Question about Citroen Cars & Trucks

Open Question

The front Fog Lights not working on my Citroen C2 Cool. Is thera fuse or relay

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: Headlights

I READ ONLINE THAT THERE WAS A RECALL ON THIS YEAR AND MAKE, CHECK WITH TOYOTA WEB SITES TO RECTIFY YOUR PROBLEM

Posted on Jul 25, 2008

  • 11 Answers

SOURCE: 98 Jeep Cherokee Fog lights

It's definitely the switch...I bought two of 'em so far...known bug. I don't use the fog lights as much anymore , but the "Airtex" oem equivalent switch from Rockauto seems to be holding up well. If you dissamble your broke switch you'll probably see evidence that it is beginning to melt and theres alot, maybe too much, grease, which may or may not have been the cause of the bad, heating contacts inside switch.
If I remember right, even though the foglights have a relay there is still full amperage going through the switch or something....don't qoute me on that last statement.

Posted on Feb 14, 2009

alicantecoli
  • 22095 Answers

SOURCE: Wiring front fog lights to a 2002 freelander ES.

Do not fit these lights yourself,you must take the vehicle to the dealer to have it done .Firstly as vehicle wasnt factory fitted you need the original homoglonation certificate from the manufacturer for the model with the foglights fitted,then you need a installation project drawn up by certifide auto engineer with the relevent technical qualifications (i have them) then they can only be fitted by a garage with an added value tax certificate,then vehicle must be presented to the local vehicle inspection depot to be mechanically inspected all over weither its due or not,the relevant paperwork plus the fee presented ,then a new vehicle registratrion document issued showing the changes.Failure to to this will cause the vehicle to fail its inspection when next presented as paperwork isnt correct ,the lights are ilrevelent as to weither they work or not,but if fitted from new they must work.Also if stopped by the guardis civil and paperwork checked,and they notice then you risk having the vehice impounded their and then on the spot ,big fine and the cost of the removal truck.

Posted on Mar 15, 2009

  • 22 Answers

SOURCE: front fog lights not working

if the fuse on the driver side panel is good,and the relay under the dash is good then check your connections or your bulbs

Posted on Jun 08, 2009

  • 3 Answers

SOURCE: renault grand espace phase 3 fog lights wont work

Broken wire at the stalk should be white remove the covers

Posted on Jun 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Citroen picasso 57 plate. I always have lights on automatic, yesterday I lost dipped beam, still have side lights, main beam and front fog lights. Could this be as simple as a blown bulb or might it be an...


A fuse is the cheapest place to start but it may be the low beam module that has failed . Check if there is a relay in the circuit that may ne at fault.

Jan 12, 2014 | Cars & Trucks

1 Answer

My NISSAN NV200 2011 front fog lights do not work.


Both fuse and relay are located in engine compartment fusebox.
Click the link below to go through fuse box diagram:----

http://schematicsdiagram.blogspot.com/2013/02/nissan-fog-lamp-relay-and-fuse-box.html


-------
This will help.
Thanks.

Feb 14, 2013 | Cars & Trucks

1 Answer

Citroen Xantia fog and reversing lights not working


Check Fuse F3. It supplies 12v to the reverse switch located on the transmission. If auto transmission (4HP14) the switch will have 4 pins, 2 for reverse light, 2 for starting circuit. If manual, it has two pins. When gear is in other position, only one pin will have 12v. When gear is in R, both pins will have 12v. The 2nd pin supplies directly to the reversing light. Fog light has connectors behind the bumper. It tends to get corroded. Disconnect and clean both side of the connectors and retry. Some may get the wires snapped. Check there first. Fuse F18,F7 and F6 supplies 12v to the foglight circuit. F6 supplies to the foglight relay. Check the relay too.

Apr 05, 2012 | Citroen Xantia Cars & Trucks

1 Answer

Saxo rear fog light working and front fog lights not working


try changing the relay for the front fogs,the front and rear are not connected in any way,check the fuse box lid for relay location ok

Jan 29, 2012 | Citroen Saxo Cars & Trucks

1 Answer

Front fog lights not working


if the fuse on the driver side panel is good,and the relay under the dash is good then check your connections or your bulbs

Jun 01, 2009 | 2002 Volvo S60

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Citroen Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14195 Answers

Are you a Citroen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...