Question about 2005 Nissan Murano SL

1 Answer

2005 Murano doors won't lock/unlock with remote or door switch... Would think it was an actuator if it was one door but all 4 try to work but don't seem to be getting enough power... There is no other electrical issues going on with the car... Any ideas what might be causing the issue?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 4,018 Answers

Try this put key in ignition turn to number 2. then press the fob. when the door lock press again to unlock them should work of from there. remeber to replace the battery in the fob first.

Posted on Oct 17, 2013

Testimonial: "The fob works fine... the doors try to lock/unlock but won't go completely actuate... that is you can hear them try to move but they don't seem to be getting enough power to completely lock/unlock"

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 6 Answers

SOURCE: 2005 Murano windows open by themselves

I had that happen too and found out that if you hold the unlock button down on your FOB for about 4-5 seconds then it will roll down the front windows. It's actually a feature, not a problem. You may have accidentally mashed something up against the FOB while it was in your pocket and you were within range of the car. That's what I did. Freaked me out the first time I walked out in the driveway and both front windows were down and I know I didn't leave them open.

Posted on Jul 21, 2009

s_s_m_o_k_i_
  • 162 Answers

SOURCE: 2003 Nissan Murano Driver door won't lock or unlock with keyfob

about 14 bux at this link
http://www.autopartswarehouse.com/search/?N=5716+776&Nr=AND(wpn_tl_name:Auto+Body+Parts+%26+Mirrors,wpn_scat_name:Door+Lock,wpn_cat_name:Doors+%26+Components)&refType=Brand&refValue=Replacement

Posted on Jul 31, 2009

  • 86 Answers

SOURCE: Nissan Murano (05) Power Locks Sticking

The door lock actuator in that door is weak. Need to replace it.

Posted on Feb 04, 2010

  • 1 Answer

SOURCE: My nissan murano back door won't open?

were you able to get this resolved ? if yes, can you please share the solution..i too have the same problem with my 2003 Murano.

Posted on Feb 23, 2010

  • 1 Answer

SOURCE: 2005 nissan murano door lock

The Body Control Modual is not recieving a feed back from the passenger door lock confirming the unlock command and is therefore not energizing the rear hatch. There is no physical lock on the hatch - just yes or no for power from the BCM.

Posted on Jul 19, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Murano back doors will not lock or open at times with or without the the remote


I would think the door lock actuator motors are sticking, they are very lightly built little toys.

Sep 12, 2016 | 2005 Nissan Murano

1 Answer

2004 chevy malibu driver and passenger door lock problems


The locks on your vehicle are electronically controlled by the BCM - body control module . The driver an passenger door switche's are input's to the BCM . Do you know anything about automotive electronic's ? anti theft alarm remote, could this be part of the problem , No it's just a key less entry remote , nothing to do with the anti-theft .
Door Lock System Components
The Power Door Lock System consists of the following components:
• Body control module (BCM)
• Driver door lock switch
• Front passenger door lock switch
• Door lock actuators in each of the doors
• IBCM (PWR) 15-amp fuse

Door Lock System Controls
The Power Door Lock System is controlled by the body control module (BCM) and can be activated by any one of the following:
• A door lock switch Lock or Unlock actuation
• A keyless entry transmitter actuation
• An automatic door lock actuation
• An automatic door unlock actuation
• A last door closed locking (LDCL) actuation

Driver and Passenger Door Unlock Operation w/o Keyless Entry
When the body control module (BCM) detects a transition of either of the door lock switches to the Unlock position, it switches the door lock actuator unlock control circuits to voltage. Since the door lock actuator lock control circuit is at ground potential within the BCM, the driver passenger door lock actuators transition to the Unlock position.

Your best bet , take your vehicle to a qualified repair shop ! Need special tool to diagnose .

Power Door Locks Inoperative

Install a scan tool.
Turn ON the ignition, with the engine OFF.
With a scan tool, observe the door lock switch parameter in the Doors data list.
Does the scan tool display Idle?
YES - Go to Step 4
NO - Go to Step 8
4
Activate the driver door lock switch to the LOCK and UNLOCK positions.
Does the scan tool display Idle?
YES - Go to Step 9
NO - Go to Step 5
5
Activate the front passenger door lock switch to the LOCK and UNLOCK positions.
Does the scan tool display Idle?
YES - Go to Step 9
NO - Go to Step 6
6
With a scan tool, observe the driver door lock actuator command and the passenger door lock actuator command parameters in the Doors data list.
Activate a door lock switch to the LOCK and UNLOCK positions.

Dec 24, 2017 | 2009 Chevrolet Malibu

1 Answer

2002 Expedition driver door won't lock/unlock with remote


This sounds like you may have a bad lock actuator, there is an actuator that controls the lock, it may need replacing, you will need to remove the door panel to gain access to it, then with a testlight you will test to make sure the actuator is getting power and a ground and if it tests good for power and ground then replace it and door lock will start working again, this part is about 30.00 dollars. here is a picture of it. good day3_10_2013_6_17_11_pm.jpg

Mar 10, 2013 | Cars & Trucks

1 Answer

Doors won't lock, thinks key in ignition


Troubleshooting is required to inspect few parts.It can be issue with ignition switch.Its not getting off.Or issue with sensor or wiring.Or its faulty lock itself.Click the link below and follow the troubleshooting:----Driver Door will not lock or unlock with Key or Remote? http://whatisbyme.blogspot.in/2012/05/1998-toyota-landcruiser-driver-door.html
----------
Driver side door will not lock or unlock with Remote? http://technoanswers.blogspot.in/2012/04/2009-toyota-tundra-driver-side-door.html
---------
Central locking not working ? http://schematicsdiagram.blogspot.in/2012/03/this-is-how-system-operates.html

--------------
Remote will not unlock Rear door ?
http://schematicsdiagram.blogspot.com/2011/12/remote-will-not-unlock-rear-door-on-gmc.html


---------

Repairing car Door lock Actuator?
http://howtobyme.blogspot.com/2011/11/repairing-car-door-lock-actuator.html

--------

How to Access car door panel?
http://howtobyme.blogspot.com/2011/11/how-to-access-car-door-panel.html

-----

Vehicle door panel components?
http://howtobyme.blogspot.com/2011/11/vehicle-door-panel-components.html

-----------
This will help.
Thanks.

Jul 17, 2012 | 2002 Subaru Outback

1 Answer

I have a 2005 Hyundai Elantra when trying to lock or unlock doors from either the remote or drivers side master switch passenger side doors will work, but drivers side doors front or back will not lock or...


door lock actuator might be faulty or bad electrical contact
take off the door panel and diconnect and reconnect the wiring, you might need to change door lock actuator

Dec 26, 2017 | Hyundai Elantra Cars & Trucks

1 Answer

Passenger door and liftgate do not open with remote control or door panel control both start at the same time nissan murano 2005 s model


Liftgate is connected to front RH's door actuator thru back door's "opener switch". Replacing the passenger's door lock actuator will solve the problem.

Jul 25, 2010 | 2007 Nissan Murano SE

2 Answers

2003 Nissan Murano Driver door won't lock or unlock with keyfob


The key fob is the remote. But the remote type that works like a key. The remotes that you just need to carry on you to start the car or truck. That is a Key Fob.

Thanks Jay!

Jul 30, 2009 | 2005 Nissan Murano

2 Answers

2003 Honda Pilot Rear door lock not working


I have a 2004 honda pilot.The passinger door and the back door behind the driver seat will not lock or unlock with remote or with door lock switch,What can I do to fix it?

Sep 18, 2008 | 2003 Honda Pilot

2 Answers

Nissan Murano 2005 SL keyless entry remote programing, got a used remote, how can I program it?


Close all vehicle doors, LOCK doors using drivers side switch.

Insert key all the way into the ignition, (do not turn) remove key.

Repeat this step 5 times. (6 total)

Hazards should flash to indicate program mode.

Press any button on transmitter to be programmed, hazards should flash to indicate successfull program.

*For additional remotes, cycle drivers door lock UNLOCK, LOCK, press any button on remote, hazards should flash. Repeat step as necessary.

Ignition ON, (engine off) ignition OFF, UNLOCK using drivers side switch, test remotes.

Source

Aug 06, 2008 | 2005 Nissan Murano

Not finding what you are looking for?
2005 Nissan Murano SL Logo

Related Topics:

316 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

80339 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...