Question about Jeep Grand Cherokee
Lock the doors with a key and unlock
Posted on Nov 22, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
To program a remote... note that you must not delay more than 10 seconds between any of the operations.
Driver's door open, all other doors closed, key removed from the ignition switch.
Insert key into ignitions switch, then remove it.
Press LOCK then UNLOCK on the vehicle door lock control switch at 1 second intervals 5 times.
close and re-open drivers door.
Press LOCK and UNLOCK on the vehicle door lock control switch at 1 second intervals 5 times
Insert Key into ignition switch.
Switch ignition ON and OFF once to program a remote transmitter code while retaining the original codes or twice to program a remote transmitter code while erasing the original codes. three times to check how many remote transmitters are currently registered, or 5 times to erase all registered codes.
Remove Key from ignition switch.
System should now lock and unlock vehicle. Once, twice or five times depending which mode has been selected. It will lock and unlock one to four times slowly, to indicate the number of remote transmitters registered if you chose option 3.
Press and hold remote transmitter LOCK and UNLOCK buttons at the same time.
Press LOCK remote button for 1 second: System should now lock and unlock vehicle once to confirm, twice to indicate registration has failed.
NOTE: to exit programming mode, close drivers door or insert key in the ignition.
NOTE: a maximum of 4 remote transmitters can be programmed
Posted on Oct 13, 2008
I had the same problem and had to kinda figure it out on my own. I have a 98 grand cherokee and I think they should be the same. Inside the drivers door panel there are 3 buttons... a number 1 and number 2 and a SET button. Hold down the set button for a couple seconds then release. Then adjust your settings on your seat and mirrors to what you want...Then press # 1. If you have another person that will be driving the car do the same and press number 2...
The thing is...........There are 2 key chain things issued with each car...One will be the number 1 driver, the other one is the number 2 driver...So...I would program the number 1 driver first and see which key chain thing works...then you will know the other one will be for the number 2 driver.
Hope that made sense...It is a great feature once you finally figure it out. Sheri
Posted on Mar 30, 2009
if you have an original working fob and your owner's manual,it will explain procedure,otherwise will have to go to dealer to be programmed
Posted on May 17, 2009
SOURCE: honda ridgeline key fob program
If it is a factory keyless system than you do need it done by the dealer, but if it is an after market system then reply back with manufacture and model.
Posted on Oct 17, 2009
Tips for a great answer:
Apr 07, 2014 | Jeep Grand Cherokee Cars & Trucks
Jan 22, 2014 | 1996 Jeep Grand Cherokee
Jun 22, 2011 | 1997 Jeep Grand Cherokee
Sep 27, 2010 | 1995 Jeep Grand Cherokee
Aug 11, 2010 | 1995 Jeep Grand Cherokee
Sep 02, 2009 | 1995 Jeep Grand Cherokee
Jul 06, 2009 | 1995 Mercedes-Benz C-Class
Apr 29, 2009 | Jeep Grand Cherokee Cars & Trucks
105 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: