Question about Cars & Trucks

Open Question

Keihin carb parts diagram L23A

Show me a diagram for a keihin carburator, i may have put a part in wrong

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
grpffel
  • 62 Answers

SOURCE: I would like to know if you have a carter carburator diagram for a 2bbl carb

Www.carter.com ask for exploded views of your carb you'll need the tag number on the carb. Its relatively easy to do as long as your float level is correct or google carter carberators using the tag number

Posted on Feb 06, 2015

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

?HOW DO I SET THE CARBURATOR RODS IN PROPER ORDER SO I CAN START IT PLEASE?


on what vehicle and engine --also stock or aftermarket carb

Aug 02, 2016 | Cars & Trucks

1 Answer

I would like to know if you have a carter carburator diagram for a 2bbl carb


Www.carter.com ask for exploded views of your carb you'll need the tag number on the carb. Its relatively easy to do as long as your float level is correct or google carter carberators using the tag number

Feb 06, 2015 | Cars & Trucks

1 Answer

How to rebuild a 1987 plymouth gran fury 2 barrel carburetor


First, you will need to get a rebuild kit for it. This contains gaskets and other bits that wear and need replacing on occasion. There will be a number on a tag or the carb body that the parts store will need to get the right kit. There's no point in trying to reuse the old gaskets, if you are going to try that, then don't waste your time rebuilding.

The kit will contain a sheet of paper whjich will give you an exploded diagram of all the parts in your carburator and where they belong. there will also be information on various settings for idle, choke, etc. Don't lose these sheets.

When you start to disassemble the carb, keep the old gaskets to compare with new ones. When you remove the idle screws, turn them in until they stop. Be gentle when you do this and count the number of turns. Write that number down, so when you put it back together you know where the idle setting is supposed to be. There will be extra gaskets in the kit and they will all be different. You must replace with exactly the same as what you took off. Also pay very close attention the how the choke linkage comes apart. It will go together more than 1 way so you can get it wrong. This will make the car act up or maybe not even start.

Soak the carb in a good quality cleaner and make sure everything is clean and all the lines are open before you start to reassemble it.Use your diagrams to make sure you put everthing back where it belongs, replacing with new parts when possible. Be very careful with the float measurement, it must be exact, close won't work.

This is going to take you several hours, so don't be in a rush.

Nov 21, 2013 | Plymouth Gran Fury Cars & Trucks

1 Answer

Will u show me diagram of carburator if it has one on a 1997 olds 88


no carb on that car look for a 1 1'/2 '' can with a vacuum line sounds like the fuel pressure regulator failed

Aug 26, 2012 | Cars & Trucks

2 Answers

How to rebuild a 22r carburetor


This Carb was using in Toyotas (i.e. 87 PickUp), according with this, check this removal ans installing ptocedure.

1 Disconnect the negative battery cable.
2 Loosen the radiator drain plug and drain the coolant into a suitable container.
3 Unscrew the mounting screws and remove the air filter housing. Disconnect all hoses and lines leading from the air cleaner.
4 Tag and disconnect all fuel, vacuum, coolant and electrical lines or hoses leading from the carburetor.
5 Disconnect the accelerator linkage from the carburetor. On cars equipped with an automatic transmission, disconnect the throttle cable linkage running from the transmission.
6 Remove the four carburetor mounting bolts and lift off the carburetor and its gasket.
Cover the manifold opening with a clean rag to prevent anything from falling into the engine.

7 Install the carburetor (with a new gasket), tighten the mounting bolts EVENLY in steps and reconnect all linkage.
8 Start the engine and check for any leaks. Check the float level.

10_7_2011_8_05_35_pm.jpg

Fig. Exploded view of the carburetor-22R engine (click THIS LINK for zoom)
In addition, I suggest visit THIS LINK for other details.

Hope this helps (remember to rating this free answer).

Oct 07, 2011 | 1985 Toyota Pickup

2 Answers

Carb is leaking it looks like accelerator pump. truck still runs not sure if there is a gasket i could replace.


Hi!!

There is a carburator rebuild kit that you can get at the AutoParts store for your vehicle. Runs about $25 and it has a diagram and step by step instruccions on how to rebuild the carburator yourself. If you don't feel comfrortable doing it, take it to a carburator shop for rebuilding. It is cheaper if you take the carb. by itself. Before removing carb. take a few pictures of the hoses and linkage n mark each hose and electrical connection removed, this will make your life a lot easier when you install it back.

Don't forget to rate this answer, Good Luck.

Apr 27, 2010 | 1986 Dodge Ram 50

1 Answer

Took apart carburetor and can not get it back together


Your best bet would be to go to the auto parts store and get a rebuild kit for your carburator. You can't reuse carb gaskets anyway and the kit will include a blow up diagram of the carb with the parts that need to be replaced and steps to make sure you have the proper settings inside.
Carburators are precise so all measurements they give you in that kit are exact.Take your time. If you took the idle screws out of the front be very careful when you put them back in. Just turn them until the stop, DO NOT tighten them after they stop on the seat.They are soft and will lose their shape, making it hard to properly adjust. Hope this helps and good luck.

Mar 06, 2010 | 1985 Ford F150

2 Answers

I want to spray carb cleaner in my 89 Jeep Wrangler:


No you do need a diagram, remove the airfilter, have some one start the car with high idle rpm and spray in the throat of the carb and also on the outside, that will do it, if not get a carburator kit, and remove clean, change gaskets of the carburator

Aug 16, 2009 | 1989 Jeep Wrangler

1 Answer

Eagle one lawn mower?


normally, if it is a spring that just pulls back the cable of the carburator, then try to look at the end of the cable and look for small holes where the spring could be attached and then pull the cable and on the opposite direction of the pull, look for another hole on the stationary parts of the carb where you think the spring could be attached.
then test the lawn mower for its proper operation.

i hope i was able to help,

tnx 4 using fixya,

drcool

Aug 15, 2008 | 2007 Eagle Talon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...