cost 99 dollars..

May 15, 2013 | Cars & Trucks

1 Answer

1998 grand Marquis blows out Fuse 13. This shuts off power to the instrument cluster and shutting the Headlights, only when the Variable Control iss in the "Auto" position. In the "On " position th


(1998 Gr. Marquis) I just found the culprit of my fuse #13 for the speedo, temp and votage gages. I had to remove the gear shifter cover which was not difficult also the metal brace across the bottom and the ignition key, but it was a tiny exposed burr in the overdrive shift button wire just at the end of the gear shift leaver. I elec. taped it up and now, no more blown fuse!

Feb 28, 2013 | 1998 Mercury Grand Marquis

3 Answers

Brake switch fuse keeps blowing


replace your brake pressure switch on the master cylinder and that should take care of your problem.

Jun 04, 2009 | 1997 Ford F150 Regular Cab

1 Answer

97 Chevy truck cluster and transmission


I would say its your Ignition switch or the fuse for tranny is blown or the tranny is unplugged.My truck had a problem where it was stuck in third gear, the tach never moved,the gear indicator light went out.I left it at the tranny shop all day and nobody could find the problem.All you need to do is check your fuses with a test light.I looked at all my fuses and they were all good but when I used a test I found that some fuses didnt have power supplied to them from the ignition switch.Your fuses need power on both sides to complete that circiut.So I would say go get a test light because they are cheap and check your fuses before you go right back to the parts store for that ignition switch.Good Luck

Apr 06, 2009 | 1997 Chevrolet C1500

1 Answer

2004 nissan titan, shift lever locked in park. Also slip light on, also stop brake fuse is blown and have no brake lights. Replaced stop brake fuse but keeps blowing. Also replaced switch on brake pedal...


Hello gary823

Thank you for choosing fixya.com.

First things first: I suggest taking your truck to a mechanic or an auto parts store that can do a diagnostics test done. If any fuses or relays are blown, this test should bring up any codes that would indicate any type of malfunctions.

The shift lever being locked: In newer vechicles, the brake pedel, as you know must be pressed in order for the transmission to be put into gear. There should be a sensor on the transmission that runs in cahoots with the brakes. This sensor tells the computer what gear the transmission is in. It is very possible that at the last time you put the vehicle in Park, that the switch had it's final moment of ability. If the sensor is in fact useless, it may be the reason the transmission is locked into Park. It may be the reason why the brake lights aren't working; and why the brake lights fuse is blowing. Also, check all relays, (can be tested with a fuse tester) and make sure all relays are good as well. Make sure also that the light sockets for the brake lights, tail lights, back up lights, and front running and blinker lights are in good condition. One faulty socket, can cause more than one bulb to blow, or cause fuses and relays to blow as well. Follow the wiring for the brake lights for as far as you can to ensure there is no damage (melted, broken, etc.). This could also affect fuses. This truck I see is barely 5 years old, but you'd be surprised how quickly parts and wiring and such will go bad, or wear out and/or just quit working.

If the transmission sensor is not the problem, and all fuses and relays are good. tranny fluid is full, check the linkage under the truck. It may be jammed somehow, or stuck. On the transmission, where the lever inserts, there is a seal - inside that seal, there is like a gear that the lever pushes in order to shift from gear to gear etc. You may need to have that checked out to make sure it's not broken inside. If your fluid is low, or empty, you may have froze up your transmission, however, you most likely would have been seeing large amounts of fluid in the frequent places you park. Another think to check is your differentials. Make sure the fluid is full in each, as well as the seals not leaking. The seal sits just inside the inner most part of the pumpkin (differential ball) where the yoke is inserted. Maybe you have just locked up the rear driveline. Check the seal on the front end of the driveline as well, (goes into the rear of the transmission (yoke). Check your U-Joints as well, making sure they are intact, tight. It may be a good idea to have them replaced if they look supsicous in any way.

These are all the things I can think of that would make your truck be stuck in park, and make your lights not work, and blow fuses.

I sincerely hope this information is useful and aides in the successful repair of your truck. Thank you again for choosing fixya.com. Please let me know if I can be of further assistance, or if you have any more questions or concerns (comments).

Thank you again,

carsandcomps
Guru, fixya.com
Oregon

Apr 06, 2009 | Nissan Titan Cars & Trucks

3 Answers

1997 TOYOTA 4RUNNER SR5 WON'T SHIFT OUT OF PARK


I had the exact same problem. It is the fuse for the brake lights ( a red 10 amp fuse) that is blown. It was the wiring in the trailer that caused it to blow. Replace that fuse and it will work perfectly!!

Mar 19, 2009 | 1998 Toyota 4Runner

2 Answers

95 chevy k3500 will not shift into 4hi


Hi ..i had the same same problem in my k3500,check 4x4 fuse first .if thats blown replace it if blows when you put in 4x4 go under the car and unplug the actuator at the front diff.go back in the cab and put another fuse in, shift into 4x4 if the fuse does not blow this time you will need a new actuator.
thats what happened with mine and now 4x4 is sweet.i thought mine worked to at the start until i got bogged and noticed my front wheels wernt turning.

Jan 24, 2009 | 1995 Chevrolet K3500

3 Answers

9 codes on my diagnostic tool


Did you ever get a solution for this? I am having the same problem, same codes!!!

Jul 08, 2008 | 2001 Ford Expedition

Not finding what you are looking for?
2001 Ford F150 Styleside SuperCrew Logo

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...