Question about Honda Prelude

1 Answer

I was changing the fuel filter on my 92 Honda prelude and I bent/cracked the line coming into the filter and I was hoping I could cut off the fittings for my stock filter, buy an in line filter and fuel hose with clams to fix it, to help make servicing in the future easier because the stock filters that use those copper washers are too much of a hassle to get to seal.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 205 Answers

Best to fix it right buy a new fuel line .An inline filter couldnt handle the pressure cause with fuel injection you have alot more fuel pressure and using clamps you are risking your life with a good chance of a fire

Posted on Oct 18, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 337 Answers

SOURCE: Fule filter location for a 92 honda accord ex

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528005f265

Posted on Dec 08, 2008

  • 1 Answer

SOURCE: Mazda B4000 Fuel Filter replacement

remove the bracket from around the filter, and remove the clip from the fuel line, and it should pop right off.

Posted on Dec 23, 2008

  • 42 Answers

SOURCE: 92 camry fuel filter location

look under the air filter box, bolted to the framerail

Posted on Dec 28, 2008

  • 548 Answers

SOURCE: fuel filter changed and now fuel line is airlocked

try taking off the line where it meets the efi housing and running the pump until the burping stops

Posted on Aug 25, 2009

  • 25 Answers

SOURCE: mercedes E300 turbodiesel, 1999, is poor to start

Yes sir , you have a failing valve, soon it will snap in two....please have your head checked. You can do this yourself by placing a long-handed screwdriver , business end down to each cylinder while pressing your ear to the handle(while engine is running)...you will notice a definite difference when you hit which cylinder has the bad valve. Also makes sure the egr valve is clean and your exhaust recycle valve is not stuck.( located in the crossover pipe)

Posted on Aug 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

92 perlude wont stay running afther new timeing belt was installed


when you installed your timing belt did you make sure all the marks on your pulley and cam where lined up also need to make sure no valves bent in the head.

Feb 17, 2013 | 1992 Honda Prelude

1 Answer

92 honda prelude no compression


if is a H22a4 or h22 motor, u need to get the timing marks lined up then put the belt on, make shure it is a h22 bent and not a F22 SOHC belt

Feb 11, 2013 | 1990 Honda Prelude

1 Answer

Where is the auxillary fuel filter on 1984 honda prelude


there are only two fuel filters on the car, one in the engine compartment if you are faceing the car from the front it will be coming from the firewall on the left side next to the heater hoses, look for a red braided hose and you will see the brass looking filter in line on the red hose. the other one is behind the LEFT rear wheel, take the wheel off and you will see the filter next to the shock. it may have a small basket on it so you will need to remove the basket and you will see the filter right there. it will be a white plastic one. hope this is helpful good luck

Feb 16, 2011 | 1984 Honda Prelude

2 Answers

WHAT IS THE VALUE OF A 1987 HONDA PRELUDE


Low retail valve $1950.00
Average clean and in good condition $3100.00
High retail valve $4375.00
Hope this was very helpful

Jan 20, 2010 | 1987 Honda Prelude

1 Answer

Have a 1989 honda prelude si cant find fuel filter


Carbureted engines: Two filters; a small one is in the fuel line under the hood; a larger one is located at the rear, just inboard of the left rear wheel.
Fuel-injected engines: the filter is located in the engine compartment, against the firewall, just to the left (as you face the engine) of the throttle housing, and slightly lower (follow the fuel line from your fuel rail, where your injectors are, back to it). It has two fuel lines (in and out) going to it, and it is held in place by a clamp which bolts it to the firewall.
Hope this helps you find it.

Nov 07, 2009 | 1989 Honda Prelude

1 Answer

92' Honda prelude doesn't start


Change ignition module in distributor. If it is actually starting and stopping right away, and the fuel filter is good, it will be the MAF. Mass air flow sensor. But if it was that it probably wouldn't start even after an hour. Sounds more like the module. You can change the whole distributor if that's easier for you. If it was me, i'd get one from a wrecker.

Sep 25, 2009 | 1992 Honda Prelude

3 Answers

Locating and changing the fuel filter.


you can pull fuel injector fuses and remove the gas cap but try to start it a few times so it relieves the pressure that was there...if it does not work on some honda i put a rag underneath the fuel rail and open the large bango nut that connects the line to the fuel rail just crack it 3/4 turn till it leaks a little and let it squirt out the pressure just wear eye protection its pretty easy fuel filter to do..

May 10, 2009 | 1990 Honda Prelude

1 Answer

Idle probs


Check your idle control valve. You might have to replace it, 80-90 bucks new. Or see if there is an air leak from the intake manifold. had the same problem.

Jun 04, 2008 | 1992 Honda Prelude

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...