Question about Cars & Trucks

2 Answers

I installed the alarm but it won't disarm. The alarm sounds everytime I open the driver door.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 62 Answers

Check the connection that was made to the courtesy light and/or door switches. Clean any electrical contacts that cross doors, like in the boot, if any.

Posted on Oct 16, 2013

  • bruce_jones1 Oct 24, 2013

    This system uses the original remotes. I have a wire that says connect at ACC off port and one that says ACC input. The input wire I connected to a wire that's only hot in Accessory but I don't know where the other one goes.

×

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

  • Cars & Trucks Expert
  • 225 Answers

With the key? or with a remote? What model car is it? Some alarms kits have an override harness for new cars that have coded keys

Posted on Oct 16, 2013

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Factory installed alarm won´t deactivate

Open the door insert key in ignition. turn to on

Now hold down the red button which should be flashing, untill silent

this will deactivate the alarm.


Posted on Jul 16, 2008

  • 102 Answers

SOURCE: my 1999 jetta remote has stopped working.

you should be able to turn off alarm via key in drivers door if not test all doors to make sure they unlock. if any door will not lock that door latch will need replaced if work ok then try disarming alarm from trunk key or from the passanger door. if that works,you may need to have the key recoded to the car.

Posted on Apr 04, 2009

  • 10 Answers

SOURCE: disarm alarm on a 2004 sonata

If you use your keyfob to lock the doors, it will activate the alarm, and you will need to unlock with the keyfob. If you lock the doors with the lock button on the inside of the door, it should not activate the alarm.

Posted on Dec 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 98 kia sportage wont start


It sounds like the key sensor in the drivers door is malfunctioning, the drivers door is the only door that can enable/disable the alarm, if you try to unlock any of the others it will trigger the alarm.

Sometimes with my Kia I have to (without opening the door), cycle lock and unlock several times before the alarm is disarmed.

Have you tried this is succession, with all the doors locked:-

put the key in the drivers door, turn to lock and then to unlock, the alarm should disarm.

Also, if any of the door locks are jammed, the alarm will still activate when you try to unlock the drivers door.

If that fails and the alarm still activates, then it's a problem with the key sensor in the door.

Mar 30, 2014 | 1998 Kia Sportage

1 Answer

How do you reset the alarm on a 1999 toyota camry if i dont have the remote locking mechanisim


Operation of the theft deterrent system is discussed in the 1999 Toyota Camry Owner's Manual beginningh on page 21. Unlocking the door with the key should disarm the alarm system. If it does not disarm when using the key, there are only two possibilities:

> You have an aftermarket alarm system installed in addition to the system tht was provided by the manufacturer and they are interfering with each other.

> OR

> Your vehicle needs service to correct the malfunction.

You might try unlocking the car from the passenger side or use the key to open the trunk first to see if this works. If it does, the switch inside the driver door is probably malfunctioning.

Apr 07, 2012 | 1999 Toyota Camry

1 Answer

Alarm button broken. Cannot disarm alarm. What do I do? Chrysler Town & Country LX 2003 model.


You can arm or disarm alarm manually with the key at the drivers side door, turn the key to open the locks and the alarm must be disarmed.

Nov 01, 2010 | 2003 Chrysler Town & Country

2 Answers

How to disarm car alarm


HOW DO I DISALRM ALRM CAR WONT START 04 IMPALA

May 09, 2010 | 2001 Nissan Pathfinder

1 Answer

I cant start my 03 f 150 because the anti theft wont let me. i undid the battery to clean it and now everytime i hook the posative back up the alarm goes off


You may want to check manual, or call dealer for disarm procedure, but some are disarmed by key in drivers door, (lock and/or unlock, some are passenger door) Try key in drivers door, turn left then right.

Jan 20, 2010 | 2003 Ford F150 Regular Cab

1 Answer

Alarm goes off when I open the door wheather locked or unlocked


On internet there is a manule, disarm the Anti-Theft system. Check door and trunk switches re-engage system.

Jul 29, 2009 | 2002 Dodge Intrepid

1 Answer

99' Mitsubishi Galant OEM Alarm Disarm?


There is no way to beat factory alarms because they are there to stop exactly what you are trying to do. You need to get a dealership to fix it. They may well have seen the fault before and have the diagnostic software as well.

It sounds like a simple switch problem.

Apr 06, 2017 | 1999 Mitsubishi Galant

1 Answer

Ford Escort Alarm - Annoying Problem!


it seems that the contact circuit in the driverside door is the problem, it's obviously not the alarm itself others wise the same thing would occure on the passengerside. you have to remove the door panel on the driverside and inspect the wires in that circuit for corrosion which would cause no current to pass between the by pass switch the arms or disarms the alarm. please rate this

Oct 09, 2008 | 1996 Ford Escort 4 Door

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...